Page 1
LS475W / LS475W+
User Manual
Page 2
1
Table of Contents
Table of Contents............................................................................................................... 1
Product Features ............................................................................................................... 2
Safety Precautions............................................................................................................. 5
Package Contents .............................................................................................................. 6
Optional Accessories ........................................................................................................ 7
Camera Controls ................................................................................................................ 8
Getting Started ................................................................................................................. 13
Installing Your Camera .................................................................................................... 16
Basic Camera Operation ................................................................................................. 18
Camera Modes ................................................................................................................. 19
Camera Settings .............................................................................................................. 21
System Settings ............................................................................................................... 25
Transferring Files ............................................................................................................ 28
Firmware Update .............................................................................................................. 29
LS475W Specifications .................................................................................................... 30
LS475W+ Specifications ................................................................................................. 30
Page 3
2
Product Features
New SONY STARVIS Sensor- ISO Sensitivity up to ISO
12800
Features a new SONY STARVIS CMOS sensor with improved sensitivity
not only under normal lighting but also in low light and near infrared light
condition.
Integrated 10 Hz GPS Processor
Integrated is the fastest 10 Hz GPS processor, that updates GPS data 10
times per second, recording your speed and location accurately. Date
and Time automatically synchronizes with the atomic clock.
Advanced WDR Technology - Stunning Videos in Any
Light
WDR technology, well-balanced exposure for any condition. It makes
night shots brighter and prevents overexposure to create the clearest
image.
Speed Camera Alert
Remind you of approaching fixed speed camera locations and mobile
speed camera “hot-spots” well in advance so you can slow down in time.
Stay away from traps and always stay in control.
*Currently supported: US, CA, UK, NO, PL, NL, BE, AU.
*Speed Camera Alert act as a reference and is for reference only, which
does not act as an active radar detector.
Please follow all traffic rules and
drive safely.
Parking Surveillance
Ensure your peace of mind by recording continually even when you have
parked and left your car. Record and lock a file if unusual shock or motion
is detected.
*DOD DP4 hardwiring kit required
Page 4
3
Support to 128GB Micro SDXC Memory Card
4X storage compatibility compared to predecessor models, supports up
to 128GB with more than 18 hours of recording.
DOD GPS Player
The DOD GPS Player generates 1080p video recordings with real-time
driving data such as speed and location clearly at a glance.
145º Wide Angle of View
Wide angle, wide view, without distortion. The brand-new-designed
optical lens captures images with ultra wide fields of view, covering up to
145 degrees, without pincushion or distortion.
f/1.6 Large Aperture Glass Lens - Super Low-Light
Performance
Equipped with f/1.6 large aperture, capturing better night shots than
conventional f/2.0, and records clearly sophisticated details such as the
license plate and others.
6G Sharp Glass Lens
6-Element sharp lens, made of 6 layers of glass, provides stunning clear
and non-deformed images.
G-Sensor Automatic Trigger for File Protection
When an impact or emergency brake occurs, the device will lock the
current video files automatically. Important files will not be overwritten by
loop recording.
Page 5
4
Loop Recording
When the storage space is full, it can automatically overwrite the
unprotected files.
Path Analysis
Calculate the distance, time and average speed of your journey from
location A to B. It´s a very economical and practical way to save your time
and fuel consumption.
Circular Polarizing Filter
Adjustable CPL filter suppress glare from windshield and manage
reflection. Provides clear images with enhanced contrasts.
Page 6
5
Safety Precautions
Product
Do not disassemble, repair, modify your camera or power related accessories. For
warranty service, please contact DOD Tech Support.
Do not adjust or operate camera while driving.
Avoid exposing your camera to extended periods of humidity and/or heat.
Prolonged exposure may reduce the product’s lifespan.
Do not spray water or cleaning agents directly onto the camera.
Fluids may cause fire, electric shocks, or malfunctions.
Avoid installing camera where it may obstruct the driver’s view or airbag deployment.
Car Power Adaptor
Use ONLY the DOD power adapter supplied with your unit.
Other power adapters may create a safety hazard or damage the unit.
Do not use damaged power adapters or cords. If damaged, please disconnect the power
adapter and contact DOD Tech Support for assistance.
Do not pull, insert, or bend the power cable using excessive force.
