DoAll DCDS-750NC User Manual

Horizontal

Structural Saws

DoALL StructurALL® series metal cung band saws are
among the best mul-purpose horizontal band saws in
the industry. Specially engineered for high performance in
fabricang environments, these horizontal swivel or scissor
style saws are built for speed, accuracy and increased prots
for your business.

DCD0S-600SA

Horizontal Structural Saw –

17.25 x 24" Rectangular Capacity

and 18" Round Capacity

DoALLoers a full range of StructurALL metal cung band
saws with round capacies up to 21". A large variety of oponal
accessories are available to customize these machines
for specic sawing requirements. DoALL StructurALL
metalworking saws are an economical, opon to meet your
needs without straining your budget!

Solutions for ALL Your Sawing Needs

5505 West 123rd Street, Savage, MN 55378 | www.DoALLsaws.com | 888.362.5572

DoALL dual column, dual swivel are ideal for producon sawing
of a large variety of materials including, but not limited to,
structural solids, stainless and tool steel. Double column,
double miter saws are ideal machines for a fabricator cung
mulple angles in the same work piece.

DoALL Model Number DCDS-600SA DCDS-600NC DCDS-750SA DCDS-750NC
Warranty Parts/Service Parts/Service Parts/Service Parts/Service
Warranty Length 2-year standard 2-year standard 2-year standard 2-year standard
Capacity Rectangle at 90° HxW 17.25 x 24" (440x610mm) 17.25 x 24" (440x610mm) 19 x 30" (480x750mm) 19 x 30" (480x750mm)
Capacity Round at 90° 18.5" (470mm) 18.5" (470mm) 20" (500mm) 20" (500mm)
Round Solid Capacity at 90° 9-7/8" (250mm) 9-7/8" (250mm) 15-3/4" (400mm) 15-3/4" (400mm)
Rectangle Capacity at 45° 19.5 x 16.3" (495x415mm) 19.5 x 16.3" (495x415mm) 19.7 x 18.9" (500x480mm) 19.7 x 18.9" (500x480mm)
Round Capacity at 45° 18.5" (470mm) 18.5" (470mm) 19.7" (500mm) 19.7" (500mm)
Rectangle Capacity at 60° 12 x 16.7" (305x425mm) 12 x 16.7" (305x425mm) 13 x 18.9" (330x480mm) 13 x 18.9" (330x480mm)
Round Capacity at 60° 13" (330mm) 13" (330mm) 13" (330mm) 13" (330mm)
Blade Drive Motor 5 hp (4kW) 5 hp (4kW) 5 hp (4kW) 5 hp (4kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Maximum Blade Length 238-1/2" (6060mm) 238-1/2" (6060mm) 256" (6500mm) 256" (6500mm)
Blade Widths & Gage 1-1/4 x 0.042" (34x1.1mm) 1-1/4 x 0.042" (34x1.1mm) 1-1/2" x 0.05" (41x1.3mm) 1-1/2" x 0.05" (41x1.3mm)
HMI Controller Mitsubishi Mahler Mitsubishi Mahler
Standard Indexer N/A 6.56  (2m) N/A 6.56  (2m)
More informaon at doallsaws.com/dcds-600sa doallsaws.com/dcds-600nc doallsaws.com/dcds-750sa doallsaws.com/dcds-750nc
Material Pass Line Height 31-1/2" (800mm) 31-1/2" (800mm) 32" (815mm) 32" (815mm)
Floor Space Required 138 x 69 x 87" (3500x1760x2200mm) 126 x 192 x 94" (3200x4880x2390mm) 142 x 67 x 95" (3600x1700x2400mm) 142 x 232 x 95" (3600x5880x2400mm)
Weight 3715 lbs (1685kg) 8455 lbs (3835kg) 4409 lbs (2000kg) 9149 lbs (4150kg)
Miter Cung/Head Tilt on a Tilt Frame 60 degrees Le and Right 60 degrees Le and Right 60 degrees Le and Right 60 degrees Le and Right
Blade Guides Bimetal or Carbide Bimetal or Carbide Bimetal or Carbide Bimetal or Carbide
Feed System Hydraulic Control Electromotor and gearbox Hydraulic Control Electromotor and gearbox
Hydraulic Pump 3.8 hp (2.84kW) 3.8 hp (2.84kW) 3 hp (2.2kW) 3 hp (2.2kW)
Hydraulic Tank Capacity N/A N/A 3.4 gal (13.0 L) 3.4 gal (13.0 L)
Coolant Pump 0.16 hp (0.12kW) 0.16 hp (0.12kW) 0.16 hp (0.12kW) 0.16 hp (0.12kW)
Coolant Tank Capacity 6-5/8 gal (25 lit) 6-5/8 gal (25 lit) 10-1/2 gal (40 lit) 10-1/2 gal (40 lit)
Auto Index Single Stroke Min-Max N/A 0.12-78.7" (3-2000mm) N/A 0.12-78.7" (3-2000mm)
Auto Index Mulple Stroke Min-Max N/A 394" (9999mm) N/A 394" (9999mm)
Max Bundle Capacity at 90° 24" x 10" (610x255mm) 24" x 10" (610x255mm) 29.5" x 10.2" (750x260mm) 29.5" x 10.2" (750x260mm)
Min Bundle Capacity at 90° 0.4" (10mm) 0.4" (10mm) 0.4" (10mm) 3.3" (85mm)
Minimum Bu End 1.2" (30mm) 5.5" (140mm) 1.2" (30mm) 4.7" (120mm)
Vise Hydraulic Hydraulic Hydraulic Hydraulic

