D Link DWLG132A1 User Manual

Download

D-Link

Wireless G USB 2.0 Adapter

AirPlus X

TREME

DWL-G132

802.11g (2.4GHz)

Manual

Building Networks for People

Package Contents ................................................................................3

Introduction............................................................................................4

Features and Benefits ...........................................................................6

Wireless Basics....................................................................................7

Installation Considerations ....................................................................7

Getting Started......................................................................................9

Using the Configuration Utility..............................................................12

Networking Basics ..............................................................................26

Troubleshooting...................................................................................39

T echnical S pecifications ......................................................................42

Contacting T echnical Support..............................................................44

Warranty and Registration ...................................................................45

Package Contents

Contents of Package:

D-Link AirPlus Xtreme GTM DWL-G132



2.4 GHz Wireless G USB 2.0 Adapter Manual on CD-ROM



Quick Installation Guide



Cradle



If any of the above items are missing, please contact your reseller.

System Requirements:

A computer or laptop with an available USB 2.0 port



Windows XP/2000



At least 64MB of memory and a 500MHz processor



Properly installed and working USB Controller



Introduction

The D-Link AirPlus Xtreme G DWL-G132 Wireless G USB Adapter is an

802.1 1b/802.1 1g high-performance,convenient Plug & Play USB 2.0 solution that brings wireless networking to your laptop or desktop PC.

With a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode) you can connect to a wireless network at home, at the office or at any wireless hotspot. Now you can stay connected wherever you are and wherever you go.

The DWL-G132 is Wi-Fi compliant, meaning that it can connect and interoperate with other 802.1 1b or 802.11g Wi-Fi-compliant wireless routers, access points and adapters. The DWL-G132 connects to any available USB port on a laptop or desktop Windows -based computer and also includes a USB cradle. With the optional USB cradle, the DWL-G132 can be positioned virtually anywhere at a workstation to achieve the best available wireless signal reception - whether that workstation is in your office, on your deck or patio, by the pool, at the local coffee shop, or in an airport terminal while waiting to board your next flight.

The adapter works with Microsoft Windows XP and Windows 2000 operating systems to ensure that you’ll be up and running on a wireless network in just a matter of seconds.

Using its default settings, the DWL-G132 automatically connects to other D-Link AirPlus Xtreme G

wireless products as soon as it’s active.

The DWL-G132 has the newest, strongest and most advanced security features available today. When used with other 802.11 WPA (Wi-Fi Protected Access) and 802.1x compatible products in a network with a RADIUS server, the security features include:

WPA: Wi-Fi Protected Access which authorizes and identifies users based

on a secret key that changes automatically at regular intervals. WPA uses TKIP (T emporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This ensures much greater security than the standard WEP security. (By contrast, the previous WEP encryption implementations required the keys to be changed manually.)

*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and evironmental factors lower actual data throughput rate.

Introduction (continued)

802.1x: Authentication which is a first line of defense against intrusion. In the

authentication process, the Authentication Server verifies the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access.

For home users that will not incorporate a RADIUS server in their network, the security for the DWL-G132, used in conjunction with other WPA-compatible

802.11 products, will still be much stronger than ever before. Utilizing the Pre-Shared Key mode of WPA, the DWL-G132 will obt ain a new security key every time it connects to the 802.11 network. You only need to input your encryption information once in the configuration menu. No longer will you have to manually input a new WEP key frequently to ensure security. With the DWL-G132, you will automatically receive a new key every time you connect, vastly increasing the safety of your communication.

Features and Benefits

Provides maximum wireless signal rate of up to 54Mbps



(108Mbps Compact size for placement anywhere.



Convenience of Plug & Play installation.



Fully 802.11b/802.1 1g compatible.



USB 2.0 standard2.



Better Security with 802.1x and WP A - In addition to 64-,128-bit WEP encryption, you can also securely connect to a wireless network using

802.1x for wireless authentication, as well as WPA (Wi-Fi Protected Access) providing you a much higher level of security for your data and communication than has previously been available.

in Turbo mode).



