PC4936/PC5936
Intercom System Instructions
This sheet explains the features of the PC4936/
PC5936 audio system. You can page, answer
pages, answer the telephone or doorbell, and monitor another area at any interior audio station. Interior audio stations look like this:
Do Not Disturb light
Do Not Disturb button
Page/Answer button
Paging
You can use the audio system to call (page) other
people on the premises. Only one page can take
place at a time.
To page someone:
Press on any interior audio station.
Talk into the audio station. The system broadcasts
your voice to all other interior audio stations.
To answer a page:
Press on any other interior audio station.
The system sets up a private communication link
between the paging and answering audio stations.
When the microphone is active on your audio station, the Do Not Disturb (DND) light will turn on.
To end a page:
Either person can press on their audio
station.
To cancel a page:
Press a second time.
The page will automatically be cancelled if there is
no response in 30 seconds.
Responding to a Page Handsfree
If your system has been set up to allow handsfree
responses to a page, all audio stations will be able
to communicate with the paging station for 30 seconds without pressing the Page/Answer button.
To respond to a page handsfree:
Once the page tone is heard, talk into the closest
audio station. You do not need to press the Page/
Answer button.
To talk longer than 30 seconds:
Before the 30 seconds are up, briefly press
on the closest audio station to establish a
private communication link.
NOTE: The handsfree feature will not work if
there is already a page in progress, a telephone
call is in progress or if the monitor feature is
active.
Do Not Disturb
To avoid hearing pages, doorbell calls, telephone
calls or monitoring, put the audio station on 'Do
Not Disturb'.
To put an audio station on Do Not Disturb:
Press .
The red light on the station will turn on.
To take a station off Do Not Disturb:
Press again.
The red light on the station will turn off.
Answering the Doorbell
Your system may have one or
more doorbell stations (as shown
at left).
The doorbell station has only one
button, a call button. Doorbell
stations cannot receive pages,
monitor or receive telephone
calls.
To use the doorbell station:
Press the button on the station. All the interior
audio stations will chime. If you have 2 doorbell stations in different locations, they can
activate different chimes. This will help you
identify where the call is coming from.
To answer a doorbell call:
Press on any interior audio station. A
private communication link is established
between the doorbell station and the audio station that answered.
Doorbell While on Page
If a page is in progress when a doorbell is
pressed, only the two persons on the page will
hear the doorbell tone.
To answer the doorbell while on page:
Either person can press on their
audio station.
The page is disconnected and the person who
pressed the Page/Answer button is immediately
connected to the doorbell station.
Opening the Door (Using Doorstrike)
If your system has been set up for doorstrike
operation, when you answer a call from a doorbell station, you can open the door near the
doorbell.
To open the door:
Press and hold on the interior audio
station for 2 seconds.
The system sounds an acknowledgement beep
and the door opens.
Answering the Doorbell “Handsfree”
If your system has been set up to allow handsfree responses to doorbells, all audio stations
will have 30 seconds to communicate with the
doorbell station which initiated the page.
To respond to a doorbell handsfree:
When you hear the doorbell, talk into the closest audio station. You do not need to press the
Page/Answer button.
To talk longer than 30 seconds:
Before the 30 seconds are up, briefly press
on the closest audio station to estab-
lish a private communication link.
CAUTION: Do not hold the Page/Answer button for more than 1 second, to avoid accidentally opening the door (see Opening the Door).
NOTE: The handsfree feature will not work if
there is already a page in progress, a telephone
call is in progress or if the monitor feature is
active.
Monitoring
You can use the Monitor feature to broadcast
one interior audio station to all the other interior audio stations on the premises. For example, this may be useful for monitoring a baby in
a room.
Interior audio stations can still be used to initiate/answer pages, annunciate and answer the
doorbell and answer telephone calls. If a conversation is in progress, the Monitor feature
will not operate until the conversation is ended.
To turn on the Monitor feature:
1. Go to the audio station in the room you
want to monitor.
2. Press and hold for at least 2
seconds. The Do Not Disturb light
flashes and the station is put in Monitor
mode. All sound in the room will be
transmitted to all the other interior
audio stations.
To turn off the Monitor feature:
At the audio station being monitored, press
once.
Answering Telephone Calls
When the system detects an incoming telephone call, all interior audio stations enabled to
ring will sound a ringing tone.
NOTE: All interior audio stations can answer
an incoming telephone call regardless of
whether the station rings or not.
To answer a telephone call:
Press and hold for 1 second.
• page someone to answer the call at another
intercom station - press , then talk
into the station to page.
Another user can pick up the call on another
interior audio station by pressing
once.
Call Waiting
To answer a second telephone call while on
line with the first call, press briefly.
The first call is put on hold and you can talk to
the second caller.
To return to the first call, press
again.
The system sets up a private communication
link between the station where the button was
pressed and the telephone call.
To hang up a telephone call:
Press for 1 second.
If the person calling hangs up first, the audio
station will hang up after 30 seconds of silence.
Answering a Telephone Call While
Paging
If a page is in progress when a telephone call is
detected, only the two persons on the page will
hear the ring tone.
To answer a telephone call while on page:
Either person can press and hold for
1 second on their audio station.
The page will be disconnected and the person
who pressed the Page/Answer button will be
immediately connected to the telephone call.