Do not operate or handle the power cable with wet hands.
In specified cars, the power may be constantly supplied to the device even the engine is
turned off. This may drain the vehicle battery. The optional DOD DP4 kit equipped with
low-voltage protection and is designed to prevent battery drain and reserve the minimum
voltage required for cranking.
Battery
Keep the device away from heaters or other hot objects.
Store the camera at lower temperatures to reduce the rate of self-discharge and
preserves the initial energy stored in the battery. The battery in the device self-discharges
naturally over time whether the battery is used or not.
Charge the dash camera for 5 minutes with the supplied DOD power cord if you are
unable to turn on the camera.
Page 7
6
Package Contents
Dash Cam
User Guide
Bracket
Car Power Adaptor
CPL
[LS475W+]
Note: Supplied accessories may vary by region.
Page 8
7
Optional Accessories
DP4
DP4 hardwiring kit offers constant
source and prevent battery drain
with low-voltage protection.
DA2S
DA2S Suction Savior provides a
long lasting adhesion to suction
cups.
Page 9
8
Camera Controls
●1 Mode【 】
When in stand by (not recording): Press to switch between recording and playback mode.
●2 Power Button ON/OFF【 】
Turns unit on/off
●3 Micro USB Port【 】
For use with the supplied DOD Car Power Adaptor or USB data cable.
LS475W
LS475W+
Page 10
9
Camera Controls
●5 Speaker
LS475W
LS475W+
Page 11
10
Camera Controls
●6 Micro SD Slot
Requires a micro SDHC/SDXC card, class 10 or above. Supports up to 128GB.
●7 HDMI Output Slot
Outputs live view or recorded files to external display.
*Recording function is disabled while HDMI output is connected.
●8 Reset Button
Use a small pin to press the button to force the device to reboot.
LS475W
LS475W+
Page 12
11
Camera Controls
●9 Arrow Keys【/】
Standby Mode: Used to navigate through menus and select videos for playback.
Recording Mode:
Press【】to capture snap shot of current recording.
Press【】to change notification/alert volume.
●10SOS Emergency File Lock【 】
While recording, press this button to lock the current recording file and protect it from
being over written.
A lock icon【 】will appear at the bottom left corner to indicate whether the current
recording is protected.
LS475W
LS475W+
Page 13
12
Camera Controls
●11 Menu / Return【 】
When not recording, press to access menus, or to exit sub menu.
Press 【 】once for recording options.
Press 【 】twice for system options.
* Recording must be stopped before accessing menus.
●12OK / REC【 / 】
Stop or start recording.
Act as the OK button in menu.
●13MIC / Display OFF【 / 】
During standby / recording mode:
Press 【 】to switch ON/OFF voice recording.
Press 【 】and hold to turn ON/OFF LCD display. Display status does not affect
continuous recording.
●14Operation Status LED
Steady blue - Unit is powered off and is charging.
Steady pink - Unit is powered on and charging but not recording.
Steady red - Unit is powered on but not charging nor recording.
Flashing red - Unit is recording and battery is full.
Flashing between blue and pink - Unit is recording and charging.
Flashing blue – Charging malfunction.
Page 14
13
Getting Started
Setting Up Your Camera
Set up your Dash Cam inside your vehicle to ensure easy access to power.
1. Start With SD Card.
To use with SD card, please format the microSD card in the camera menu to ensure correct
format before initial use. Memory card must be in FAT32 format to function properly.
Card slot is directional and may be damaged if SD card is inserted incorrectly.
To save recorded videos stably, DOD Tech recommends formatting your SD card every two
weeks from in the camera
Note: After formatting the SD card, all of your data will be deleted. Be sure
that you have backed up the important files.
Estimated Video Recording Length (1080p Full HD form)
Storage/Quality Recording length
16GB 110 minutes (1.8 hours)
32GB
200 minutes (3.2 hours)
64GB 380 minutes (6.3 hours)
128GB 780 minutes (12.8 hours)
*Video recording length may vary depending on environmental conditions.
LS475W LS475W+
Page 15
14
Getting Started
2. Connect the Power Adapter.
Plug the DOD power adapter into your vehicle’s power/accessory outlet.
Then carefully insert the micro USB plug into the USB port.