Optimal wireless reception using its cradle (included). Position the DWL-G132 almost anywhere in your workspace to achieve the best reception possible.

Supports Infrastructure networks via an access point and



Peer-to-Peer communication in Ad-Hoc mode.

User-friendly configuration and diagnostic utilities.



Connects at up to 328 feet indoors

1 year warranty.



Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data

throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

Using a USB 1.1 port will adversely affect throughput.

Environmental factors may adversely affect range.

Wireless Basics

D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. Y ou will be able to enjoy the freedom that wireless networking brings.

A wireless local area network (WLAN) is a computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial to many users.

Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.

People use WLAN technology for many different purposes:

Mobility - Productivity increases when people have access to data in any

location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency.

Low Implementation Costs - WLANs are easy to set up, manage, change

and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.

Installation and Network Expansion - Installing a WLAN system can be fast

and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office.

Inexpensive Solution - Wireless network devices are as competitively priced

as conventional Ethernet network devices.

Scalability - WLANs can be configured in a variety of ways to meet the needs

of specific applications and installations. Configurations are easily changed and range from Peer-to-Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.

Wireless Basics (continued)

Installation Considerations

The DWL-G132 lets you access your network using a wireless connection from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

Keep the number of walls and ceilings between the DWL-G132 and

other network devices to a minimum - each wall or ceiling can reduce your DWL-G132’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

Be aware of the direct line between network devices. A wall that is 1.5

feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

Building materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. T ry to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials.

Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

Getting Started

With its default settings, the DWL-G132 will connect with other

D-Link AirPlus Xtreme G

There are basically two modes of networking:

Infrastructure – using an access point or router, such as the DI-624.

Ad-Hoc – directly connecting to another computer, for Peer-to-Peer

communication, using wireless network adapters on each computer, such as two or more DWL-G132 Wireless Network USB adapters.

On the following pages we will show you an example of an Infrastructure Network and an Ad-Hoc Network.

An Infrastructure network contains an access point or router. The Infrastructure network example shown on the following page contains the following D-Link network devices (your existing network may be comprised of other devices):

A wireless router - D-Link AirPlus Xtreme G A laptop computer with a D-Link AirPlus Xtreme GTM DWL-G132

products, right out of the box.

DI-624

A desktop computer with a D-Link AirPlus Xtreme GTM DWL-G132 A cable modem - D-Link DCM-201

Getting Started (continued)

Setting up a Wireless Infrastructure Network

DWL-G132

For a typical wireless setup at home (as shown above), please do the following:

You will need broadband Internet access (a cable or DSL-subscriber line into your home or office).

Consult with your cable or DSL provider for proper installation of the modem.

Connect the cable or DSL modem to your broadband router. (See the Quick Installation Guide included with your router.)

Install the D-Link AirPlus Xtreme G DWL-G132 Wireless USB 2.0 adapter into an available USB port on your desktop computer.

(See the Quick Installation Guide included with the DWL-G132.)

Install the D-Link AirPlus Xtreme G DWL-G132 wireless USB 2.0 adapter into an available USB port on your laptop computer.

(See the Quick Installation Guide included with the DWL-G132.)

Getting Started (continued)

Setting up a Wireless Ad-Hoc Network

DWL-G132

Wireless G USB 2.0 Adapter

Install the D-Link AirPlus Xtreme GTM DWL-G132 Wireless USB 2.0 adapter into the desktop computer. (See the Quick Installation Guide

included with the product.)

Install the D-Link AirPlus Xtreme GTM DWL-G132 Wireless USB 2.0 adapter into the laptop computer. (See the Quick Installation Guide

included with the product.)

Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP address to each computer on the Ad-Hoc network.

IP Address

When assigning IP addresses to the computers on the network, please remember that the IP address for each computer must be in the same IP address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet mask of 255.255.255.0, then the second computer can be assigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP address, one or more of the devices may not be visible on the network.

