Sawing
Solutions
DCDS-750NC StructurALL®
19 x 30" Dual Column, Dual Swivel Saw
Our Products are a Cut Above the Rest!
DoALL® Sawing was founded in 1927 by Leighton A. Wilkie, who invented
and manufactured the rst metal cung band saw in 1933. We connue to
be a global leader for ALL your sawing needs! DoALL provides manual,
semi-automac and automac metalworking band saws. Even though
we specialize in metal cung band saws, our legacy connues to parts
Solutions for ALL Your Sawing Needs
5505 West 123rd Street, Savage, MN 55378 | www.DoALLsaws.com | 888.362.5572
and service as well. DoALL Sawing Products oers a complete line of
service, replacement and repair parts for our current line of band sawing
machines. Our skilled team of service professionals – spread across
United States and around the globe – are trained in service and repair of
the enre line of DoALL band saws as well as compeve machines.
Horizontal Structural Saws
Dual Column, Dual Swivel Miter StructurALL® Series
DoALL dual column, dual swivel
are ideal for producon sawing
of a large variety of materials
including, but not limited to,
structural solids, stainless and
tool steel. Double column, double
miter saws are ideal machines for
a fabricator cung mulple angles
in the same work piece.
DCDS-600NCDCDS-600SA
DoALL Model Number DCDS-600SA DCDS-600NC DCDS-750SA DCDS-750NC
Rectangle Capacity at 90° 17 x 24" (440 x 610mm) 17 x 24" (440 x 610mm) 19 x 30" (480 x 750mm) 19 x 30" (480 x 750mm)
Round Capacity at 90° 18.5" (470mm) 18.5" (470mm) 20" (500mm) 20" (500mm)
Rectangle Capacity at 45° 16.3 x 19.5" (415 x 495mm) 16.3 x 19.5" (415 x 495mm) 18.9 x 19.7" (480 x 500mm) 18.9 x 19.7" (480 x 500mm)
Round Capacity at 45° 18.5" (470mm) 18.5" (470mm) 19.7" (500mm) 19.7" (500mm)
Rectangle Capacity at 60° 12 x 16.7" (305 x 425mm) 12 x 16.7" (305 x 425mm) 13 x 18.9" (330 x 480mm) 13 x 18.9" (330 x 480mm)
Round Capacity at 60° 13" (330mm) 13" (330mm) 13" (330mm) 13" (330mm)
Blade Drive Motor 5 hp (4kW) 5 hp (4kW) 5 hp (4kW) 7.5 hp (5.5kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Blade Size (LxWxGage)
Auto Index Stroke Length N/A 0.12-78.7" (3-2000mm) N/A 0.12-78.7" (3-2000mm)
Max Nesng Capacity at 90° 10 x 24" (255 x 610mm) 10 x 24" (255 x 610mm) 10.2 x 29.5" (260 x 750mm) 10.2 x 29.5" (260 x 750mm)
Floor Space Required (LxWxH) 115 x 70 x 84" (2900 x 1760 x 2135mm) 126 x 192 x 94"(3200 x 4880 x 2390mm) 130 x 67 x 85" (3300 x 1700 x 2150mm) 130 x 232 x 85" (3300 x 4880 x 2150mm)
Weight 3715 lbs (1685kg) 8455 lbs (3835kg) 4409 lbs (2000kg) 9149 lbs (4150kg)
238-1/2 x 1-1/4 x 0.042"
(6060 x 34 x 1.1mm)
237 x 1-1/4 x 0.042"
(6020 x 34 x 1.1mm)
256 x 1-1/2 x 0.05"
(6500 x 41 x 1.3mm)
256 x 1-1/2 x 0.05"
(6500 x 41 x 1.3mm)
2
www.DoALLsaws.com | 888.362.5572
Horizontal Structural Saws
General Purpose Miter StructurALL Series
DoALL oers a variety of low
cost, custom producon metal
cung band saws. Custom
producon saws are ideal for
small shops and maintenance
facilies that have occasional
needs to cut metal material.