Transferring or Holding Calls
Once you have answered a call at the interior
audio station, you can:
• put the call on hold - press once.
After the call is on hold, you can:
• transfer the call to an in-house telephone pick up the telephone and press [#].
User Help
If your system has been set up for User Help,
the Escort4580/Escort5580(TC) Audio Assistant can instruct you over the audio system.
Press and hold the Help function key on the
closest keypad for two seconds. The Audio
[Help] will begin prompting.
NOTE: The volume level of User Help can be
adjusted by increasing or decreasing the volume of the Escort4580/
Escort4580 or
Escort5580(TC); see the
Escort5580(TC) Instruction
Manual.
Background Music
Your system may have been set up so that
background music can be broadcast to all interior audio stations which are not in the Do Not
Disturb mode. To turn the background music
on or off, perform the following at any system
keypad:
1. Press [*][6].
2. Enter your [Master Code].
3. To turn the music on or off, press [0][4] for
Maxsys or [9] for PowerSeries Systems.
NOTE: Refer to the system keypad for model.
NOTE: If both the Monitor feature and the
background music feature are active at the
same time, the Monitor feature will override
the background music.
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months
from the date of purchase, the product shall be free of defects in materials
and workmanship under normal use and that in fulfilment of any breach of
such warranty, Digital Security Controls Ltd. shall, at its option, repair or
replace the defective equipment upon return of the equipment to its factory.
This warranty applies only to defects in parts and workmanship and not to
damage incurred in shipping or handling, or damage due to causes beyond
the control of Digital Security Controls Ltd. such as lightning, excessive
voltage, mechanical shock, water damage, or damage arising out of abuse,
alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original purchaser, and is and
shall be in lieu of any and all other warranties, whether expressed or implied
and of all other obligations or liabilities on the part of Digital Security Con-
trols Ltd. This warranty contains the entire warranty. Digital Security Controls Ltd. neither assumes responsibility for, nor authorizes any other person
purporting to act on its behalf to modify or to change this warranty, nor to
assume for it any other warranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct or
indirect or consequential damages, loss of anticipated profits, loss of time or
any other losses incurred by the buyer in connection with the purchase,
installation or operation or failure of this product.
Warning: Digital Security Controls Ltd. recommends that the entire system
be completely tested on a regular basis. However, despite frequent testing,
and due to, but not limited to, criminal tampering or electrical disruption,
it is possible for this product to fail to perform as expected.
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security
Controls Ltd. could void your authority to use th is equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is enco uraged to
try to correct the interference by one or more of the follow ing measures:
• Re-orient the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: "How to Identify
and Resolve Radio/Television Interference Problems". This booklet is available from the
U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-00 0-00345-4.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a
label that contains, among other information, the FCC reg istration number of this equipment.
NOTIFICATION TO TELEPHONE COMPANY The customer shall notify the telephone
company of the particular line to which the connection w ill be made, and provide the FCC
registration number and the ringer equivalence of the protective circuit.
FCC Registration Number: F53C AN-31477-KX-N
Ringer Equivalence Number: 0.1B USOC Jack: RJ-31X
Facility Interface Code: 02LS2 Service Order Code: 9.0F
TELEPHONE CONNECTION REQUIREMENTS Except for the telephone company
provided ringers, all connections to the telephone network shall be made through standard
plugs and telephone company provided jacks, or equivalent, in such a manner as to allow
for easy, immediate disconnection of the terminal equipment. Standard jacks shall be so
arranged that, if the plug connected thereto is withdrawn, no interference to the operation
of the equipment at the customer's premises which remains connected to the telephone network shall occur by reason of such withdrawal.
INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to
the telephone network, the telephone company shall, where practicable, notify the customer that temporary disconnection of service may be required; however, where prior
notice is not practicable, the telephone company may temporarily discontinue service if
such action is deemed reasonable in the circumstances. In the case of such temporary discontinuance, the telephone company shall promptly notify the customer an d will be given
the opportunity to correct the situation.
ADDITIONAL TELEPHONE COMPANY INFORMATION The security control panel
must be properly connected to the telephone line with a USOC RJ-31X telephone jack.
The FCC prohibits customer-provided terminal equipment be connected to party lines or
to be used in conjunction with coin telephone service. Interconnect rules may vary from
state to state.
CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The telephone company may make changes in its communications facilities, equipment, operations or procedures, where such actions are reasonably required and proper in its business.
Should any such changes render the customer's terminal equipment incompatible with the
telephone company facilities the customer shall be given adequate notice to the effect
modifications to maintain uninterrupted service.
RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the quantity
of devices that you may connect to your telephone line and still have all of those devices
ring when your telephone number is called. In most, but not all areas, the sum of the RENs
of all devices connected to one line should no t exceed five (5.0). To be certain of the number of devices that you may connect to your line, you may want to contact your local telephone company.
EQUIPMENT MAINTENANCE FACILITY If you experience trouble with this telephone
equipment, please contact the facility indicated below for information on obtaining service
or repairs. The telephone company may ask that you disconnect this equipment from th e
network until the problem has been corrected or until you are sure that the equipment is
not malfunctioning.
Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094
© 2001 Digital Security Controls Ltd.
www.dsc.com
Printed in Canada 29003578 R003
Loading...