Using the Configuration Utility

D-Link AirPlus Xtreme GTM DWL-G132 uses the Configuration Utility as

the management software. The utility provides the user an easy interface to change any settings related to the wireless adapter. After you have completed the installation of the DWL-G132 (refer to the Quick Installation Guide that came with your purchase) whenever you start the computer, the Configuration Utility starts automatically and the system tray icon is loaded in the toolbar (see illustration below.*) Clicking on the utility icon will start the Configuration

Utility. Another way to start the Configuration Utility is to click on Start>Programs>D-Link AirPlus Xtreme G >D-Link AirPlus Xtreme G Utility.

If you are using Windows XP, you can use either the Zero Configuration Utility or the D-Link Configuration Utility .

T o use the D-Link Configuration Utility with XP, right-click on the wireless network icon in the taskbar in the lower right-hand corner of your computer screen.

In the window that appears, select

View Available Wireless Networks

and click the Advanced button. The screen at right will appear.

Select the Wireless Networks tab.

Uncheck the box in the properties window that enables windows configuration.

After you have done this, you can then use the D-Link Configuration Utility with XP by clicking on the D-Link Configuration Utility icon.

If the icon does not display in the taskbar , then click on this icon on your desktop to open.

*Configuration Utility icon in the system tray

Using the Configuration Utility (continued)

Link Info

Status:

Displays the MAC address of the access point or router to which the DWL-G132 is associated.

SSID:

The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default.

Frequency:

802.11b indicates that the DWL-G132 is communicating in the 2.4GHz band.

Wireless Mode:

Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting Started section in this manual for an explanation of these two modes.)

Using the Configuration Utility (continued)

Encryption:

You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.

Connection Info:

When the DWL-G132 is connected to a wireless network, Connected will be displayed in this field.

Tx Rate:

The default setting is Auto; Tx Rate settings are automatically determined for a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode).

Channel:

The default setting is Auto. The channel selection is automatically determined by the DWL-G132.

Signal Quality:

Displays the signal strength and the link quality of the DWL-G132’s wireless connection to the access point or router.

Packet Count:

Displays the statistics of the data packets that are transmitted and received.

Rescan Button:

Rescans for the strongest signal with the current SSID and associates with that access point or router.

*Maximum wireless signal rate derived from 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

Using the Configuration Utility (continued)

Configuration

SSID:

Service Set Identifier is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default.

Wireless Mode:

Click on the pull-down menu; select from the following options:

Infrastructure - connecting to the WLAN using an access point. (This is the default setting).

Ad-Hoc – wireless mode used when connecting directly to a computer equipped with a wireless adapter in a Peer-to-Peer environment.

Data Encryption:

Select Enabled or Disabled.

Using the Configuration Utility (continued)

Authentication:

IP Settings

Choose one of the following modes:

Open Authentication – the DWL-G132 is visible to all devices on the network.

Shared Authentication – allows communication only with other devices with identical WEP settings.

WPA – W i-Fi protected access improves upon WEP security. In conjunction with a RADIUS server and EAP (extensible authentication protocol), WPA ensures that only authenticated users access the network.

WPA-PSK – provides user authentication without a RADIUS server in the network. PSK (Pre-Shared Key) provides authentication through use of a passphrase that is shared by the devices on the network. This is the most secure encryption available without a RADIUS server.

Key Length:

Select the key length and either ASCII (e.g., a word) or hexadecimal format.

IEEE 802.1X:

Select Enabled or Disabled. 802.1x requires that a RADIUS server be included in your network in order to authenticate users.

Keys 1-4:

When you select WEP encryption, you will enter up to four WEP keys in the fields provided, using either Hexadecimal or ASCII format. From the keys you have entered, select the default key by clicking on the button next to it.

Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for

representing English letters as numbers from 0-127.

Authentication Config:

When you enable IEEE 802.1X click on Authentication Config. The Advanced Security Settings screen will appear . See the following p ages for more information.

IP Settings:

When you click IP Settings in the Configuration window, the pop-up screen above will appear. Configure the IP Settings in this window.

Click Apply to save changes.

Using the Configuration Utility (continued)

IP Settings

Using a Proxy Server

Check Apply with a profile proxy to use a proxy server in your network. A proxy server increases the speed of web page retrieval and can also act as a filter to limit access to specific Web sites.

