Duke TM-GR User Manual

SUGGESTED SPECIFICATIONS FOR CONVEYOR

MODEL TM-GR

Gravity Roller Conveyor to be

model TM-GR, NSF approved commercial kitchen conveyor.

Conveyor to have full width 1.9” diameter PVC Rollers with non-corrosive bearings and stainless steel
shafts, mounted on 4” centers in removable, stainless steel channel frames.

Conveyor Bed to be constructed on #14 gauge, 300 series stainless steel with square channel rim on
both sides and flat ends notched for easy tray removal. Polish stainless steel to a #3 finish.

Conveyor supported by 1-5/8” 16gauge stainless steel tubing Legs with welded stainless steel cross
rails. Leg frames fitted into enclosed, round stainless steel gussets welded to stainless steel channel
braces and fitted with stainless steel adjustable bullet feet.

Optional UL Listed Electrical Raceway constructed of 16 gauge, 300 series stainless steel with #3
finish. Raceway furnished with removable top cover and fitted with properly sized receptacles and
stainless steel face plates, pre-wired to a panel box at the end of the conveyor. Panel box to be housed
in stainless steel enclosure fitted with hinged, locking, 18 gauge stainless steel door.

Conveyor shall be NSF approved. E

SOUTHERN ENGINEERING SYSTEMS by Duke Mfg Co.,

quipment built in an ISO 9001:2000 approved manufacturing

facility.

2305 N. Broadway
St. Louis, MO 63012
Ph 314-231-1130
Fax [phone]
www.dukemfg.com

BY

"Your Solutions Partner"

5/07

Optional Accessories

 1.9” Diameter Stainless Rollers  Flanged Feet
 PVC 5/8” Diameter Mini Rollers  Mobile Package (Note: Max 100Amp Main
 Stainless 5/8” Diameter Mini Rollers Cord & Plug. with Optional Raceway )
 Stainless Raceway & Panel Box  Curved Roller Section
 1-1/2” Open Liquid Drain  Split Rollers @ Turn
 1-1/2” Lever Drain
 1-1/4” Rolled Rim Sides  Movable Over Shelf _____Dbl.
 Open Bed Construction (Side rails only, held  Stationary Over Shelf _____Dbl
together with ends and cross channels.)  Stationary Under Shelf
 Table Top Mount Construction  Removable Under Shelf
 Other ______________________

Shipping Wt. xx lbs./Linear Ft.

COMMENTS/NOTES __________________________________________________________________

1'-7"

1 1/4"

SPLIT ROLLERS

AROUND CORNER

TYPICAL CURVED
ROLLER SECTION

MIN. 24" RAD.

AT CENTER LINE

SS TUBING LEGS SECURED TO UNIT

W/ HARDWARE FURN. BY DUKE

1 1/4"

TABLE TOP

ROLLER SECTION

We reserve the right to change specifications and product design without notice. Such

revisions do not entitle buyers to corresponding changes, improvements, additions or

replacements for previously purchased equipment.