D-Link DWL-7620AP User Manual
Product Highlights
Next Generation Connectivity
Features next-generation 802.11ac Wave 2
technology to deliver a reliable wireless connection
at unparalleled combined speeds
Unparalleled Performance
Experience smooth and stable performance with a
powerful CPU, band steering, and Airtime Fairness to
ensure that every client has equal access to air time
Optimised Wireless Experience
MU-MIMO and tri-band technology provide optimal
wireless experience in high-density environments
DWL-7620AP
Wireless AC2200 Wave 2 Tri-Band Unied Access Point
Features
Ideal for Businesses
• Multiple virtual access points can be created
from a single access point
• Flexible QoS with WMM
• Power over Ethernet enables installation in hard
to reach locations
• UL2043-certied chassis (Plenum-rated)
High-Performance Connectivity
• Band steering for ecient trac management
• Airtime Fairness
• 802.11k Fast Roaming
• Supports Link Aggregation
Trusted Wireless Security Features
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• MAC address ltering
• Rogue AP detection
1
2
The Wireless AC2200 Wave 2 Tri-Band Unied Access Point is specially designed for small
to medium businesses or enterprises, providing unparalleled bandwidth and exibility for
administrators looking to deploy a medium to large scale Wi-Fi network. It can operate as a
standalone access point as well as be centrally managed by D-Link’s Unied Wireless Controllers.
The DWL-7620AP can be ceiling mounted or wall mounted to provide the best wireless coverage.
For additional exibility, it comes with integrated Power over Ethernet (PoE) support, allowing the
access point to be installed in areas where power outlets are not readily available.
Greater Speed and Connectivity
The DWL-7620AP leverages the full potential of 802.11ac Wave 2 to provide unparalleled
connectivity with ultra-high combined data rates. It delivers combined wireless speeds of up
to 2,200 Mbps3 over 3 wireless bands and supports wired link aggregation2. This allows two
Gigabit Ethernet ports to be linked together and act as a single port to double the available
bandwidth and maximise the overall throughput of the access point.
MU-MIMO Technology
With support for MU-MIMO (Multi-User Multiple Input Multiple Output), the DWL-7620AP
simultaneously communicate with multiple clients using multiple antennas. This allows the
access point to utilise the spectrum more eciently and signicantly increase the network
capacity. The 2 x 2 MU-MIMO takes full advantage of all streams to serve more wireless clients
to dramatically improve wireless performance.
Tri-Band Wi-Fi
The DWL-7620AP is equipped with tri-band wireless technology featuring one 2.4 GHz and
two 5 GHz wireless bands to accommodate the increasing number of devices connecting to a
single access point. By allowing older 802.11b/g/n devices to connect to the 2.4 GHz, the two 5
GHz bands can be dedicated to newer, faster wireless AC devices to enjoy seamless bandwidth-
intensive applications such as HD video streaming, VoIP and le sharing.
Wireless AC2200 Wave 2 Tri-Band Unied Access Point
Thanks to intelligent band steering technology, the DWL-7620AP can also
eciently load balance the clients and trac between the three wireless
bands to ensure all wireless clients have a better user experience high density
environment.
Centrally Managed
When working in conjunction with D-Link Unied Wireless Controllers,
multiple units of DWL-7620AP can be centrally managed. This allows for
a large number of access points to be deployed and managed easily and
eciently. Once the access points are discovered by the controller, the
administrator can push the conguration to them as a group, instead of
conguring each access point individually. Additionally, Radio Frequency (RF)
resource management1 allows wireless coverage to be managed centrally,
providing the best coverage possible for wireless clients.
Automatic Radio Frequency (RF) Management
When access points are deployed in close proximity to each other, there may
be interference between channels if RF management is not implemented.
When the DWL-7620AP senses a neighbour nearby, it will automatically select
a non-interfering channel. This greatly reduces RF interference and will allow
the administrator to deploy access points more densely. To further minimise
interference, when a nearby AP is on the same channel, the DWL-7620AP will
automatically lower its transmission power1. If the nearby access point fails,
then this access point will increase its transmission power to expand coverage.
Advanced Wireless Features
The DWL-7620AP support 802.1p Quality of Service (QoS) for enhanced
throughput and better performance of time-sensitive trac like VoIP and
streaming DSCP. It also supports Wi-Fi Multimedia (WMM), so in the event
of network congestion, time-sensitive trac can be given priority ahead
of other trac. Furthermore, when a number of access points are in close
proximity to each other, an access point will refuse new association requests
once its resources are fully utilised, allowing the association request to be
picked up by a neighbouring unit, distributing the load over multiple APs.
Band steering technology enables it to intelligently place clients on the
optimal wireless band to avoid congestion and allows for smooth streaming
of video, seamless browsing, and fast downloads for mobile devices. Airtime
Fairness ensures that equal airtime is given to each client, providing increased
performance even if slower devices are connected. 802.11k Fast Roaming1 is
also supported, which allows the wireless client to roam seamlessly between
access points.
If the worst should happen to your network you need the very best
support and fast. Downtime costs your business money. D-Link
Assist maximises your uptime by solving technical problems
quickly and eectively. Our highly trained technicians are on
standby around the clock, ensuring that award-winning support
is only a phone call away.
With a choice of three aordable service oerings covering all
D-Link business products, you can select the package that suits
you best:
D-Link Assist Gold - for comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical environments
where maximum uptime is a high priority. It guarantees four hour
around-the-clock response. Cover applies 24/7 for every day of the
year including holidays.
D-Link Assist Silver - for prompt same-day assistance
D-Link Assist Silver is designed for ‘high availability’ businesses that
require rapid response within regular working hours. It provides a
four hour response service Monday to Friday from 8am to 5pm,
excluding holidays.
D-Link Assist Bronze - for guaranteed response on the
next business day
D-Link Assist Bronze is a highly cost-eective support solution for
less critical environments. Response is guaranteed within eight
business hours Monday to Friday from 8am to 5pm, excluding
holidays.
D-Link Assist can be purchased together with any D-Link business
product. So whether you’re buying switching, wireless, storage,
security or IP Surveillance equipment from D-Link, your peace
of mind is guaranteed. D-Link Assist also oers installation and
conguration services to get your new hardware working quickly
and correctly.
Loading...