Automatically detect settings:

When this option is selected, the proxy server will automatically adjust to the settings of the network.

Use automatic configuration:

Select this option and input the IP address of the proxy server to ensure that the proxy server will be utilized.

Use a proxy server:

To use a proxy server, select this option.

Bypass proxy server for local address:

Select this to allow direct access to local internal addresses without including the extra step of routing the request through the proxy server.

Proxy Settings

Using the Configuration Utility (continued)

Proxy Settings (continued)

Use the same proxy server for all protocols:

To use the same proxy server for all protocols, select this option and enter the IP address for the proxy server in the HTTP field. Other fields will be unavailable. Enter the port number for the proxy server.

HTTP, Secure, FTP, Gopher, Socks:

if you are server for all protocols, enter the proxy server address, either in IP address or domain name format and its corresponding port, for each of these protocols.

HTTP: Hyper Text Transfer Protocol

is used to transfer files from a Web server onto a browser for viewing.

not using the same proxy

Secure: HTTPS protocol is based on SSL (Secure Sockets Layer) technology.

It is a protocol for transmitting private documents over the Internet using a private key to encrypt data. URLs that begin with HTTPS often use the protocol to securely obtain confidential information such as credit card numbers.

FTP: File Transfer Protocol. FTP is most commonly used to upload and

download files on the Internet.

Gopher: Gopher is an early Internet protocol that organizes files in a

structured list for database searching.

Socks: Socks is a proxy server that provides a simple firewall. SocksV5 offers

authentication.

Exceptions: To allow specific IP addresses to bypass proxy servers, enter the

IP addresses here. Y ou can also enter “wildcards” to allow a category of website to bypass the proxy servers. For instance, if you enter www .*.com, the browser will bypass the proxy servers for most Websites.

Using the Configuration Utility (continued)

Advanced

Frequency:

Select 802.1 1b/g for compatibility with both

802.11b or 802.11g networks, or select 802.11b only .

Super G:

Selecting Super G mode enables a maximum wireless signal rate of up to 108Mbps.*

XR Mode:

Enable or Disable range extension mode. Enabling this feature allows you to increase the range of your communication without adding additional hardware.

Starting Ad Hoc Network:

When using Ad Hoc mode, select the frequency here.

Ad Hoc Channel:

Select the Ad Hoc channel when in Ad Hoc mode. When communicating in Ad Hoc mode, all devices must share the same channel.

Profile IP Settings:

You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP address information each time you connect to a network. If you select Enable you will maintain the same IP address information each time you connect to a network.

Power Mode:

Disable -This default setting consumes the most power. Enable - This setting consumes the least power.

Launch Utility on Startup:

Select Enable or Disable.

Click Apply if you have made any changes.

*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

Using the Configuration Utility (continued)

Advanced (continued)

Fragmentation Threshold:

This value should remain at its default setting of 2432. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2432. Setting the Fragmentation Threshold too low may result in poor performance.

RTS Threshold:

This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made.

Using the Configuration Utility (continued)

Available Network:

The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button.

Profile:

In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public places. Scroll up and down and highlight the profile that you wish to configure. You can Add or Remove a profile, or configure the Properties of the profile in order to connect with an available network.

Refresh:

Click on Refresh to get the most updated list of available networks.

Configure:

Highlight an existing network and click Configure; the configuration window on the next page will appear.

Site Survey

Advanced:

Highlight a network; click Advanced to and the screen on the next page will appear.

Add:

Click Add and the screen on the next page will appear.

Remove:

Highlight a network profile; click Remove to remove a network from the profile list.

Properties:

Highlight a network profile; click Properties and the screen on the next page will appear.

Connect:

Highlight a network profile; click Connect to connect to that network.

Rescan:

Click Rescan to rescan and connect to the strongest signal with the current SSID.

Using the Configuration Utility (continued)

Site Survey > Add

In this window you can select the type of network connection.

Click OK to save the changes.

If you clicked on Add, you can configure, in this window, all the properties of a profile that you wish to add to the network.

