| 1
CONTENTS
Introduction
D-Link Industrial Switches
Deployment Scenarios
• Smart Transportation
• Smart Factory/Smart Warehouse
• Smart Campus/City
End-To-End Industrial Networking
• DIS-100E
• DIS-100G (Industrial Gigabit Unmanaged Switches)
• DIS-200G (Industrial Gigabit Smart Managed Switches)
(Industrial Fast Ethernet Unmanaged Switches)
03
07
08
16
17
18
19
• DIS-300G (Industrial Gigabit Managed Switches)
• DIS-700G (Industrial Layer 2+ Gigabit Managed Switch)
• DIS-M100G-SW (Industrial 10/100/1000Base-T to SFP Media Converter)
• DIS-S (Industrial optical SFP transceivers)
• DWM-312/312W (4G LTE M2M Router)
• D-ECS (D-Link Edge Cloud Solution)
• DIS-H/N (Industrial DIN rail power supplies)
Why D-Link
20
21
21
22
23
23
23
Industrial Switches Brochure2 |
Introduction
An Introduction to Industrial
Ethernet Switches
What Are Ethernet Switches?
Ethernet Switches are used all over the world. They are primary linchpins for sending and
receiving information on telecom, enterprise, and office networks. They send and receive
data from devices such as PCs, Servers, Wi-Fi Access Points, Surveillance Cameras, and
other Ethernet Switches. Usually, they are deployed in buildings or climate-controlled
spaces. They use copper or fibre-optic cabling as their transmission medium.
What Are D-Link Industrial Ethernet Switches?
D-Link Industrial Ethernet Switches have primarily the same necessary technological
capabilities as standard Ethernet switches, but they’re built to higher standards in terms
of connection reliability (enabled a backup power supply) and redundancy (through our
Rapid-Recovery Ring architecture) than standard Ethernet switches, while also being
ruggedised for deployment in harsher environments, such as those often encountered
around industrial facilities, or in situations that are not climate controlled, such as outdoor
cabinets.
Introduction
What Makes Them Special?
Toughness
D-Link Industrial Ethernet Switches are built
to tolerate harsher conditions than most
standard switches in terms of temperature,
dust, lightning strike, vibration, corrosion,
electromagnetic interference, and even
impact (so it can withstand a fall from a
potential failed mounting).
Convenience
The abovementioned tolerances mean that
special climate-controlled spaces don’t need
to be built or in-place to house these
Toughness Convenience
Reliability
Redundancy
Reliability/Redundancy
Ethernet networking enables a higher degree
of redundancy than older proprietary
Industrial standards allow. Standard Ethernet
switches employ Ethernet Ring Protection
Switching (ERPS) architecture for redundant
failover, which can re-route network
transmission in the event of a failure in 50
milliseconds. This is adequate in most
standard cases because the most demanding
applications that most enterprise and
telecom networks are likely to carry is live
video streaming, where 50ms is the human
switches. They can be installed in areas that
industrial facilities are likely to already have,
such as electrical closets, and mounted onto
common local architectural elements, such
as wall railings. And what’s more, with
Power-over-Ethernet (PoE) capabilities
enabled on specific models, these switches
can be used to power other devices such
as cameras, VoIP phones, and Wi-Fi Access
Points, facilitating their deployment in areas
where they might lack access to a standard
wall socket.
perception threshold for noticing a “hiccup”
on a live transmission.
Industrial Switches Brochure4 |
However, there are a growing number of
devices and equipment, and in re-arranging
applications that an Ethernet switch might
be asked to carry, either now or in the
near future, that would demand faster
failover – precision manufacturing, train
routing, drone/robotic control, augmented
reality, and any other application where lagtime might be problematic or dangerous.
And D-Link’s Rapid-Recovery Ring
architecture can reduce this latency by 60%
while increasing the redundancy potential
by more than tenfold.
What Else Can They Do?
Standard industrial communication has
historically used proprietary analogue
standards and equipment, which are often
connected topology of what you already
have. Industrial Ethernet also enables you
to unify the network you are using for your
factory-floor with the standard Ethernet
network that you’re already for Wi-Fi
coverage and other office functions, making
for a single infrastructure that is inherently
easier to maintain and repair moving forward,
while also better enabling the integration of
the data you are collecting from your Internet
of Things (IoT) devices on the factory floor
with the analytics capabilities you have in
your office.
quite slow by modern standards, and don’t
scale very well. Industrial Ethernet gives you
more flexibility in terms of adding new
| 5
Questions You Might Have
Is it Future-Proof?
Ethernet is the world’s dominant
networking technology, and this is not
likely to change for the foreseeable
future. And what’s more, most current
Industrial Ethernet applications are not
bandwidth-intensive and use only a
fraction of what Ethernet technology is
capable of, and this is also not likely to
change. In other words, an Industrial
Ethernet switch bought today will still
likely be in use tomorrow, and perhaps
even in use in 20 years.
desire. There is a no better or easier option
for securing your industrial network
available today than Ethernet.
What about Wi-Fi for IoT?
The proliferation of IoT sensors has given
the old 802.11n Wi-Fi standard new life,
thanks to its meagre equipment costs and
low power consumption. It’s a tried and
tested technology well-suited for lowbitrate data transmission that isn’t timesensitive, which is common in IoT scenarios.
If a higher bitrate IoT connection is needed,
the new Wi-Fi 6 standard (802.11ax) is now
Is it Secure?
With all the news about prominent data
breaches, one might be tempted to think
of Ethernet as an insecure technology.
