DOD Mini Expression Pedal Owner’s Manual

Mini Expression Pedal

Eects Processor

Owner’s Manual

Thanks for purchasing the DOD® Mini Expression Pedal, the miniature passive expression pedal that
gives you a full range of expressive control, without robbing you of valuable pedalboard space.

Features:

• Small form factor occupies minimal pedalboard space

• Long-throw treadle for full range of control

• High-quality, high-cycle 25kΩ potentiometer for smooth expressive control

• Impedance switch changes from 25kΩ (top/bottom) to 10kΩ (middle) to accommodate Line
6®-style CC inputs

• Removable rubber feet for pedalboard mounting

• 1/4” jack with selectable TS, TRS, or RTS operation

• Skid-free treadle pad

• Rugged construction

Setup:

1. Connect your cables (see connection diagram below).

2. Select the correct cable connection setting (TS, TRS, or RTS) for the device you wish to control.
(See the owner’s manual for the controlled device to determine the proper setting.)

3. Push the DOD Mini Expression Pedal’s treadle toe down.

4. Congure the controlled device for the desired type of expression control.

In

Out InExp. In

Exp. Out

See the owner’s manual for the controlled

device to determine the proper cable to

use with the expression pedal.

Out

****IMPORTANT USAGE NOTE****

The two hex screws on the bottom of the pedal are part of a spring-loaded adjustment
mechanism. If over time you experience slop, loosen these screws slightly and then re-tighten.
This will cause the main engagement gear to re-tighten against the treadle gear.

DO NOT remove these screws or operate the treadle while the screws are loosened. This can
cause the gears to become misaligned and cause the pedal to malfunction. There are no user-

adjustable components inside the pedal. Under no circumstances should the pedal be

opened up.

PN: 5091807-00-Bdod.com

DECLARATION OF CONFORMITY

DÉCLARATION DE CONFORMITÉ

Manufacturer’s Name: DOD
Manufacturer’s Address: 10653 South River Front Parkway, #300
South Jordan, Utah 84095, USA

Declares that the product:

Product name: DOD Mini-Expression

Product option: None

Conforms to the following Product Specifications:

Safety: N/A – no power

EMC: Analog Products

The DOD Mini-Volume and Mini-Expression pedals by design provide
an adequate level of intrinsic immunity as called out in EN55024. By
following good engineering practices and engineering rational Harman
declares that by design these pedals will provide an adequate level of
intrinsic immunity and will operate as intended in their environment.

Supplementary Information:

The product herewith complies with the requirements of the:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
RoHS Directive 2011/65/EC
WEEE Directive 2002/96/EC
EC Regulation 278/2009

C. Rex Reed
Director, Engineering
Signal Processing
10653 South River Front Parkway, #300
South Jordan, Utah 84095, USA
Date: June 26, 2017

European Contact: Your local DigiTech Sales and Service Office or

Harman Signal Processing
10653 South River Front Parkway, #300
South Jordan, Utah 84095, USA
Ph: [phone]
Fax: [phone]

Nom du fabricant : DOD
Adresse du fabricant : 10653 South River Front Parkway, #300
South Jordan, Utah 84095, ÉTATS-UNIS

déclare que le produit :

Nom du produit : DOD Mini-Expression

Option du produit : Aucune

est conforme aux spécifications suivantes :

Sécurité : S/O – sans pouvoir

CEM : Produits Analogiques

Les pédales DOD Mini-Volume et Mini-Expression par conception fournissent
un niveau adéquat d’immunité intrinsèque tel qu’indiqué dans EN55024.
En suivant les bonnes pratiques d’ingénierie et l’ingénierie rationnelle,
Harman déclare que, grâce à la conception, ces pédales fourniront un
niveau adéquat d’immunité intrinsèque et fonctionneront comme prévu
dans leur environnement.

Informations complémentaires :

Ce produit est conforme aux exigences suivantes :
Directive sur la basse tension 2006/95/CE
Directive CEM 2004/108/CE
Directive RoHS 2011/65/CE
Directive DEEE 2002/96/CE
Règlement 278/2009 de l’CE

C. Rex Reed
Directeur, Ingénierie
Traitement des signaux
10653 South River Front Parkway, #300
South Jordan, Utah 84095, ÉTATS-UNIS
Date : 26 juin 2017

Contact en Europe : Votre bureau local de vente et de service DigiTech ou

Harman Signal Processing
10653 South River Front Parkway, #300
South Jordan, Utah 84095, ÉTATS-UNIS
Tél. : [phone]
Fax : [phone]