If you clicked on

Configuration or Properties you can

configure, in this window, all the properties of a profile that already exists in the network.

Advanced

Configuration, Add or Properties

If you select WPA in the

Authentication field, please see detailed instructions for configuring WP A on the following pages.

Click OK to save the changes.

Using the Configuration Utility (continued)

Authentication > WP A

Select the available network to which you

want to connect.

Click Configure.

Select WPA in the Authentication field.

Click Authentication Config.

After you click Authentication Config, the Advanced Security Settings screen will appear . Please see the following page.

Using the Configuration Utility (continued)

Authentication > WP A > Advanced Security Settings

Select the EAP type here.

Leave the User Certificate field blank.

Click Validate Server if your authentication

server requires it.

Enter the User Name.

Click Add and the window on the following

page will appear.

Click OK to save the changes.

EAP T ype: Extensible Authentication Protocols (EAP-TLS, LEAP, EAP-TTLS,

PEAP) allow devices on the network to request authentication from the RADIUS server in the network. All the devices on the network must use the same EAP type when using a RADIUS server for authentication.

User Certificate: A certificate authority (CA) issues User Certificates to

verify that a public key belongs to a specific individual or company. This field is not required here and is left blank.

Validate Server: Some RADIUS servers require that the Validate Server

field be selected. Check this field if your RADIUS server requires validation.

User Name: Enter the user name (admin) here.

Using the Configuration Utility (continued)

Authentication > WP A > Advanced Security Settings > Add

Enter the IP address of the RADIUS server in

your network.

Click OK to save the changes.

After entering the information and clicking OK in the dialog box above,the window on the previous page will appear . Click OK to complete the WP A configuration.

Authentication > WP A -PSK

Suitable for the home user, WPA-PSK (WPA Pre-Shared Key) is a superior form of security that does not require a RADIUS server in the network. To use WPA-PSK, enter a passphrase that is shared by all the devices on the network. By using TKIP (Temporal Key Integrity Protocol), the security keys change at set intervals, creating a network that is more secure than one that utilizes WEP encryption alone.

Using the Configuration Utility (continued)

Authentication > WP A-PSK

Select the available network to which you

want to connect.

Click

Configure.

WPA-PSK does

not require a RADIUS Server in the network.

Select WPA-PSK in the Authentication field.

Click Authentication Config.

Using the Configuration Utility (continued)

Authentication > WP A-PSK (continued)

Advanced Security Settings

Enter the WPA Passphrase. All the

devices on the network must share this same passphrase in order to communicate on

the network.

Click OK. The configuration is complete.

The About screen gives you the MAC address, Utility Version and the Driver Version of the DWL-G132.

About

Networking Basics

Using the Network Setup Wizard in Windows XP

In this section you will learn how to establish a network at home or work, using Microsoft Windows XP.

Note: Please refer to websites such as

and http://www.microsoft.com/windows2000 for information about networking

computers using Windows 2000/Me/98SE.

Go to Start>Control Panel>Network Connections. Select Set up a home or small office network.

http://www.homenethelp.com

When this screen appears, click Next.

Networking Basics (continued)

Please follow all the instructions in this window:

Click Next. In the following window, select the best description of your computer. If your

computer connects to the Internet through a router, select the second option as shown.

Click Next.

Networking Basics (continued)

Enter a Computer description and a Computer name (optional.)

Click Next. Enter a Workgroup name. All computers on your network should have the

same Workgroup name.

Click Next.

Networking Basics (continued)

Please wait while the Network Setup Wizard applies the changes.

When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer.

This may take a few minutes.

Networking Basics (continued)

In the window below, select the option that fit s your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next.

Insert a disk into the Floppy Disk Drive, in this case drive A.

Networking Basics (continued)

Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.

Networking Basics (continued)

Please read the information on this screen, then click Finish to complete the Network Setup Wizard.

The new settings will take effect when you restart the computer. Click Ye s to restart the computer.

You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. Af ter running the Network Setup Disk on all your computers, your new wireless network will be ready to use.