DS-320MDS-280M
DoALL Model Number DS-280M DS-320M S-320CNC S-500CNC - COMING SOON 500-SNC
Rectangle Capacity at 90° 8 x 11" (210 x 280mm) 11.75 x 12.5" (300 x 320mm) 11.75 x 12.5" (300 x 320mm) 14 x 20" (350 x 500mm) 14 x 20" (356 x 510mm)
Round Capacity at 90° 9" (230mm) 11.75" (300mm) 11.75" (300mm) 14" (360mm) 14.75" (375mm)
Rectangle Capacity at 45° 6.7 x 7" (170 x 180mm) 9.75 x 11.75" (250 x 300mm) 9.75 x 11.75" (250 x 300mm) 7 x 14" (180 x 360mm) 14 x 13" (356 x 330mm)
Round Capacity at 45° 7.5" (190mm) 11.75" (300mm) 11.75" (300mm) 14" (360mm) 13" (330mm)
Rectangle Capacity at 60° 4 x 4.75" (70 x 100mm) 7.75 x 7.75" (200 x 200mm) 7.75 x 7.75" (200 x 200mm) 8.6 x 12" (220 x 440mm) 14 x 8" (356 x 203mm)
Round Capacity at 60° 4.75" (100mm) 7.75" (200mm) 7.75" (200mm) 11.8" (300mm) 10" (254mm)
Blade Drive Motor 2-speed 1/1.5 hp (0.7/1.1 kW) 2-speed 2/2.5 hp (1.4/1.8 kW) 4 hp (3kW) 4 hp (3kW) 5 hp (3.75kW)
Blade Speeds 115/230 fpm (35/70mpm) 115/230 fpm (35/70mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 50-400 fpm (15-120mpm)
Blade Size (LxWxGage)
Auto Index Stroke Length N/A N /A 0.12-19.7" (3-500mm) 0.12-19.7" (3-500mm) 14-40" (356-1016mm)
Max Nesng Capacity at 90° 4.7 x 11" (120 x 280mm) 6.25 x 12.5" (160 x 320mm) 4.75 x 9" (120 x 230mm) Info coming soon 14 x 20" (356 x 510mm)
Floor Space Required LxWxH)
Weight 618 lbs (280kg) 1764 lbs (800kg) 1764 lbs (800kg) 3307 lbs (1500kg) 3000 lbs (1361kg)
107 x 1 x 0.035"
(2720 x 27 x 0.9mm)
65 x 35 x 74"
(1650 x 885 x 1860mm)
144 x 1 x 0.035"
(3660 x 27 x 0.9mm)
90 x 46 x 56"
(2280 x 1170 x 1410mm)
144 x 1 x 0.035"
(3660 x 27 x 0.9mm)
91 x 90 x 60"
(2309 x 2276 x 1503mm)
187 x 1-1/4 x 0.042"
(4750 x 34 x 1.1mm)
100 x 100 x 56"
(2550 x 2550 x 1420mm)
S-320CNC
197 x 1.25 x .042"
(5003 x 32 x 1.1mm)
96 x 102 x 90"
(2348 x 2591 x 2286mm)
Horizontal StructurALL Series
DoALL miter and non-miter
saws increase exibility and
improve eciency in fabricaon
shops or other sawing
applicaons that require the
cung of miters. DoALL oers a
full range of saws that feature a
variety of cung capacies and
angle cung opons.
400-S
DoALL Model Number DS-320SA 400-S DS-500SA DS-600SA
Rectangle Capacity at 90° 11.75 x 12.5" (300 x 320mm) 10 x 16" (254 x 406mm) 14 x 20" (360 x 500mm) 18" x 23-1/2" (460 x 600mm)
Round Capacity at 90° 11.75" (300mm) 10.75" (273mm) 14" (360mm) 18" (460mm)
Rectangle Capacity at 45° 9.75 x 11.75" (250 x 300mm) 9 x 10.75" (229 x 273mm) 7.5 x 15.75" (190 x 400mm) 9.5 x 18.5" (240 x 470mm)
Round Capacity at 45° 11.75" (300mm) 10.75" (273mm) 14.2" (360mm) 18" (460mm)
Rectangle Capacity at 60° 7.75 x 7.75" (200 x 200mm) N/A 10.6 x 12.6" (270 x 320mm) 9.5 x 12.5" (240 x 320mm)
Round Capacity at 60° 7.75" (200mm) N/A 12.2" (310mm) 12.5" (320mm)
Blade Drive Motor 2 - 2.5 hp (1.4-1.8 kW) 2 hp (1.5kW) 5 hp (4kW) 5 hp (4kW)
Blade Speeds 10-240 fpm (35-70mpm) 105-275 fpm (32-82mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Blade Size (LxWxGage) 144 x 1 x 0.035" (3660 x 27 x 0.9mm) 158 x 1 x 0.035" (4013 x 25.4 x 0.89mm) 188 x 1-1/4 x 0.042"(4780 x 34 x 1.1mm) 1.5 x 212" (41 x 5380mm)
Max Nesng Capacity at 90° 6.25 x 12.5" (160 x 320mm) N/A 8.7 x 19.7" (220 x 500mm) 9.8 x 23.6" (250 x 600mm)
Floor Space Required LxWxH) 90 x 46 x 56" (2280 x 1170 x 1410mm) 87 x 42 x 55" (2210 x 1067 x 1397mm) 114 x 43 x 56" (2873 x 1080 x 1420mm) 136 x 45 x 65" (3457 x 1140 x 1650mm)
Weight 1533 lbs (695kg) 1200 lbs (544kg) 1576 lbs (715kg) 2646 lbs (1200kg)
www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
DS-600SA
3
Dual Column Hercules™ Saws
Dual Column CNC Enclosed Saws
The Hercules™ series of high
producon, horizontal Computer
Numerically Controlled (CNC) band
saws from DoALL are highly ecient,
automac, hydraulically controlled
machines with mulple material feeds.
Designed for vercal cuts, they are
ideal for serial producon in industrial
sengs. The "box" or enclosed design
provides very safe operaon.