Dual Column, Dual Swivel Miter StructurALL® Series

DCDS-600SA

DCDS-600NC

Features and Benefits:

• True dual column design with high rigidity for outstanding cung performance and life

• Dual miter capability up to 60 degrees right and le

• Standard work area lighng

• Oponal right and le modular work conveyors

• Oponal power work conveyors

• Oponal li conveyors

• Oponal right and le work roll table to ease movement of material

2

DCDS-750NCDCDS-750SA

www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572

3

DoALL oers a variety of low cost, general purpose
producon metal-cung band saws. These saws are ideal
for small shops and maintenance facilies that have an
occasional need to cut structural material. A large variety of
oponal accessories are available to customize the machine
for specic sawing requirements.

DoALL Model Number DS-280SA S-280CNC DS-400CNC DS-500SA

Warranty Parts/Service Parts/Service Parts/Service Parts/Service
Warranty Length 2-year standard 2-year standard 2-year standard 2-year standard
Capacity Rectangle at 90° HxW 7 x 11" (180x280mm) 9 x 11" (220x280mm) 14 x 16" (350x400mm) 14 x 20" (360x500mm)
Capacity Round at 90° 9" (230mm) 9.5" (240mm) 15" (380mm) 15" (380mm)
Round Solid Capacity at 90° 5-7/8" (150mm) 5-7/8" (150mm) 9-7/8" (250mm) 9-7/8" (250mm)
Rectangle Capacity at 45° 7.1 x 6.7" (180x170mm) 7.5 x 6.7" (190x170mm) 13 x 4.7" (330x120mm) 15.75 x 7.5" (400x190mm)
Round Capacity at 45° 7.5" (190mm) 7.5" (190mm) 7.1" (180mm) 14.2" (360mm)
Rectangle Capacity at 60° 4.7 x 4.3" (120x110mm) 4.7 x 5.9" (120x150mm) N/A 10.6 x 12.6" (270x320mm)
Round Capacity at 60° 4.7" (120mm) 4.7" (120mm) N/A 12.2" (310mm)
Blade Drive Motor 2 hp (1.5kW) 3 hp (2.23kW) 4 hp (3kW) 4 hp (3kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Maximum Blade Length 107" (2720mm) 117" (2980mm) 178" (4520mm) 188" (4780mm)
Blade Widths & Gage 1 x 0.035" (27x0.9mm) 1 x 0.035" (27x0.9mm) 1-1/4 x 0.042" (34x1.1mm) 1-1/4 x 0.042" (34x1.1mm)
HMI Controller Mitsubishi Saw Micro - Czech Saw Micro - Czech Mitsubishi
Standard Indexer N/A N/A 1.6'  (0.49m) N/A
More informaon at doallsaws.com/ds-280sa doallsaws.com/ds-280cnc doallsaws.com/ds-400cnc doallsaws.com/ds-500sa
Material Pass Line Height 31-1/3" (795mm) and 37" (940mm) 37" (940mm) 37" (940mm) 32-1/3" (820mm)
Floor Space Required 74 x 42 x 77" (1860x1045x1950mm) 85 x 87 x 75" (2150x2200x1900mm) 91 x 108 x 99" (2300x2750x2500mm) 109 x 38 x 90" (2750x950x2270mm)
Weight 871 lbs (395kg) 1764 lbs (800kg) 2921 lbs (1325kg) 1576 lbs (715kg)
Miter Cung/Head Tilt on a Tilt