3. Turn on Your Vehicle.
Powering from your vehicle through the accessory socket will automatically turn on your
camera and starts recording, and your camera will stop recording and shuts off
automatically when power is turned off.
Note: In specified cars, the power may be constantly supplied to the device
even when the engine is turned off. This may drain the vehicle battery. The
optional DOD DP4 kit equipped with low-voltage protection and is designed
to prevent battery drainage.
LS475W
LS475W+
Page 16
15
Getting Started
4. Turn on/off Your Camera Manually.
Press【 】to turn on or turn off the unit manually.
*The Dash Cam will turn on and off automatically with the power supply from your vehicle.
5. Select Language➔ Set the Time Zone➔ Select the Speed Unit of Your
Choice
Upon powering up the camera for the first time or after upgrading the firmware on the
device, you will need to go through and input the Settings below.
Select Language
Select the language of your choice by pressing【/】.
Press【 / 】to proceed.
Set the time zone
Scroll down and select your respective time zone.
Press【 / 】to confirm.
Your camera will automatically sync with the time and date to the atomic clock base on the
chosen time zone.
Note: Daylight saving time requires adjustment manually.
Select the speed unit of your choice – KPH or MPH
Page 17
16
Installing Your Camera
Page 18
17
Installing Your Camera
1. Clean Windshield
Wipe down both the interior and exterior glass for the best image quality.
2. Attach the Mount to Your Camera
Attach the camera securely to the mount
Please insert MicroSD card to the unit.
3. Prepare the Camera for Installation
Peel off the protective mount cover.
Find a location which does not obstruct your view when driving.
It is recommended to place the camera behind the rearview mirror without blocking either
lenses or camera functions.
4. Adjust the Angle
The mount has an adjustable ball joint that can be loosened using
the plastic locking nut.
Angle your camera slightly below the horizon line to minimize glare.
Press the mount firmly against the glass and turn the mount nut
clockwise to secure the mount.
5. Install the Car Power Adaptor
If you have not done so previously, carefully insert the micro USB plug into the port on the
camera, and insert the power adapter into the cigarette lighter socket of your car.
The wiring can be hidden in the headliner, seams and rubber strips around the perimeter
of the windshield.
6. Remove the Lens Protector Film
Your camera is now installed and ready for daily use.
Note:
Always use the supplied DOD
car power adaptor to avoid the unexpected
damage.
If grease, fingerprints, or blots are found on the external/internal windshield
of the car, please wipe it clean or replace the windshield. Blots may affect
the recording quality or may cause the bracket to be unstable.
Due to various road condition in different countries, DO D Te ch
recommends setting the G-Sensor sensitivity accordingly to suit driving
environments in your country.
Page 19
18
Basic Camera Operation
Everyday Operation
Dash cam will automatically turn on and start recording when it starts receiving power. By
default, the camera will record over the oldest videos when the memory card is full (loop
recording). The protect files can take up to 30% of full SD card space, and not be over
written by normal recording files. When reaching 30% limit, files in RO (Read Only) folder
will be overwritten by newest protected file, starting with the oldest.
Continuously Powered Electrical Outlet
The camera will not automatically shut down when your vehicle is turned off If your vehicle
provides continuously power to the accessory outlet. To turn off your camera manually,
simply unplug the USB cable or press the power button can power button.
Continuously powered electrical outlet allows the camera to capture videos
while you are away but it will result in vehicle battery drainage
and may
eventually prevent your car from starting.
DOD Tech recommend to use
DP4 power kit for needs of parking surveillance.
Manually Turning On/Off Your Camera
Press【 】to turn on/off your camera.
Press【 】to begin/stop recording.
Video Directory:
Videos will be saved on the memory card and or in internal storage. Normal driving videos
are in the root directory and the protected files will be saved in the “RO” (Read Only) file.
File-naming for camera: 2017_0125_180946_001
Blue number sequence in example above indicates year/month/day,
Green number sequence indicates time in 24H format including seconds,
Page 20
19
Camera Modes
Standby Mode: Press【 】to switch in between Video Recording and Playback Mode.
Press 【 /OK】to stop recording before pressing 【 】to switch modes.
1.Recording Mode
Note: GPS icon flashes when it searches for GPS signal. HUD, Over-Speed Warning and
Speed Camera alerts only work when the GPS signals is stable.