DC-400CNC
DoALL Model Number DC-300CNC DC-400CNC DC-510CNC DC-750CNC DC-1000CNC DC-1400CNC
Rectangle Capacity at 90°
Round Capacity at 90° 12" (300mm) 16" (400mm) 20" (510mm) 28" (700mm) 33.5" (850mm) 47.25" (1200mm)
Blade Drive Motor 5 hp (4kW) 7.5 hp (5.6kW) 10 hp (7.5kW) 15 hp (11.1kW) 15 hp (11.1kW) 15 hp (11.1kW)
Blade Speeds
Blade Size (LxWxGage)
Auto Index Stroke Length 0.2-19.9" (5-505mm) 0.12-21.7" (3-550mm) 0.12-26.4" (3-670mm) 0.12-27.5" (3-700mm) 0.12-39.4" (3-1000mm) 0.4-39.4" (10-1000mm)
Max Nesng Capacity at 90°
Floor Space Required (LxWxH)
Weight 3131 lbs (1420kg) 7850 lbs (3560kg) 13713 lbs (6220kg) 27558 lbs (12500kg) 30204 lbs (13700kg) 55116 lbs (25000kg)
12 x 12"
(300 x 300mm)
65-328 fpm
(20-100mpm)
178 x 1-1/4 x 0.042"
(4520 x 34 x 1.1mm)
8.7 x 11.8"
(220 x 300mm)
103 x 67 x 85"
(2600 x 1690 x 2140mm)
16 x 16"
(400 x 400mm)
65-328 fpm
(20-100mpm)
220 x 1-1/2 x 0.05"
(5580 x 41 x 1.3mm)
9.8 x 15.8"
(250 x 400mm)
117 x 82 x 87"
(2970 x 2080 x 2200mm)
20 x 20"
(510 x 510mm)
50-262 fpm
(15-80mpm)
238-1/2 x 2 x 0.063"
(6060 x 54 x 1.6mm)
17.7 x 19.6"
(450 x 500mm)
150 x 95 x 87"
(3800 x 2400 x 2200mm)
DC-510CNC
28 x 30"
(700 x 750mm)
50-262 fpm
(15-80mpm)
303 x 2-5/8 x 0.063"
(7680 x 67 x 1.6mm)
17.7 x 29.5"
(450 x 750mm)
229 x 109 x 95"
(5800 x 2750 x 2400mm)
DC-1000CNC
33.5 x 40"
(850 x 1000mm)
50-262 fpm
(15-80mpm)
374 x 2-5/8 x 0.063"
(9490 x 67 x 1.6mm)
24 x 39.37"
(610 x 1000mm)
237 x 152 x 111"
(6000 x 3850 x 2820mm)
47.25 x 55"
(1200 x 1400mm)
50-262 fpm
(15-80mpm)
458 x 3-3/20 x 0.063"
(11650 x 80 x 1.6mm)
31.5 x 47.24 "
(800 x 1200mm)
205 x 93 x 113"
(5200 x 2700 x 2850mm)
Hercules II Saws
Dual Column CNC Ball Screw Saws
DoALL high production, horizontal
CNC enclosed band saws are highly
efficient, automatic, hydraulically
controlled saws. They operate with
a ball screw servo motor using
"SMART" controls to cut a wide
range of full and profile materials
including stainless and tool steel.
DC-620CNC
DoALL Model Number DC-620CNC - NEW
Rectangle Capacity at 90° 21.5 x 24" (550 x 620mm)
Round Capacity at 90° 22" (550mm)
Blade Drive Motor 20 hp (15kW)
Blade Speeds 50-500 fpm (15-150mpm)
Blade Size (LxWxGage)
Auto Index Stroke Length 0.12-394" (3-9999mm)
Max Nesng Capacity at 90° 13.75 x 22" (350x550mm)
Floor Space Required (LxWxH)
Weight 17052 lbs (7735kg)
Saw type CNC Ball Screw
4
302-1/4 x 2 x 0.063"
(7680 x 54 x 1.6mm)
157 x 91 x 115"
(3980 x 2300 x 2900mm)
www.DoALLsaws.com | 888.362.5572
Typical Hercules enclosed cung zone
Table and Portal Hercules Saws
Dual Column Table and Portal Saws
DoALL also offers large
format, dual column table
and portal saws. These
large capacity Hercules
saws are ideal for cutting
extremely heavy or large
material. The large capacity
saws cut in two directions.
DC-850CNC
DoALL Model Number DC-850CNC DC-1200CNC DC-1600CNC
Rectangle Capacity at 90° 33.5 x 40" (850 x 1000mm) 47.25 x 63" (1200 x 1600mm) 49.25 x 63" (1250 x 16000mm)
Round Capacity at 90° 33.5" (850mm) 47.25" (1200mm) 49.25" (1250mm)
Blade Drive Motor 15 hp (11.1kW) 15 hp (11.1kW) 16.75 hp (12.5kW)
Blade Speeds 50-262 fpm (15-80mpm) 50-262 fpm (15-80mpm) 50-262 fpm (15-80mpm)
Blade Size (LxWxGage) 357.5 x 2-5/8 x 0.063" (9080 x 67 x 1.6mm) 458 x 3.15 x 0.063" (11650 x 80 x 1.6 mm) 458 x 3.15 x 0.063" (11650 x 80 x 1.6 mm)
Auto Index Stroke Length Info Coming Soon Info Coming Soon Info Coming Soon
Max Nesng Capacity at 90° Info Coming Soon Info Coming Soon Info Coming Soon
Floor Space Required (LxWxH) 164 x 205 x 124" (4150 x 5200 x 3150mm) 205 x 158 x 300" (5200 x 4000 x 7653mm) 205 x 138 x 162" (5200 x 3500 x 4100mm)
Weight 32122 lbs (14570kg) 66910 lbs (30350kg) 88185 lbs (40000kg)
Saw type Bidireconal Billet Bidireconal Billet Bidireconal Billet
DC-1200CNC DC-1600CNC Portal
Dual Column Olympia™ Tube Saws
Dual Column Tube-Cutting Saws
DoALL specialty tube saws are ideal
for cung a variety of diameter
tube and pipe. Also classied as cut
o saws, these DoALL dual column,
metal cung band saws provide full
automaon for intricate and precise
cuts, saving both me and money.
