Page 1
VERTICAL
CONTOUR
SAWS
2013-V
3613 -1
OVERVIEW
Vertical contour saws are among the most versatile sawing machines on the market today. They are widely
used in machine shops, mold shops, maintenance departments, schools and in other areas where cutting
a wide variety of materials is required. Machines are available in sizes to fit your needs and feature band
speeds that permit contouring, cut-off, and machining of almost any material.
The wide variety of available accessories have been engineered to extend the machines’ versatility and
productivity even further. They provide close tolerance machining and productivity even further. They provide
close tolerance machining and reliable operation, extended operating life and reduced machining time.
Solutions For All Your Sawing Needs / Made in the USA / w w w.doallsawing.com
Page 2
26" diameter band
wheels minimize
band fatigue allowing for lower cost
per cut.
VERTICAL
CONTOUR
SAWS
Standard Equipment
• High-speed, insert-type guide blocks
for 1/16"-1/2" bands
• Steel guide inserts for bands 1/4",
3/8" and 1/2"
• Job selector
• Band speed indicator
• Chip pan
• Band tension indicator
• Dual range transmission
• Band door interlocks
• Variable frequency AC drive
2613 -V3
Band speed control is conveniently
located on the
operator panel.
26" throat depth
is ideal for cutting
large workpieces.
Optional Accessories
• Fabricated steel auxiliary table
• DBW-15 welder
• Work jaw with handles
• Chip blower
• Mist coolant assembly
• Band lubricator
• Worklight
• Magnifying attachment
• Standard rip fence
• Cut-off and mitering attachment
• Glide table assembly
• Air operated power feed assembly
• Disk cutting attachment
• Post elevating handwheel
• Chip box
• 18", 24" or 30" extended work heights
American-made DoALL vertical contour saws are used daily for contour sawing, miter cutting, or rip sawing
a wide variety of materials including ferrous and non-ferrous metals, wood, plastic, glass, rubber, foam and
other low density materials.
Solutions For All Your Sawing Needs / Made in the USA / w w w.doallsawing.com
Page 3
Optional Accessories
VERTICAL
CONTOUR
SAWS
Miter Attachment
Mist Coolant
Magnifying attachment
Protractor workstop Rip Fence Work jaws
Disk cutting attachment Air power feed Blade welder
Glide table
Chip blower Dust spout
18" hydraulic stroke table
Inserts and guide blocks
Post elevating handwheel
Worklight
Accessories extend versatility and increase productivity
Solutions For All Your Sawing Needs / Made in the USA / w w w.doallsawing.com
Page 4
2013-V 2013-V3 2013-V5 2012-VH 2613-V3 3613-1 3613-V3 3613-V5 3612-VH
Throat band
to column
Maximum
work height
Band width
capacity
Saw band
length
Variable
band
speed
Table (tilts
45ºR, 10ºL)
Table to
floor height
AC drive
motor
Table stroke NA NA NA
Table feed
(hydraulic)
Table feed
force
Table
capacity
Wheels
Upper
wheel
adjustment
Height,
maximum
Floor area
required
Weight
20"
(508mm)
13"
(330mm)
1/16 to 1"