●
Recording Status
Flashes when recording.
Exposure Value
Indicates the current exposure value setting.
MIC
Indicates if the audio recording is on or off.
Power Status
Indicates the power source and the battery status if external
power is not connected.
ISO Sensitivity
Indicates the current ISO value.
SOS File Lock
Indicates current recording file is locked and
protected. This
can be triggered by G-sensor or by pressing the SOS file
lock button,
Memory Card Status
Indicates if a memory card is inserted.
GPS Status
Flashes whilst the device is searching for satellites. Once the
positioning is done, the icon will be solidly displayed.
Date/Time
Current date and time.
Current Time
Record Audio (On/Off)
Recording Time
Exposure Value
Memory Card Status
ISO Sensitivity
File-Lock Indicator
Date
Power Status
GPS Status
Page 21
20
Camera Modes
2.Playback Mode
You can watch previously recorded videos in Playback Mode.
Press【 】to switch into the Playback Mode when unit is not recording.
Play the Video
Press【/】to choose file.
Press【 】to play or pause.
While playing video, press【/】to forwards/backwards.
Press【 】to exit the Playback Mode.
Delete or Protect Files from the SD card.
Press【/】to choose file.
Press【 】to enter Playback Menu.
Press【/】to select delete or protect current file.
Press【 】to confirm.
Press【 】to exit.
Note:
If protected, a lock icon will appear on the screen.
If deleted, it cannot be undone. Choose “delete all” will not erase protected files.
The “Format” function will erase all files including locked files.
Slideshow
Press the menu button and navigate to slideshow.
Photos and the first frame of each video will be shown in order.
Video File Name
Power Connected
Playback Mode
Play/Pause
File Location
Page 22
21
Camera Settings
Each mode has a unique set of settings. See the description below.
Two Camera Settings menus are accessible:
Functional Settings
System Settings
The menu settings can be switched by pressing【 】.
If you move the cursor before pressing【 】to access to system menu, exit and try again.
Note: Press【 】to stop recording before entering the camera menus.
Video Recording: Functional Settings Page
Accessed by pressing【 】once.
Resolution
Default with camera in 1080p Full HD at 60fps.
Loop Recording
Can be set to 1,3,5 or 10 minutes. Video recordings of the selected length will be recorded
onto the memory card. When the memory card is full, the oldest files will be overwritten,
excluding locked clips. Turning off loop recording will result in 30min per video and will
prevent the camera from writing new files when the memory card is filled.
Exposure Value
Sets the brightness /darkness of the video.
Video too bright? Set between -1 to -3.
Video too dark? +1 to +3.
Recommended setting: 0
Record Audio
Switches the microphone recording on/off.
Options can be changed during recording by pressing button【 】.
Date Stamp
Imprints the time and date in the recorded video.
Page 23
22
Camera Settings
G-Sensor
Measures G-forces. The sensitivity settings can be set off/low/mid/high, If excessive force
is detected, the current recording video will be locked and the file will be saved in the “RO”
directory. However, Setting G-Sensor to OFF may result in faulty function in Parking
Surveillance Mode.
Recommended setting: low. Inappropriate setting per environment or road condition will
result in frequently file lock.
Image Rotation
Rotates the recorded image 180º when Dash Cam is mounted upside down.
Parking Surveillance (Default: Off)
When function is enabled, the Dash Cam will automatically switch to Parking Surveillance
Mode if vehicle is stationary for over 10 minutes.
1. Automatically records videos when motion is detected within view range of camera.
2. Automatically records and locks recording videos when excessive force of impact is
detected by G-sensor.
3. Camera only records when motion or impact is detected.
4. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or
longer.
Note:
Parking Surveillance requires consistent power supply via vehicle battery.
(It is recommended to use optional DOD DP4 kit equipped with low-voltage
protection design to prevent battery drainage.
Please ensure to enable G-sensor function in setting menu before switch to
Parking Surveillance. (G-sensor sensitivity Default: Medium)
Parking Surveillance will automatically shut down GPS locating, and will
resume when switched to normal recording mode.
Enabling Parking Surveillance will automatically shut down Time-Lapse
function if previously turned on.