TDC-400SA TDC-400NC
DoALL Model Number TDC-400SA TDC-400CNC TDC-600SA TDC-600CNC TDC-1000SA TDC-1000CNC
Rectangle Capacity at 90° 16 x 16" (400 x 400mm) 16 x 16" (400 x 400mm) 20 x 24" (510 x 610mm) 20 x 24" (510 x 610mm) 38 x 40" (960 x 1000mm) 38 x 40" (960 x 1000mm)
Round Capacity at 90° 16" (400mm) 16" (400mm) 24" (610mm) 24" (610mm) 40" (1000mm) 40" (1000mm)
Blade Drive Motor 4 hp (3kW) 4 hp (3kW) 5 hp (4kW) 5 hp (4kW) 10 hp (7.5kW) 10 hp (7.5kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Blade Size (LxWxGage)
Auto Index Stroke Length
Max Nesng Capacity at 90° 13.4 x 15.8" (340 x 400mm) 13.4 x 15.8" (340 x 400mm) 16.3 x 23.6" (415 x 600mm) 16.3 x 23. 6" (415 x 600mm) 25.6 x 39.4" (650 x 1000mm) 25.6 x 39.4" (650 x 1000mm)
Floor Space Required
(LxWxH)
Weight 2072 lbs (940kg) 2866 lbs (1300kg) 5688 lbs (2580kg) 8003 lbs (3630kg) 20944 lbs (9500kg) 20944 lbs (9500kg)
178 x 1-1/4 x 0.042"
(4520 x 34 x 1.1mm)
N/A 0.12-19.9" (3-505mm) N/A 0.12-78" (3-1981mm)
63 x 41 x 81"
(1600 x 1030 x 2050mm)
178 x 1-1/4 x 0.042"
(4520 x 34 x 1.1mm)
102 x 102 x 72"
(2600 x 2600 x 1815mm)
245-1/4 x 1-1/2 x 0.05"
(6230 x 41 x 1.3mm)
119 x 54 x 91"
(3000 x 1350 x 2300mm)
245-1/4 x 1-1/2 x 0.05"
(6230 x 41 x 1.3mm)
or 0.12-236" (3-5994mm)
119 x 158 x 91"
(3020 x 1000 x 2300mm)
www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
TDC-600CNC
351 x 2 x 0.063"
(8920 x 54 x 1.6mm)
N/A 0.12-78" (3-1981mm)
169 x 284 x 117"
(5050 x 7200 x 2960mm)
351 x 2 x 0.063"
(8920 x 54 x 1.6mm)
or 0.12-236" (3-5994mm)
169 x 284 x 117"
(5050 x 7200 x 2960mm)
5
Production Column Saws
Automatic Continental Series
™
Standard features that far
exceed the industry standard!
The Connental Series™ of
producon, metal cung band
saws by DoALL provide cung
edge performance at a leading
edge price.
DC-330NC DC-420NC DC-700NC
DoALL Model Number DC-280NC DC-330NC DC-420NC DC-460NC DC-560NC DC-700NC DC-800NC
Rectangle Capacity at 90°
Round Capacity at 90° 11" (280mm) 13" (330mm) 16.5" (420mm) 18" (460mm) 22" (560mm) 27" (700mm) 31.5" (800mm)
Blade Drive Motor 5 hp (3.75kW) 5 hp (3.75kW) 10 hp (7.5kW) 10 hp (7.5kW) 10 hp (7.5kW) 15 hp (11.1kW) 15 hp (11.1kW)
Blade Speeds
Blade Size (LxWxGage)
Auto Index Stroke Length 15.75" (400mm) 19.68" (500mm) 19.68" (500mm) 19.68" (500mm) 15.75" (400mm) 15.75" (400mm) 15.75" (400mm)
Max Nesng Capacity
at 90°
Floor Space Required
(LxWxH)
Weight 3858 lbs (1750kg) 4410 lbs (2000kg) 5512 lbs (2500kg) 6284 lbs (2850kg) 9923 lbs (4500kg) 15650 lbs (7100kg) 25350 lbs (11500kg)
11 x 11.75"
(280 x 300mm)
52-275 fpm *
(16-85mpm)
151 x 1-1/4 x 0.042"
(3820 x 34 x 1.1mm)
9.875 x 5.75"
(250 x 145mm)
83 x 79 x 51"
(2100 x 1990 x 1300mm)
13 x 15.75"
(330 x 400mm)
52-275 fpm *
(16-85mpm)
167 x 1-1/4 x 0.042"
(4242 x 34 x 1.1mm)
13 x 6.75"
(330 x 170mm)
89 X 87 x 56"
(2250 x 2195 x 1400mm)
16.5 x 16.5"
(420 x 420mm)
52-275 fpm *
(16-85mpm)
192 x 1-1/2 x 0.05"
(4880 x 41 x 1.3mm)
13 x 8.625"
(330 x 220mm)
97 x 88 x 66"
(2450 x 2235 x 1665mm)
18 x 20"
(460 x 510mm)
52-275 fpm *
(16-85mpm)
209 x 1-1/2 x 0.05"
(5300 x 41 x 1.3mm)
17.75 x 10"
(450 x 255mm)
102 x 89 x 71"
(2580 x 2240 x 1800mm)
22 x 24"
(560 x 610mm)
52-275 fpm *
(16-85mpm)
260 x 2 x 0.063"
(6604 x 54 x 1.6mm)
19.875 x 8.875"
(505 x 225mm)
127 x 84 x 85"
(3210 x 2135 x 2160mm)
27 x 31"
(700 x 800mm)
52-275 fpm *
(16-85mpm)
325 x 2-5/8 x 0.063"
(8250 x 67 x 1.6mm)
25.625 x 13"
(650 x 330mm)
154 x 89 x 90"
(3910 x 2240 x 2300mm)
31.5 x 39.5"
(800 x 1000mm)
52-275 fpm *
(16-85mpm)
347 x 2-5/8 x 0.063"
(8800 x 67 x 1.6mm)
25.625 x 14.625"
(650 x 370mm)
172 x 94 x 108"
(4350 x 2390 x 2750mm)
*Two-step pulley system can increase speeds to 400 fpm (120mpm)
Semi-Automatic Continental Series
For operaons that do not require indexing, DoALL oers
a full line of Connental Series semi-automac saws
that are designed for cung a wide range of metals on a
producon basis.