Networking Basics (continued)

Naming Your Computer

To name your computer in Windows XP, please follow these directions:

Click Start (in the lower left corner of the screen).



Right-click on My Computer.



Select Properties.



Select the Computer



Name Tab in the System Properties window.

You may enter a



Computer Description

if you wish; this field is optional.

To rename the computer



and join a domain, click Change.

Networking Basics (continued)

Naming Your Computer

In this window, enter the



Computer name. Select Workgroup and



enter the name of the Workgroup.

All computers on your



network must have the same Workgroup name.

Click OK.



Checking the IP Address in Windows XP

All wireless adapter-equipped computers in your network must be in the same IP address range (see Getting Started in this manual for a definition of IP address range.) To check on the IP address of an adapter, please do the following:



Right-click on the Local Area Connection icon in the task

bar.

Click on Status.



Networking Basics (continued)

Checking the IP Address in Windows XP

This window will appear.

Click the Support



tab.

Click Close.



Assigning a Static IP Address in Windows XP/2000

Note: Many broadband routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses.

If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions:



Go to Start.



Click on

Control Panel.

Networking Basics (continued)

Assigning a Static IP Address in Windows XP/2000

Double-click on Network



Connections.

Right-click on Local Area



Connections.

Click on Properties.



Networking Basics (continued)

Assigning a Static IP Address in Windows XP/2000

Click on Internet



Protocol (TCP/IP). Click Properties.



Input your IP address and



subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.)

Input your DNS server



addresses. (Note: If you are entering a DNS server, you must enter the IP address of the Default Gateway .)

The DNS server information will be supplied by your ISP (Internet Service Provider.)



Click OK.

Networking Basics (continued)

Checking the Wireless Connection by

Pinging in Windows XP and 2000

Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or

access point. A good wireless connection will show four replies from the wireless router or access point, as shown.

Troubleshooting

This chapter provides solutions to problems that can occur during the installation and operation of the DWL-G132. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP . If you have another operating system, these solutions will still apply although the appearance on your computer screen may differ.)

1. How do I check to see that the drivers for the DWL-G132 are installed properly?

Go to Start > My



Computer > Properties.

Select the



Hardware Tab.

Click Device



Manager.

Troubleshooting (continued)



Double-click on Network Adapters.

Right-click on



D-Link AirPlus G DWL-G132 Wireless USB Adapter.

D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter

Select Properties to



check that the drivers are installed properly .

Look under Device



Status to check that the device is working properly .

Click OK.



D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter

Troubleshooting (continued)

2. What variables may cause my wireless products to lose reception?

D-Link products let you access your network from virtually anywhere you want. However, the positioning of the product s within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products.

3. Why does my wireless connection keep dropping?

If you are using 2.4GHz cordless phones, X-10 equipment or other home



security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the channel on your router, access point and wireless adapter to a dif ferent channel to avoid interference.

Keep your product away (at least 3-6 feet) from electrical devices that



generate RF noise, like microwaves, monitors, electric motors, etc.

4. Why can’t I get a wireless connection?

If you have enabled encryption on the DWL-G132, you must also enable encryption on all wireless devices in the network in order to establish a wireless connection.

The encryption settings are: 64- or 128-bit. Make sure that the



encryption bit level is the same on the router and the DWL-G132.

Make sure that the SSID on the wireless router (if you have one in your



network) and the DWL-G132 are exactly the same. If they are not, wireless connection will not be established. The default SSID is default.

Technical Specifications

Standard

USB 2.0



IEEE 802.1 1g



Bus Type

USB 2.0



Temperature

Operating: 0ºC to 40ºC (32ºF to 104ºF)



Storing: -20ºC to 75ºC (4ºF to 167ºF)



Humidity:

80% maximum, non-condensing



Antenna Type:



Omni-directional

Modulation Technology:

Orthogonal Frequency Division Multiplexing (OFDM)



Complimentary Code Keying (CCK)



IEEE 802.1 1b



Security:

64-, 128-bit WEP



WPA - Wi-Fi Protected Access



Data Rates:

54, 48, 36,24, 18, 1 1, 9, 6 5.5, 2, 1Mbps (with Automatic Fallback)



Frequency Range:

2.4GHz to 2.462GHz



Range:

Media Access Control:

1 - Using a USB 1.1 port will adversely affect range 2 - Environmental factors may adversely affect wireless signal range

Indoors: Up to 328 feet (100 meters)



Outdoors: Up to 1,312 feet (400 meters)



CSMA/CA with ACK



Technical Specifications (continued)

Receiver Sensitivity:

54Mbps OFDM



48Mbps OFDM



36Mbps OFDM



24Mbps OFDM



18Mbps OFDM



12Mbps OFDM



1 1Mbps OFDM



9Mbps OFDM



6Mbps OFDM



5.5Mbps CCK



2Mbps QPSK



1Mbps BPSK



Transmitter Output Power:

14Bm ± 2dB



Physical Dimensions:

L = 3.3 inches



W = 2.1 inches



H = 0.2 inches



Weight:

0.021 lb. (4.4g)



Certifications:

FCC part 15b



Warranty:

1 year



D-Link AirPlusTM G products can transfer data up to 5 times faster than standard 802.1 1b networks. They are also interoperable with 802.1 1b compliant wireless devices.

T echnical Support

Y ou can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United St ates and

within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our

website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465 24 hours a day, seven days a week.

D-Link Technical Support over the Internet:

http://support.dlink.com email:support@dlink.com

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265 Monday to Friday 7:30am to 12:00am EST

D-Link Technical Support over the Internet:

http://support.dlink.ca email:support@dlink.ca

Warranty and Registration

(USA only)

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from:

• D-Link or its authorized reseller or distributor and

• Products purchased and delivered within the fifty states of the United States, the District of

Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.

Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below applicable to the product type (“Warranty Period”), except as otherwise stated herein.

1-Year Limited Warranty for the Product(s) is defined as follows:

• Hardware (excluding power supplies and fans) One (1) Year

• Power Supplies and Fans One (1) Year

• Spare parts and spare kits Ninety (90) days

D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.

Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Link’s sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the Software or to refund at D-Link’s sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the nonconforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.

Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.

Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same.

• The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.

• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.

• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request.

• Return Merchandise Ship-To Address

USA: 17595 Mt. Herrmann St., Fountain Valley, CA 92708 Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailed

warranty information within Canada)

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.

What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than DLink; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty.

Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY W ARRANTY OF ANY KIND WHA TSOEVER INCLUDING, WITHOUT LIMIT A TION, ANY W ARRANTY OF MERCHANT ABILITY , FITNESS FOR A P ARTICULAR PURPOSE AND NON-INFRINGEMENT . IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURA TION OF SUCH IMPLIED W ARRANTY SHALL BE LIMITED TO NINETY (90) DA YS. EXCEPT AS EXPRESSL Y COVERED UNDER THE LIMITED W ARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY , SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT . Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT , NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUIT ABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT , WORK STOPP AGE, COMPUTER FAILURE OR MALFUNCTION, F AILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH DLINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMA TION OR DA TA CONT AINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SER VICE) RESULTING

FROM THE USE OF THE PRODUCT, RELATING T O WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED W ARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT . THE MAXIMUM

LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT

The equipment version marketed in US is restricted to usage of the channels 1- 11 only.  For a detailed warranty outside the United States, please contact the corresponding local D-Link office.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.  End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

COVERED BY THE W ARRANTY . THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.

Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state.

Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered

trademarks are the property of their respective manufacturers or owners.

Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior

interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment; such modifications could void the user’s authority to operate the equipment.

IMPORTANT NOTE: FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located and must not operate in conjunction with any other antenna or transmitter.

For a detailed warranty outside the United States, please contact the corresponding local D-Link office.

(09/23/2004)

D Link DWLG132A1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Package Contents

Introduction

Features and Benefits

Wireless Basics

Getting Started

Using the Configuration Utility

Networking Basics

Troubleshooting

Technical Specifications

T echnical Support

Warranty and Registration