Back lighting will automatically dim when entering Parking Surveillance,
and will resume when exit.
Page 24
23
Camera Settings
ISO Stamp
Imprints ISO value (light sensitivity value) on the video file.
On/Off
Default: On.
Set Time Zone
Sets the current time zone for GPS time and date auto calibration. Note the time zone must
be manually adjusted for daylight savings
Speed Units
Select metric or imperial units.
Path Analysis
Calculates the total distance, travel time, and average speed of your journey from the
beginning of your trip to the end (when camera is turned on to when turned off). If Path
Analysis is set to “on”, the results will be displayed on the screen when the unit is turned off.
Normal recording will resume If power is reconnected during display.
Default: Off.
Driver Fatigue Warning
Sets a timed delay before showing a visible alert reminding the driver to take a break.
Default: Off.
GPS Logging
On/Off.
Default: On
Head Up Display
Screen will show current speed and direction. If enabled, the set speed warning will also
appear on display.
Default: Off.
Speed Warning
Shows a visual warning on the head-up display when the set speed has been exceeded.
Default: Off.
Page 25
24
Camera Settings
Speed Stamp
Imprinting speed in video footages. This can be turned on/off.
Time-Lapse
The time-lapse function is used to create a sped-up video. When set, the camera will record
one frame every 200ms (milliseconds)/500ms/1 second/5 seconds.
Default: Off.
Note: Time-Lapse cannot work with Parking Surveillance, this function will
automatically turn off when Parking Surveillance is enabled.
Plate Stamp
Imprints a customized set of 8 digits to the recorded video. Add license plates, driver name
or other identifying words to watermark your video.
Password Settings
Set a password lock which will prevent files from being deleted or prevent the menu from
being accessed.
Note: This does not prevent other users from extracting the memory card or changing the
files via computer.
Traffic Camera Warning
Warning sound and on-screen icon to remind you of approaching traffic camera such as
fixed speed camera, red-light camera or hot-spots for mobile police camera. Traffic camera
warning will not be activated below 20km/h or 12mph. Speed camera icon will not appear in
Heads Up Display mode.
Note: Currently supported: US, CA, UK, NO, PL, NL, BE, AU.
**Please make sure "Volume" is turned on in setting menu
*Traffic
Camera Alert act as a reference and is for reference only, which does not act as an
active radar detector. Please follow all traffic rules and drive safely.
Page 26
25
System Settings
Accessed by pressing【 】twice while standby.
Date/Time
When GPS signal is not available, manually sets year/date/time as well as display format.
Volume
Turns on/off all sounds, including button and notification.
Language
Screen Saver
Set 3/5/10min before display turns off to reduce driver distraction. Dash Cam still records
when screen saver is activated. Screen saver does not activate in Parking Surveillance
mode.
Display Brightness
Adjust screen back lighting.
Flicker Reduction
Adjusts the camera's frequency setting to minimize flickering and banding in the recorded
video. Flick reduction: 50Hz/60Hz is related to the light frequency in your location. Normally
the frequency is correlated to local voltage rating, if you find the video recorded at night is
glimmering, please adjust light frequency per your location.
Format Memory Card
Completely deletes all files including locked footage from the SD card and optimizes the
card for recording. DOD Tech suggest formatting via the menu every two weeks to ensure
proper SD card functionality.
Factory Reset
Reverts all settings back to the original factory default.
Firmware Version
Shows the model name and current firmware version.
Page 27
26
Play on DOD Player
Please transfer the video files to your electronic device for smooth viewing and or storage.
The DOD Video Player is a user-friendly program to playback videos and to visualize your
position and speed on your PC or Mac.
Installing the DOD Video Player
Download the software from DOD Tech’s website and follow instructions for installation.
Suggested System Requirements:
Windows XP or higher (i3 or better, with at least 2GB Ram)
Mac OSX 10.6.4 or higher
Launching the DOD Video Player
Once launched, the player will appear on your screen.
Click the Player icon below to view instruction video
goo.gl/IUM9qd
Please ensure internet access before viewing instruction video
Learn more about DOD GPS PLAYER V2.0
Video Display
Preview
Add/Remove
or Export
Direction of Travel
G-Force Valu e
Speed
Page 28
27
Play on DOD Player
Open Video Files
Add your file to the list of videos:
Click “File”, click “Open”, and navigate to the location of your files.