DC-500SA DC-800SA
DoALL Model Number DC-280SA DC-330SA DC-500SA
Rectangle Capacity at 90°
Round Capacity at 90° 11" (280mm) 13" (330mm) 20" (500mm) 22" (560mm) 31.5" (800mm) 43.5" (1100mm) 51.25" (1300mm)
Blade Drive Motor 5 hp (3.7kW) 5 hp (3.7kW) 10 hp (7.5kW) 10 hp (7.5kW) 15 hp (11.2kW) 15 hp (11.2k@) 20 hp (15kW)
Blade Speeds
Blade Size (LxWxGage)
Max Nesng Capacity
at 90°
Floor Space Required
(LxWxH)
Weight 2646 lbs (1200 kg) 3638 lbs (1650 kg) 5732 lbs (2600 kg) 8378 lbs (3800 kg) 24251 lbs (11000 kg) 30865 lbs (14000 kg) 46297 lbs (21000 kg)
11 x 11.75"
(280 x 300mm)
66-262 fpm*
(20-80mpm )
151 x 1-1/4 x 0.042"
(3820 x 34 x 1.1mm)
9.75 x 4"
(250 x 100mm)
83 x 48 x 60"
(2110 x 1210 x 1520mm)
13 x 15.75"
(330 x 400mm)
66-262 fpm*
(20-80mpm)
167 x 1-1/4 x 0.042"
(4242 x 34 x 1.1mm)
14.5 x 6-5/8"
(370 x 170mm)
88 x 48 x 61"
(2240 x 1210 x 1550mm)
20 x 22"
(500 x 560mm)
66-262 fpm*
(20-80mpm)
215 x 1-1/2 x 0.05"
(5450 x 41 x 1.3mm)
18.9 x 9.4"
(480 x 240 mm)
114 x 61 x 71"
(2890 x 1550 x 1800mm)
DC-560SA (Extended
Capacity)
22 x 31.5"
(560 x 800mm)
52-275 fpm*
(16-85mpm)
268 x 2 x 0.063"
(6800 x 54 x 1.6mm)
18.9 x 11"
(480 x 280 mm)
130 x 77 x 79"
(3300 x 1950 x 2000mm)
DC-1700SA
DC-800SA DC-1100SA DC-1700SA
31.5 x 39.5"
(800 x 1000mm)
52-275 fpm*
(16-85mpm)
347 x 2-5/8 x 0.063"
(8800 x 67 x 1.6mm)
N/A N/A N/A
171 x 85 x 104"
(4350 x 2160 x 2650mm)
43.5 x 43.5"
(1100 x 1100mm)
49-262 fpm
(15-80mpm)
394 x 2-5/8 x 0.063"
(10000 x 67 x 1.6mm)
95 x 181 x 128"
(2400 x 4600 x 3250mm)
51.25 x 67"
(1300 x 1700mm)
39-246 fpm
(12-75mpm)
512 x 3-3/20 x 0.063"
(13000 x 80 x 1.6mm)
110 x 244 x 150"
(2800 x 6200 x 3800mm)
*Two-step pulley system can increase speeds to 400 fpm (120mpm)
6
www.DoALLsaws.com | 888.362.5572
Circular Cut-Off/Cold Saws
Circular Series
When cung small diameters, short
lengths and thousands of parts,
circular cut-o saws are perfect
addions to any shop. Circular cuto saws from DoALL can provide full
automaon for intricate and precise
cuts, saving both me and money.
