CEF14
Charge Sizes: AA , AAA Value Charger for NiMH Batteries
Technical
NiMH
Battery Charger: |
Class 2, Integrated Power Supply |
|
|
Plug: |
Direct Plug-In Matches Local Requirements |
|
|
Battery Type/Fit: |
NiMH: 2 or 4 AA/HR6, NiMH: 2 or 4 AAA/HR03 |
|
|
Typical Weight: |
207 g |
|
|
Input: |
100-240V AC, 50-60 Hz, 7w |
|
|
Output: |
AA/HR6: 3.0V DC 360 mA |
|
AAA/HR03: 3.0V DC 180 mA |
|
|
Operating Temp: |
0°C - 35°C (32°F - 95°F) |
|
|
Dimensions: |
123 mm (H) x 72 mm (W) x 42 mm (D) |
|
|
BENEFITS Great Value, New Sleek & Compact Design, Convenient Wall Plug-In
FEATURES Independent Channel Charging
•Fully Charges cells in 6 hours*
•Charges both AA and AAA NiMH cells
•Ensures a full charge regardless of charge or battery capacity
LED Indicates Charge
•Red = Charging
•Green = Complete
•Flashing Red = Error/Abnormal battery or abnormal temperature
Maintenance Charge Keeps Cells Fresh
International Charge Capabilitydevice can be used worldwide with suitable converter plug
SAFETY Microprocessor Controlled
•Charge termination based on –dV/dt, temperature, and/or built-in timer
•Over-temperature shutoffprevents overheat of cell
•Primary cell protectionwill not charge non-rechargeable batteries
•Low voltage battery protectionprevents overheat and damage to cell
•Power protection circuitresets whenever a battery is removed
BATTERIES
Berkshire Corporate Park
Bethel, CT 06801 U.S.A.
Tel: Toll free 1.800.544.5454 Web: www.duracell.com
*Charge rate and time is dependent on cell capacity, discharge state, and operating temperature.
Information and contents in this data sheet are for reference purposes only. They do not constitute any warranty and representation is subject to change without notice. For most current information and further details, please contact Duracell.
Document #: CH-A