Dual XD6320 User Manual

INSTALLATION/OWNERS MANUAL

AM/FM/CD Receiver with Detach Face

XD6320

2

XD6320 INSTALLATION

Preparation

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Please read entire manual before installation.

Before You Start

• Disconnect negative battery terminal. (consult a qualified technician for instructions)

• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Remove 2 transit screws located
on top of the unit.

• Insert the supplied keys into the
slots as shown, and slide the unit
out of the mounting sleeve.

• Install mounting sleeve into
opening, bending tabs to secure.

• Connect wiring harness and
antenna. (consult a qualified
technician if you are unsure)

• Certain vehicles may require an
installation kit and/or wiring
harness adapter (sold separately).

• Test for correct operation and slide
into mounting sleeve to secure.

• Snap trim ring into place.

• Mount the iplug™ adapter to any
smooth clean surface using the
supplied double-sided tape or
#2 x 3/8” Phillips head screws.

3

XD6320 INSTALLATION

Wiring Diagram

FUSE

When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD6320 uses one
10 amp ATM fuse located
beside the wiring connector.

4

XD6320 OPERATION

Control Locations

Release

Power

Volume

Band/Play/Pause

Mode

Auto Store/Preset Scan

Tune/Track Down

Eject

Tune/Track Up

Display

EQ

1

2

3

4

5

6

7

8

9

10

11

Tuner Scan

Local/Distance

Preset 6

Preset 5

Preset 4

Preset 3/Intro

Preset 2/Random

Preset 1/Repeat

Audio

Loudness

Mute

12

13

14

15

16

17

18

19

20

21

22

2122 20 19 18 17 16 15 14 13 12 11

1 2

3

4 5

6

7

8 9 10