SC-75A SC-100A SC-150A
DoALL Model Number SC-75A SC-100A SC-150A
Rectangle Capacity at 90° 0.3-2.36 x 0.3-2.36" (8-60 x 8-60mm) 0.39-3.15 x 0.39-3.15" (10-80 x 10-80 mm) 2.6-4 x 2.6-4" (65-105 x 65-105mm)
Round Capacity at 90° Up to 3" (75mm) Up to 4" (100mm) Up to 6" (150mm)
Blade Drive Motor 15 hp (11.1kW) 15 hp (11.1kW) 20 hp (15kW)
Blade Speeds 30-150 fpm (9-45.7mpm) 30-150 fpm (9-45.7mpm) 30-150 fpm (9-45.7mpm)
Blade Size (LxWxGage) 11.2 x 0.079 x 0.069" (285 x 2 x 1.75mm) 14.2 x 0.102 x 0.089" (360 x 2.6 x 2.25mm) 18 x 0.106 x 0.089" (460x2.7x2.25mm)
Auto Index Stroke Length 0.24 to 24" (6-600mm) 0.24 to 24" (6-600mm) 0.24 to 24" (6-600mm)
Floor Space Required (LxW) 110 x 270" (2780 x 6850mm) 111.5 x 272" (2920 x 6900mm) 123 x 285" (3120x7230mm)
Weight 6713 lbs (2800kg) 7937 lbs (3600kg) 9260 lbs (4200kg)
www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
7
Vertical Contour Saws
Contour Cutting Series
Among the most versale machines
available, vercal contour saws cut
aluminum, brass, copper, mild steel,
tough tool steel, stainless steel and
sheet metal as well as nonmetals like
plascs, paper and brous materials.
Plus, they’re available with a wide variety
of aachments for contour cung, miter
cung, disc cung and more.
Popular DoALL oponal accessories are
shown below.
2013-V3 3613-V5
DoALL Model Number 2012-VH 2013-V2 2013-V3 2013-V5 3612-VH 3613-V3 3613-V5
Rectangle Capacity at 90°
Round Capacity at 90° 12" (305mm) 13" (330mm) 13" (330mm) 13" (330mm) 12" (305mm) 13" (330mm) 13" (330mm)
Blade Drive Motor 3 hp (2.23kW) 2 hp (1.5kW) 3 hp (2.23kW) 5 hp (3.75kW) 3 hp (2.23kW) 3 hp (2.23kW) 5 hp (3.75kW)
Blade Speeds
Blade Size (LxW)
Floor Space Required
(LxWxH)
Weight 1650 lbs (748kg) 1250 lbs (567kg) 1250 lbs (567kg) 1250 lbs (567kg) 2200 lbs (998kg) 1550 lbs (703kg) 1550 lbs (703kg)
20 x 12"
(510 x 305mm)
30-5500 fpm
(9-1680mpm)
154 x 1/8" - 1"
(3912 x 3.2-25.4mm)
54 x 58 x 82"
(1380 x 1475 x 2070mm)
20 x 13"
(510 x 330mm)
55-5200 fpm
(17-1585mpm)
154 x 1/8" - 1"
(3912 x 3.2-25.4mm)
44 x 55 x 80"
(1128 x 1399 x 2036mm)
20 x 13"
(510 x 330mm)
30-5500 fpm
(9-1680mpm)
154 x 1/8" - 1"
(3912 x 3.2-25.4mm)
54 x 45 x 82"
(1360 x 1145 x 2070mm)
20 x 13"
(510 x 330mm)
550-5500 fpm
(170-1680mpm)
154 x 1/8" - 1"
(3912 x 3.2-25.4mm)
54 x 45 x 82"
(1360 x 1145 x 2070mm)
36 x 12"
(915 x 305mm)
30-5500 fpm
(9-1680mpm)
199 x 1/8" - 1"
(5055 x 3.2-25.4mm)
74 x 45 x 82"
(1880 x 1145 x 2070mm)
36 x 13"
(915 x 330mm)
30-5500 fpm
(9-1680mpm)
199 x 1/8" - 1"
(5055 x 3.2-25.4mm)
74 x 45 x 82"
(1880 x 1145 x 2070mm)
36 x 13"
(915 x 330mm)
550-5500 fpm
(170-1680mpm)
199 x 1/8" - 1"
(5055 x 3.2-25.4mm)
74 x 45 x 82"
(1880 x 1145 x 2070mm)
Guide blocks
Rip fence Secondary table
Chip blower
Miter aachment Upper saw guide block
Work holding jaw with handles
Blade welder
Magnifying aachment
Work light
Mist lubricaon
8
www.DoALLsaws.com | 888.362.5572
High Production Saws
Zephyr™ Series
DoALL high velocity Zephyr™ series
fricon saws are designed to run at
a high rate of speed to cut the most
dicult of materials with relave
ease and exceponal accuracy.
DoALL Model Number ZV-3620
Rectangle Capacity at 90° 36 x 15" (914 x 381mm)
Round Capacity at 90° Up to 20" (510mm)
Blade Drive Motor 15 hp (11.1kW)
Blade Speeds 1000-15000 fpm
Blade Size (LxW) 232 - 240 x .125" - 1"
Floor Space Required
(LxWxH)
Weight 3000 lbs (1361kg)
(305-4570mpm)
(5893-6096 x 3.2-25.4mm)
52-1/2 x 80"
(1334 x 2032mm)
ZV-3620
Vertical Diamond Saws
Diamond Series
DoALL vercal diamond band saws
are ideal for cung materials
that are brile or easily crumble
including, but not limited to, silicon,
quartz and glass. These upright
saws are designed to cut a wide
variety of friable materials.
