Duke TM-SK User Manual
SUGGESTED SPECIFICATIONS FOR CONVEYOR
MODEL TM-SK
Gravity Wheel Conveyor to be
model TM-SK, NSF approved commercial kitchen conveyor.
Conveyor to be fitted with 2” diameter Nylon Wheels with Delrin self-lubricating hubs. Wheels
furnished in removable aluminum frames for cleaning. Wheels installed in staggered pattern for
maximum tray contact.
Conveyor Bed to be constructed of 14-gauge, 300 series stainless steel with square channel rim on both
sides and flat ends notched for easy tray removal. Polish stainless steel to a #3 finish.
Conveyor supported by 1-5/8” 16-gauge stainless steel tubing Legs with welded stainless steel cross
rails. Leg frames fitted into enclosed, round stainless steel gussets welded to stainless steel channel
braces and fitted with stainless steel adjustable bullet feet.
Optional UL Listed Electrical Raceway constructed of 16-gauge, 300 series stainless steel with #3
finish. Raceway furnished with removable top cover and fitted with properly sized receptacles and
stainless steel face plates, pre-wired to a panel box at the end of the conveyor. Panel box to be housed
in stainless steel enclosure fitted with locking stainless steel hinged door.
Conveyor shall be NSF approved. E
SOUTHERN ENGINEERING SYSTEMS by Duke Mfg Co.,
quipment built in an ISO 9001:2000 approved manufacturing
facility.
St. Louis, MO 63012
Ph 314-231-1130
Fax 314-231-5074
www.dukemfg.com
5/07
BY
"Your Solutions Partner"
2305 N. Broadway
Optional Accessories
Table Top Mount Construction Movable Over Shelf _____Dbl.
Flanged Feet Stationary Over Shelf _____Dbl
Mobile Package (Note: Max 100Amp Main Cord & Plug.) Stationary Under Shelf
Stainless Raceway & Panel Box Removable Under Shelf
1-1/4” Rolled Rim Sides
Open Bed Construction (Side rails only, held
together with ends and cross channels.)
Curved Skatewheel Section
1-1/2” Open Liquid Drain
1-1/2” Lever Drain
Other ______________________
Shipping Wt. xx lbs./Linear Ft.
COMMENTS/NOTES __________________________________________________________________
N
I
M
U
O
TYPICAL CURVED
SKATEWHEEL SECTION
1'-7"
1 1/4"1 1/4"
"
8
4
M
U
M
I
D
S
I
T
S
U
I
D
A
R
E
1 5/8" O.D. 16 GA. S.S. TUBING LEGS
LEGS TO BE SECURED TO DUKE UNIT.
DUKE TO PROVIDE MOUNTING HARDWARE
TABLE TOP
ROLLER SECTION
We reserve the right to change specifications and product design without notice. Such
revisions do not entitle buyers to corresponding changes, improvements, additions or
replacements for previously purchased equipment.
Loading...