Press the “ADD” button located below the list of videos.
Video Player Features
Once the video is playing, your position, speed and G-Force will be displayed at the
bottom of the player window.
Pressing the “Location Map” button will show your position on Google Maps.
Page 29
28
Transferring Files
Video files can be transferred to your electronic device for viewing and storage.
USB Cable
1. Connect a USB cable from the camera’s USB port to computer.
2. Camera will automatically turn on and should show “Mass Storage” on display.
3. Computer should now detect the camera as a flash drive in directory.
Card Reader/MicroSD Slot
Use a Micro SD card adaptor (purchase separately) or a compatible electronic device with
a MicroSD slot (ex: tablet). Follow the manufacturer’s instructions.
Video Output
HDMI (TV)
Connecting a mini-HDMI to HDMI from your camera to a compatible television/monitor will
automatically output the camera’s screen. Recording functions are disabled while
streaming video.
Page 30
29
Firmware Update
See the support section on DOD Tec h ’s website for any available firmware updates and
instructions.
About SD Card
Test the Micro SD memory card regularly as the memory card is a consumable item, and
needs to be replaced periodically.
Reformat the memory card in the camera menu every two weeks to extend usable lifetime.
This should only be done AFTER desired files have been saved elsewhere, such as
portable hard drive. Formatting the memory card will clear all files, including RO files.
DOD is NOT responsible for any malfunctions caused from the use of disingenuous,
modified, or unauthorized parts and accessories.
DOD does NOT guarantee the recording of accidents which may produce excessive force
of impact causing the device to malfunction and fault.
The working temperature of this product is -20°C~65°C(-4°F~149°F). Please ensure the
device is stored within the temperature range; or the device may be damaged and or
malfunction, which these circumstances are not covered by warranty.
DOD is NOT responsible for the loss of any recorded video during operation due to
unexpected factors or force majeure when driving.
The video recordings filmed by this Dash Cam are intended for personal use ONLY.
Suggested to use Class 10 and MLC flash memory cards.
DOD Tech recommend NOT to use Sandisk branded or TLC flash memory cards.
Note:
Please ensure stable power during firmware update, otherwise may result
in update failure or malfunction.
When update completes, system will show option
to format SD card.
Please ensure to format SD card by computer / dashcam to prevent update
repeatedly.
Note:
64GB or greater capacity cards will show “SD Card Error” when first insert into
dash cam. Please use formatting function in system menu to format SD card
prior to usage to ensure proper functionalities.
When formatting via computer, 64GB or greater requires formation program to
transform original exFAT format to FAT32 to properly function in dash cam
.
Page 31
30
LS475W Specifications
Video Resolution
1920x1080@60fps
Sensor
SONY STARVIS CMOS sensor
Wide-Angle Lens
145°
Aperture
f/1.6
ISO Sensitivity
up to ISO 12800
Display
2.7" 16:9 TFT LCD
Video Format
H.264 MOV
Recording Media
micro SDHC/SDXC Card (Up to 128GB)
Audio
Mic and Speaker(Mono)Equipped
Battery
3.7V 180mAh Lithium Battery
Power Input
5V 1.5A
Size
112.6 (L) x 61.5(W) x 33.4 (H)mm
Weight
110g
Operating Temperature
-20°C ~65°C
LS475W+ Specifications
Video Resolution
1920x1080@60fps
Sensor
SONY STARVIS CMOS sensor
Wide-Angle Lens
145°
Aperture
f/1.6
ISO Sensitivity
up to ISO 12800
Display
3" 16:9 TFT LCD
Video Format
H.264 MOV
Recording Media
micro SDHC/SDXC Card (Up to 128GB)
Audio
Mic and Speaker(Mono)Equipped
Battery
3.7V 900mAh Lithium Battery
Power Input
5V 1.5A
Size
112 (L) x 71.9(W) x 36.4 (H)mm
Weight
145g
Operating Temperature
-20°C ~65°C
All Specifications Are Subject to Change without Notice.
Page 32
31
Copyright ©2017 DOD Tech
All Rights Reserved
Under the copyright laws, this manual may not be copied,
in any way, shape, or form, without the written consent of DOD Tech.
Loading...