2012-D12
DoALL Model Number 2012-D12 2612-D24 2613-D36 D-900
Rectangle Capacity at 90° 20 x 12" (510x305mm) 26 x 12" (660x305mm) 26 x 13" (660x330mm) 35 x 16" (900x406mm)
Round Capacity at 90° 12" (305mm) 12" (305mm) 13" (330mm) 16" (406mm)
Blade Drive Motor 5 hp (3.75kW) 5 hp (3.75kW) 5 hp (3.75kW) 15 hp (11.1kW)
Blade Speeds
Blade Size (LxW)
Floor Space Required
(LxWxH)
Weight 1650 lbs (748kg) 1900 lbs (862kg) 4500 lbs (2041kg) 4500 lbs (2041kg)
550-5500 fpm
(170-1680mpm)
154 x 1"
(3912 x 25.4mm)
54 x 58 x 82"
(1380 x 1475 x 2070mm)
550-5500 fpm
(170-1680mpm)
154 x .5"-1"
(3912 x 13-25.4mm)
60 x 45 x 82"
(1524 x 1143 x 2070mm)
1000-4000 fpm
(305-1219mpm)
186 x .5"-.75"
(4725 x 13-19mm)
95 x 64 x 82"
(3413 x 1626 x 2070mm)
D-900
1000-5000 fpm
(305-1525mm)
234 x 1.25"
(5940 x 32mm)
95 x 64 x 82"
(3413 x 1626 x 2070mm)
www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
9
Do You Make Straight Cuts or Do You Make Angled/Miter Cuts?
Straight Cuts - 90 Degrees Only
Do you need to Bundle Cut your Material?
No Bundling
Are you looking for a Manual or Automac Saw? Are you looking for a Semi-Automac or Automac Saw?
Manual
Model Capacity Pg
DS-280M 8 x 11" 3
400-S 10 x 16" 3
DS-320M 11.75x 12.5" 3
TF-1418 14 x 18" **
2012-VH 20 x 12" 8
2013-V2 20 x 13" 8
2013-V3 20 x 13" 8
2013-V5 20 x 13" 8
3612-VH 36 x 12" 8
3613-V3 36 x 13" 8
3613-V5 36 x 13" 8
Automac Operaon Semi-Automac Automac Operaon
Sawing Environment Sawing Environment Sawing Environment
Addional Categories
Circular Saws
Model Capacity Pg
Intermient Duty
Model Capacity Pg
S-320CNC 11.75 x 12.5" 3
DS-500CNC 14 x 20" 3
Extreme Duty
Model Capacity Pg
DC-280NC 11 x 11.75" 6
DC-330NC 13 x 15.75" 6
DC-420NC 16.5x 16.5" 6
DC-460NC 18 x 20" 6
DC-560NC 22 x 23.6" 6
DC-700NC 27 x 31" 6
ZV-3620 36 x 15" 9
DC-800NC 31.4 x 39.4" 6
SC-75A Up to 3" 7
SC-100A Up to 4" 7
SC-150A Up to 6" 7
Diamond Saws
Model Capacity Pg
2012-D12 20 x 12" 9
2612-D24 26 x 12" 9
2613-D36 26 x 13" 9
D-900 35 x 16" 9
Portal & Table Saws
Hercules Extreme Duty
Model Capacity Pg
DC-620CNC 24 x 22" 5
DC-850CNC 33.5 x 40" 5
DC-120CNC 47.25 x 63" 5
DC-1600CNC 49.25 x 63" 5
Intermient Duty
Model Capacity Pg
DS-320SA 11.75 x 12.5" 3
DS-500SA 14 x 20" 3
DS-600SA 18 x 23.5" 3
Extreme Duty
Model Capacity Pg
DC-280SA 11.75 x 11" 6
DC-330SA 15.75 x 13" 6
TDC-400SA 16 x 16" 5
TDC-600SA 20 x 24" 5
DC-500SA 22 x 19.7" 6
TDC-1400SA 28 x 55" 5
DC-560SA 31.5 x 22" 6
TDC-1000SA 38 x 40" 5
DC-800SA 39.4 x 31.5" 6
DC-1100SA 43.5 x 43.5" 6
DC-1700SA 51.25 x 67" 6
Bundling Cung Available
S-320CNC 11.75 x 12.5" 3
DS-500CNC 14 x 20" 3
DC-280NC 11 x 11.75" 6
DC-300CNC 12 x 12" 4
DC-330NC 13 x 15.75" 6
DS-500CNC 14 x 20" 4
DC-420NC 16.5 x 16.5" 6
DC-400CNC 16 x 16" 4
TDC-400CNC 16 x 16" 5
DC-460NC 18 x 20" 4
DC-510CNC 20 x 20" 4
TDC-600CNC 20 x 24" 5
DC-560NC 22 x 24" 4
DC-750CNC 28 x 30" 4
DC-700NC 31.5 x 39.5" 6
DC-1000CNC 33.5 x 40" 4
TDC-1000CNC 38 x 40" 5
DC-800NC 39.4 x 31.4" 6
DC-1400SA 47 x 55" 4
Intermient Duty
Model Capacity Pg
Extreme Duty
Model Capacity Pg
How to Select & Order the Right Band Saw
Use the Band Saw Selector chart as a guide to idenfy the right saw for typical
sawing applicaons. Consider the following condions in making your choice:
1. Miter vs. Non-Miter Cuts. If material needs to be cut at any angle other
than straight, choose a miter-cung band saw.
2. Individual Cuts or Nested/Bundle Cung. Bundle cung is good when
cung long bundles into short bundles because it eliminates the need to
break and re-strap the bundles.