Frame
Blade Guides Bimetal or Carbide Hardmetal Hardmetal Cast iron
Feed System Semi-Automac Hydraulic Hydraulic Control Hydraulic Control Semi-Automac Hydraulic
Hydraulic Pump 1/2 hp (0.37kW) 1.14 hp (0.85kW) 1.14 hp (0.85kW) 0.07 hp (0.05kW)
Coolant Pump 0.07 hp (0.05kW) 0.12 hp (0.09kW) 0.07 hp (0.05kW) 0.6 hp (0.44kW)
Coolant Tank Capacity 2-3/8 gal (10 lit) 2-3/8 gal (10 lit) 5-1/4 gal (20 lit) 5-1/4 gal (20 lit)
Auto Index Single Stroke Min-Max N/A 0.12-19.7" (3-500mm) 0.12-19.3" (3-490mm) N/A
Auto Index Mulple Stroke Min-Max N/A 126" (3200mm) 126" (3200mm) N/A
Max Bundle Capacity at 90° 7 x 4.7" (180x120mm) 9 x 3.9" (230x100mm) 15.7" x 8.3" (400x210mm) 19.7" x 8.7" (500x220mm)
Min Bundle Capacity at 90° 0.20" (5mm) 0.20" (5mm) 0.20" (5mm) 0.20" (5mm)
Minimum Bu End N/A 7.5" (190mm) 11" (280mm) N/A
Vise Hydraulic Hydraulic Hydraulic Hydraulic

60 degrees Right and 45 degrees Le 60 degrees Right in Semi-auto mode

only

45 degrees Le and Right in Semi-auto
mode only

60 degrees Le and Right

DS-280SA

General Purpose Miter StructurALL Series

DS-280CNC

Features and Benefits:

• Wide range of blade speeds

• Over feed protecon

• High level of dampening with use of many key cast
components

• Li points of the machine are clearly indicated for ease of
movement and installaon

• Oponal right or le miter modular designed work
conveyors in 40" and 80" lengths

• Oponal power roller conveyor make moving heavy
material easy

4

DS-500SADS-400CNC

www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572

5

Horizontal Miter and Non-Miter StructurALL Series

DoALL miter and non-miter saws increase exibility and
improve eciency in fabricaon shops or other sawing
applicaons that require the ecient cung of structural
material. DoALL oers a full range of saws that feature a
variety of cung capacies with both straight and angle
cung opons.