(1.5 to 27mm)
154"
(3,910mm)
55-300 fpm
(17-90mpm)
960-5,200 fpm
(292-
1,585mpm)
26 x 26"
(660 x 660mm)
39"
(990mm)
2 hp AC
(1.5 kW)
NA NA NA
NA NA NA
500 lb
(227 kg)
Aluminum with
crowned
rubber
tires
3"
(75mm)
80-1/4"
(2,038mm)
53-1/2 x 45"
(1,360 x
1,145mm)
1,250 lb
(567 kg)
20"
(508mm)
13"
(330mm)
1/16 to 1"
(1.5 to 27mm)
154"
(3,910mm)
30-320 fpm
(10-100mpm)
550-5,500 fpm
(170-
1,680mpm)
26 x 26"
(660 x 660mm)
39"
(990mm)
3 hp AC
(2.25 kW)
500 lb
(227 kg)
Aluminum with
crowned
rubber
tires
3"
(75mm)
80-1/4"
(2,038mm)
53-1/2 x 45"
(1,360 x
1,145mm)
1,250 lb
(567 kg)
20"
(508mm)
13"
(330mm)
1/16 to 1"
(1.5 to 27mm)
154"
(3,910mm)
550-5,500 fpm
(170-
1,680mpm)
26 x 26"
(660 x 660mm)
39"
(990mm)
5 hp AC
(3.75 kW)
500 lb
(227 kg)
Aluminum with
crowned
rubber
tires
3"
(75mm)
80-1/4"
(2,038mm)
53-1/2 x 45"
(1,360 x
1,145mm)
1,250 lb
(567 kg)
SPECIFICATIONS
20"
(508mm)
12"
(305mm)
1/16 to 1"
(1.5 to 27mm)
154"
(3,910mm)
30-320 fpm
(10-100mpm)
550-5,500 fpm
(170-
1,680mpm)
26-1/2 x 33-
1/2"
(675 x 850mm)
40"
(1,020mm)
3 hp
(2.25 kW)
12"
(305mm)
0-6 fpm
(0-1.8mpm)
0-175 lb
(0-79kg)
500 lb
(227 kg)
Flanged with
steel backed
rubber tires
3"
(75mm)
81"
(2,057mm)
54-1/4 x 58"
(1,380 x
1,475mm)
1,900 lb
(863 kg)
1/16 to 1"
(1.5 to 27mm)
(4,648mm)
30-320 / 5505,500 (9 to 73
(660 x 660mm)
Aluminum with
(2184mm)
1,143mm)
26"
(660mm)
13"
(330mm)
183"
mpm)
26 x 26"
NA
3 hp
(2.2 kW)
NA NA NA NA
NA NA NA NA
NA NA NA NA
500 lb
(227 kg)
crowned
rubber
tires
3"
(75mm)
85"
60 x 45"
(1,524 x
1,350 lb
(613 kg)
36"
(915mm)
13"
(330mm)
1/16 to 1"
(1.5 to 27mm)
199"
(5,055mm)
55-300 fpm
(17-90mpm)
960-5,200 fpm
(292-
1,585mpm)
26 x 26"
(660 x 660mm)
39"
(990mm)
3-hp
(2.25 kW)
500 lb
(227 kg)
Aluminum with
crowned
rubber
tires
2"
(51mm)
80"
(2,032mm)
74 x 45"
(1,880 x
1,145mm)
1,460 lb
(634 kg)
36"
(915mm)
13"
(330mm)
1/16 to 1"
(1.5 to 27mm)
199"
(5,055mm)
30-320 fpm
(10-100mpm)
550-5,500 fpm
(170-
1,680mpm
26 x 26"
(660 x 660mm)
39"
(990mm)
3 hp
(2.25 kW)
500 lb
(227 kg)
Aluminum with
crowned
rubber
tires
2"
(51mm)
80"
(2,032mm)
74 x 45"
(1,880 x
1,145mm)
1,460 lb
(634 kg)
(1.5 to 27mm)
550-5,500 fpm
(660 x 660mm)
Aluminum with
36"
(915mm)
13"
(330mm)
1/16 to 1"
199"
(5,055mm)
(170-
1,680mpm)
26 x 26"
39"
(990mm)
5 hp
(3.75 kW)
500 lb
(227 kg)
crowned
rubber
tires
2"
(51mm)
80"
(2,032mm)
74 x 45"
(1,880 x
1,145mm)
1,460 lb
(634 kg)
36"
(915mm)
12"
(305mm)
1/16 to 1"
(1.5 to 27mm)
199"
(5,055mm)
30-320 fpm
(10-100m/min)
550-5,500 fpm
(170-
1,680mpm)
26-1/2 x 33-
1/2"
(675 x 850mm)
40"
(1,020mm)
3 hp
(2.25 kW)
12"
(305mm)
0-6 fpm
(0-1.8mpm)
0-175 lb
(0-79kg)
500 lb
(227 kg)
Flanged with
steel backed
rubber tires
3"
(75mm)
80"
(2,032mm)
74 x 45"
(1,880 x
1,145mm)
2,200 lb
(990 kg)
Solutions For ALL Your Sawing Needs
888-362-5572 | www.doallsawing.com
Photographs may show optional
equipment.
Specifications subject to change
without notice or obligation.
Solutions For All Your Sawing Needs / Made in the USA / w w w.doallsawing.com
Loading...