3. Manual vs. Semi-Automac vs. Automac. A manual saw requires an
operator to manually feed the material, li the saw head and close the
vise. A semi-automac saw has a hydraulic or pneumac vise that raises
and lowers the saw head but requires an operator to feed the material.
An automac saw needs an operator to program a saw for fully automated
material feed (indexing) and cung.
4. Extreme or Intermient Duty. In extreme duty producon applicaons
(6 or more hours per shi or high cung rates) a heavy-duty saw, wide band,
and more horsepower provide greater producvity and reliability.
10
www.DoALLsaws.com | 888.362.5572
Angle or Miter Cuts - up to 60 Degrees
Do you need to Bundle Cut your Material?
No Bundling
Are you looking for a Manual or Automac Saw? Are you looking for a Manual, Semi-Automac or Automac Saw?
Manual Operaon
Model Capacity Pg
400-S 10 x 16" 3
TF-1418 14 x 18" **
Table Tilts
2012-VH 20 x 12" 8
2013-V2 20 x 13" 8
2013-V3 20 x 13" 8
2013-V5 20 x 13" 8
3612-VH 36 x 12" 8
3613-V3 36 x 13" 8
3613-V5 36 x 13" 8
Automac Operaon Semi-Automac
Sawing Environment Sawing Environment
StructurALL
Model Capacity Pg
S-320CNC 11.75x 12.5" 3
S-500CNC 14 x 20" 3
Manual Operaon
Saw Type
StructurALL®
Model Capacity Pg
DS-280M 8 x 11" 3
400-S 10 x 16" 3
DS-320M 11.75 x 12.5" 3
Bundling Cung Available
Intermient Duty
Model Capacity Pg
DS-320SA 11.75 x 12.5" 3
DS-500SA 14 x 20" 3
DS-600SA 18 x 23.5" 3
Extreme Duty
Model Capacity Pg
DCDS-600SA 16 x 24" 2
DCDS-750SA 19 x 30" 2
Automac Operaon
Sawing Environment
Intermient Duty
Model Capacity Pg
S-320CNC 11.75 x 12.5" 3
S-500CNC 14 x 20" 3
Extreme Duty
Model Capacity Pg
DCDS-600NC 16 x 24" 2
DCDS-750NC 19 x 30" 2
** Available but not shown
Other Factors to Consider
• Design Capacity vs. Eecve Capacity. A saw is most eecve
in materials from 1/3 to 2/3 of the rated size capacity. Using a
12″ capacity saw is not ideal for cung 12″ solids all day.
• Exoc Materials vs. Mild Materials. Hard-to-cut materials, like
Inconel® and 316 stainless, are best cut with high producon,
heavy-duty machines and wide blades.
• Budget vs. The Right Machine. Purchasing a less expensive
machine may fall within your budgetary constraints, but not
selecng the right machine may cost you in lost producon.
• A DoALL representave will help you select the right machines
for all your applicaons.
www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
11
Band Saw Blades
DoALL invented the Bi-Metal band saw blade and released many improvements over the years. Today
we are sll the trendseer in band saw blade technology. We have producon facilies in the USA,
Canada, Mexico, Asia as well as in Europe. Besides having our own team of dedicated band saw blade
experts, we have factory authorized distributors around the world who are focused on band saw
blades, with many of them managing their own weld centers. Our network is able to provide technical
support and fast response to any issue. We are commied to your sasfacon and look forward to
serving you.
Cutting & Grinding Fluids
DoALL Sawing Products has been manufacturing cung and grinding uids since the 1950s. We
oer a broad range of cung oils like synthecs, semi-synthecs, soluble oils and straight oils. Our
product line also includes grinding uids, direct applicaon machine tool lubricants, metalworking
and machining coolants and lubricants, hydraulic, transmission, gear, way and spindle oils. We also
promote specialty uids like cleaners, removers, tank addives, aerosols, mists and Minimal Quanty
Lubricaon (MQL) lubricants. DoALL Sawing Products has a knowledgeable sales team and distributor
network that market metalworking cung products worldwide. DoALL is commied to providing
customers with high quality, cost-eecve performance uids to improve operaons and reduce costs.
At DoALL, we are dedicated to oering environmentally friendly and worker safe soluons to meet all
your machining needs.
At Your Service!
We have our own team of engineers and factory authorized distributors around the world who are saw
blade focused who manage their own weld centers. They are able to provide technical support and
fast response to any issue.
We are committed to your satisfaction and look forward to serving you.
Additional Sawing Resources
DoALL replacement and repair parts are now available
24-hours a day online at www.DoALLsaws.com/store
Ask about our DoALL University training program and sharpen your skills today!
Class includes 4 hours of training on the 3 elements of sawing (saws, blades and uids).
5505 West 123rd Street
Savage, MN 55378 USA
www.DoALLsaws.com
1-888-362-5572
Catalog Number DSP-SAWS12PGW-07072018
Copyright © 2018 DoAll Sawing Products. All Rights Reserved. No image(s) or part(s) from this publicaon may be reproduced without the wrien permission of Connental Machines, Inc.
Opons, specicaons and any product informaon is subject to change without noce or obligaon. Machine safety items may be omied for illustraon purposes only --
For proper applicaon, always read the operaon manual. DoALL, StructurALL and SAM - The Sawing Answer Man are all registered trademarks of DoALL Company.
12
www.DoALLsaws.com | 888.362.5572
Loading...