DWL-AG700AP Install Guide
DWL-AG700AP Install Guide
DWL-AG132 Install Guide
Contacting Technical Support
System Requirements
System Requirements
Minimum System Requirements:
an
Computers with Windows XP/2000 operating system with
available USB 2.0 port
version 7.0 and above
Internet Explorer version 6.0 or Netscape Navigator
Package Contents
D-Link AirPremier AG DWL-AG132
Wireless AG USB 2.0 Adapter
Cradle
Manual on CD
D-Link Systems, Inc. 2
Connecting to your networkDWL-AG132 Install Guide
DWL-AG132 Install GuideInstalling the Drivers
DWL-AG700AP Install Guide
Installing the Drivers
Installing the Drivers
Do NOT install the DWL-AG132 Wireless AG USB Adapter into your
computer before installing the driver software from the D-Link CD!
The step-by-step instructions that follow are shown in Windows XP. The
steps and screens are similar for the other Windows operating systems.
Turn on the computer and insert the D-Link AirPremier AG®
DWL-AG132 Driver CD in the CD-ROM drive. The installation Wizard will
automatically appear.
Click Install Drivers
If the Installation Wizard does not
automatically start on your computer,
type “D:\Drivers\setup.exe.” If the
Wizard does start, proceed to the next
screen.
3
Click Next
Click Next
D-Link Systems, Inc.
DWL-AG132 Install GuideInstalling the Drivers
DWL-AG700APUsing the Setup Wizard
Installing
Click Next
Click ‘Yes, I want to restart
my computer now.’
Click Finish
the Drivers (continued)
You have completed the installation of the drivers!
D-Link Systems, Inc.
4
DWL-AG132 Install GuideConnecting the DWL-AG132
Connecting the DWL-AG132
Link/Power LED
Link - indicates that
the DWL-AG132 is
properly installed.
A c t i vi ty - b l i n ks
when data is being
USB Port - used to
co nnect the D WLA G 1 3 2 t o y o ur
computer.
Remove the protective covering from the DWL-AG132.
transmitted through the
wireless connection.
Begin by pressing
down on the cover
with your thumb.
Insert the DWL-AG132 into
an available USB port on
your computer.
Optional: If desired or needed, attach
the cradle between the DWL-AG132
and your computer.
Pull the cover away from
the DWL-AG132.
D-Link Systems, Inc.5
DWL-AG132 Install GuideThe Found New Hardware Wizard
DWL-AG700APUsing the Setup Wizard
The Found New Hardware Wizard
After connecting the DWL-AG132, the Found New Hardware Wizard
(Windows XP) screen will appear:
Select Install the
software automatically
(Recommended).
Click Next
Click Continue Anyway.
D-Link Systems, Inc.
6