400A 400AV 400M 400S 500DS 500S 500SNC 800SNC

DoALL Model Number 400-M 400-S 400-A 400-AV

Warranty Parts Only Parts Only Parts Only Parts Only
Warranty Length Send new parts Send new parts Send new parts Send new parts
Capacity Rectangle at 90° HxW 10 x 16" (254x406mm) 10 x 16" (254x406mm) 10 x 16" (254x406mm) 10 x 16" (254x406mm)
Capacity Round at 90° 10-3/4" (273mm) 10-3/4" (273mm) 10-3/4" (273mm) 10-3/4" (273mm)
Rectangle Capacity at 45° N/A 9 x 10-3/4" (229x273mm) N/A N/A
Round Capacity at 45° N/A 10-3/4" (273mm) N/A N/A
Blade Drive Motor 2 hp (1.5kW) 2 hp (1.5kW) 3 hp (2.23kW) 3 hp (2.23kW)
Blade Speeds 105-275 fpm (32-82mpm) 105-275 fpm (32-82mpm) 50-400 fpm (15-120mpm) 50-400 fpm (15-120mpm)
Maximum Blade Length 158" (4013 mm) 158" (4013 mm) 158" (4013 mm) 158" (4013 mm)
Blade Widths & Gage 1 x 0.035" (25.4x0.89mm) 1 x 0.035" (25.4x0.89mm) 1 x 0.035" (25.4x0.89mm) 1 x 0.035" (25.4x0.89mm)
DoALL Standard Saw Blade 333258158 333258158 333258158 333246157
More informaon at doallsaws.com/400m doallsaws.com/400s doallsaws.com/400a doallsaws.com/400av
Work Height 29-1/2" (750mm) 29-1/2" (750mm) 29-1/2" (750mm) 29-1/2" (750mm)
Material Pass Line Height 26-1/8" (664mm) 29-1/8" (740mm) 26-1/8" (664mm) 26-1/8" (664mm)
Floor Space Required 87 x 37 x 55" (2210x940x1397mm) 87 x 42 x 55" (2210x1067x1397mm) 90 x 54 x 55" (2286x1372x1397mm) 90 x 54 x 55" (2286x1372x1397mm)
Weight 1100 lbs (499kg) - spec states 1065lbs 1200 lbs (544kg) - spec says 1150 lbs 1320 lbs (599kg) 1450 lbs (658kg)
Blade Guides Carbide faced Carbide faced Carbide faced Carbide faced

Feed System

Hydraulic Pump N/A N/A N/A N/A
Hydraulic Tank Capacity N/A N/A N/A N/A
Cooling System Flood standard, Mist oponal Flood standard, Mist oponal Flood standard, Mist oponal Flood standard, Mist oponal
Coolant Tank Capacity 6 gal (22 lit) 6 gal (22 lit) 5 gal (18 lit) 5 gal (18 lit)
Auto Index Single Stroke Min-Max N/A N/A 1-16" (54-406mm) 1-16" (54-406mm)
Auto Index Mulple Stroke Min-Max N/A N/A 0-22" (559mm) 0-22" (559mm)
Minimum Bu End N/A N/A 8" (203mm) N/A
Vise Manual Manual Manual Manual
Table Capacity 1800 lbs (816kg) 1800 lbs (816kg) 3000 lbs (1361kg) 3000 lbs (1361kg)

Hydraulic Control, Innitely variable,
Spring balanced head

Hydraulic Control, Innitely variable,
Spring balanced head

Hydraulic Control, Innitely variable,
Spring balanced head

Hydraulic Control, Innitely variable,
Spring balanced head

Features and Benefits:

