DOD VCC-1
VOLUME CONTROL PEDAL
USER’S GUIDE
Congratulations, and thank you for your purchase of the DOD VCC-1 control pedal. The VCC-1 offers smooth, effortless operation, in a rugged, yet light weight chassis. The VCC-1 is ideal to use as a volume control pedal that lets you to create synth-like volume swells at your feet. The VCC-1 is also perfect to use as a continuous controller of effect parameters in multi-effect units such as the DOD FX 7. Assigning the VCC-1 to the Wah parameter of the FX 7 will let you create “Voodoo-Like” wah effects.
MAKING CONNECTIONS
INPUT: Connect the instrument cable from any instrument being used to the input jack of the VCC-1.
OUTPUT: From the Output jack of the VCC- 1, run the instrument cable to either the amplifier or the parameter of the effect unit that is being controlled.
DOD ELECTRONICS CORPORATION 8760 SOUTH SANDY PARKWAY
SANDY, UTAH 84107
INTERNATIONAL DISTRIBUTION 3 OVERLOOK DRIVE UNIT 4
AMHERST, NEW HAMPSHIRE 03031
U.S.A.
FAX (603) 672-4246
DOD IS A REGISTERED TRADEMARK OF DOD ELECTRONICS
© 1997 DOD ELECTRONICS CORPORATION
PRINTED IN U.S.A. 4/97
MANUFACTURED IN THE U.S.A.
DOD 18-2168-A