DoALL Model Number 500-S 500-DS 500-SNC 800-SNC

Warranty Parts Only Parts Only Parts/Service Parts/Service
Warranty Length Send new parts Send new parts 1 year standard 1 year standard
Capacity Rectangle at 90° HxW 14 x 20" (355x510mm) 14 x 20" (355x510mm) 14 x 20" (355x510mm) 21 x 31-1/2" (530x800mm)
Capacity Round at 90° 14-3/4" (375mm) 15" (381mm) 14-3/4" (375mm) 21" (530mm)
Rectangle Capacity at 45° 14 x 14" (356x356mm) 14 x 14" (356x356mm) 14 x 13" (356x330mm) 21 x 16" (533x406mm)
Round Capacity at 45° 14-3/4" (375mm) 15" (381mm) 13" (330mm) 16" (406mm)
Rectangle Capacity at 60° 14 x 8" (356x203mm) 14 x 8" (356x203mm) 14 x 8" (356x203mm) 21 x 14" (533x356mm)
Round Capacity at 60° 8" (203mm) 10" (254mm) 10" (254mm) 14" (356mm)
Blade Drive Motor 5 hp (3.75 kW) 5 hp (3.75 kW) 5 hp (3.75 kW) 10 hp (7.5kW)
Blade Speeds 50-400 fpm (15-120mpm) 50-400 fpm (15-120mpm) 50-400 fpm (15-120mpm) 75-400 fpm (23-122mpm)
Maximum Blade Length 197" (5003mm) 197" (5003mm) 197" (5003mm) 271" (6883mm)
Blade Widths & Gage 1-1/4 x.042" (32x1.1mm) 1-1/4 x.042" (32x1.1mm) 1-1/4 x.042" (32x1.1mm) 1-1/2 x 0.05" (38x1.3mm)
DoALL Standard Saw Blade 303902197 303902197 303902197 320458271
More informaon at doallsaws.com/500s doallsaws.com/500ds doallsaws.com/500snc doallsaws.com/800snc
Work Height 14" (356mm) N/A 29" (737mm) 21" (533mm)
Material Pass Line Height 29" (737mm) 29-1/2" (750mm) 29" (737mm) 36" (914mm)
Floor Space Required 96 x 60 x 92.5" (2438x1524x2350mm) 98 x 102 x 90" (2489x2591x2286mm) 96 x 102 x 90" (2348x2591x2286mm) 155 x 185 x 111" (3937x4699 x2819mm)
Weight 3000 lbs (1361kg) 2400 lbs (1089kg) 3000 lbs (1361kg) 10800 lbs (4899 kg)
Blade Guides Carbide faced Carbide faced Carbide faced Spring loaded carbide inserts
Feed System Force/Rate Force/Rate Force/Rate Adjustable feed rate and feed force
Hydraulic Pump 1-1/2 hp (1.12kW) 1-1/2 hp (1.12kW) 2 hp (1.5kW) 3 hp (2.23kW)
Hydraulic Tank Capacity 3 gal (11.4 L) 3 gal (11.4 L) 12 gal (45 L) 15 gal (562 L)
Cooling System Flood standard, Mist oponal Flood standard, Mist oponal Flood standard, Mist oponal Flood standard, Mist oponal
Coolant Tank Capacity N/A N/A N/A 20 gal (76 lit)
Auto Index Single Stroke Min-Max N/A N/A 14-40" (356-1016mm) 26-60" (660-1524mm)
Minimum Bu End N/A N/A 14" (356mm) 26" (660mm)
Vise Hydraulic full height and stroke Hydraulic full height and stroke Hydraulic full height and stroke Hydraulic full stroke
Table Capacity 1800 lbs (816kg) N/A 1800 lbs (816kg) 3000 lbs (1361kg)

• Extremely accurate

• Large variety of opons available for custom applicaons

• Budget friendly list pricing

• Wide band for faster cung speeds

• Fast, accurate cut posioning

• Simple design for easy saw operaon

6

www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572

7

StructurALL Horizontal Structural Saws

Standard Equipment on most models:

• HMI saw control

• Digital read out of cung angle

• Work light

• Hydraulic band tension

• Feed rate indicator

• Automac feed control

• Automac guide arm seng

• Band brush

• Safety covers

• Flood coolant

• Tool kit

• Complimentary DoALL cung uids package

• One DoALL bi-metal saw blade

• Instrucon and parts manuals on CD

Visit www.DoALLsaws.com for most accurate informaon
on standard equipment and accessories

Optional Accessories on most models:

• Chain chip conveyor with pan

• Front and rear vise nesng

• Mist-style saw band lubricaon

• Laser line generator

• Cut piece collecon box with drain

• Large chip pan with drain

• Handle for chip pan or collecon box

• Input or output roller conveyors

• Heavy-duty input or output roller conveyors

• Input and output powered conveyor for angle cuts

• Indexing extension

• Hydraulic li input or output roller conveyor

• Fixed or movable side vercal guide roller

• Vercal hold down

• Addional conveyor rollers

• Wear parts service kit

Gear driven band brush Full stroke visesInsert assemblyLaser

Work height sensorWork light

DSP STRUCT090616
Copyright © 2016 DoAll Sawing Products. All Rights Reserved. No image(s) or part(s) from this site may be reproduced without the wrien permission of Connental Machines, Inc.
Opons, specicaons, prices and site content is subject to change without noce or obligaon. Machine safety items may be omied for illustraon purposes only -- For proper
applicaon, always read the operaon manual.

8

www.DoALLsaws.com | 888.362.5572

Band door interlocks

Wear plates

5505 West 123rd Street

Savage, MN 55378 USA

www.DoALLsaws.com

1-888-362-5572