But the fact is that many legacy industrial
communications systems and standards
have already been compromised (many
were created before cyber crime was a
concern), and it is inherently easier to
secure a system from the ground up
than it is retroactively. Industrial Ethernet
systems can also be encrypted, and
isolated from the rest of your
infrastructure, and can have additional
layers of security added if you so
available. It was designed with IoT in mind
and can handle a much higher density of
connected IoT devices than previous
generations, while also providing stronger
security and backwards-compatibility with
older Wi-Fi standards.
And if you’re seeking wireless robotic
control, Private 4G/LTE is the way to go. It
features the kind of ultra-low latency,
reduced interference, and enhanced
security you want in a robotics application
while laying the groundwork for potential
Push-to-Talk (PTT) unification (using
consumer-grade smartphones) down
the road.
Industrial Switches Brochure6 |
D-Link Industrial Switches
D-LINK Industrial Switches
D-Link Industrial Switches are more than
just electronic hardware, they’re vital
infrastructure. Rugged, reliable, easy-todeploy, and fast-to-recover, our DIS-series
encompasses Fully Managed, Smart
Managed, and Unmanaged solutions, all
certified against vibration, shock and
free-fall. With their highly-durable IP30-rated
metal casing, and high electromagnetic
compatibility (EMC) and temperature
tolerances, the DIS series is ready to serve,
and built to last.
Extreme Heat and Cold Tolerance
Our DIS switches handle extreme temperature
fluctuations and can cold-start at extreme
lows.
*Check product documentation for details on operating
temperature.
Key Features
• Rapid Failover (20ms).
• IP-30 Ingress Protection.
• Wide Operational Temp: -40°to 75°C
• Redundant dual power inputs.
•
Certified for Vibration, Shock, and Freefall.
• Compliant with UL, CE, and FCC.
• Power-over-Ethernet (PoE) support.
•
Diverse mounting options (DIN Rail,
Wallmount, Rackmount)
•
5-year warranty, 10-year replacement &
components
| 7
Deployment Scenarios
Key Scenarios
Industrial Automation
Rapid-Recovery Ring architecture enables sub-20ms mission-critical failover suitable for
precision manufacturing.
Smart Campus/City Surveillance
Ample bandwidth for 4K/8K video streaming,
while temperature and moisture tolerances
enable deployments in outdoor cabinets, and
PoE support simplifies the wiring for both
switches and cameras.
Smart Warehouse
Versatile mounting options, Power-overEthernet (PoE) capabilities, and dust, impact,
and vibration tolerances make these switches
suitable for remote deployment in warehouses
and other remote logistics sites, while RapidRecovery Ring ensures continuous operation.
Smart Transportation
Versatile and capable enough to handle a
variety of duties in roadside, motorway, transit
hub and railway scenarios.
Smart Parking
Sufficient reliability and bandwidth for all the
functions necessary to automate a parking
lot, including License Plate Identification,
Electronic Payment, Gate Operation, driver
guidance, and more.
Industrial Switches Brochure8 |
SMART Transportation
D-Link Industrial Switches have the speed
you need to keep things moving, and the
reliability that lives can depend on.
Smart Railways
Key Requirements
• Real-time transmission, scheduling,
and updating of safety information
such as train speed, train location, and
track integrity. Reliability &
redundancy.
• Reliability, redundancy, and seamless
connectivity.
• An intuitive open platform that can
manage large amounts of data from
wayside sensors and stations.
• Robust surge protection (6kV).
• Rugged and reliable design (IP30
rated) suitable for wayside cabinets,
where it can withstand extreme
temperature, vibration, and
electromagnetic interference (EMI).
• NEMA-TS2 & EN50121-4 compliance.
Additional Scenarios
• Electronic Toll Collection (ETC)
• Fare Collection
• Traffic Monitoring
D-Link Benefits
• Quick & reliable intrastation connection
& long-distance transmission.
• Electrical backup via dual power input.
Electronic Toll Collection Fare Collection
| 9
Deployment Scenarios
Smart Railways
Wayside Cabinet
DIS-700G-28XS
(Industrial Layer 2+ Gigabit Managed Switches)
• Quick & reliable intrastation connection &
long-distance transmission.
• Electrical backup via dual power input.
• Robust surge protection (6kV)
• Rugged and reliable design (IP30 rated) suitable for wayside
cabinets, where it can withstand extreme temperature, vibration,
and electromagnetic interference (EMI).
DIS-700G-28XS
Industrial Switches Brochure10 |
Smart Railways
AlarmSystem
Surveillance Camera
DIS-300G
Wireless AP
DIS-300G Series
(Layer 2 Gigabit Industrial Smart Managed Switches)
• A wide variety of port options offers the flexibility to choose the
best switch for the situation, including PoE options
• High redundancy features to provide industrial-grade reliability:
Dual power inputs, Ring Protection with <20ms
• Resistant to temperatures between -40 and 75°C
• Power external devices with Power over Ethernet (IEEE 802.3af/
at) for simpler installations
• Shock and vibration resistance further boost resilience to
outside conditions
• IP30-rated ingress protection provides defense against small
objects entering the switch
| 11
Deployment Scenarios
Smart Factory/Smart Warehouse
D-Link Industrial Switches have the
capabilities to transform and automate
your operations from production
to shipping.
Key Requirements
• Low CAPEX & OPEX so that resources
can be devoted to transformation.
Reliability, redundancy, and seamless
connectivity.
• Minimal cabling and need for
auxiliary resources.
• Uninterrupted operations and
modest maintenance.
D-Link Benefits
• Robust environmental tolerances of
• PoE capabilities that minimize
installation hassle.
• Smart power failure alarm enables
crisis management.
dust, vibration, and EMI.Electrical
backup via dual power input.
• Ultra-rapid redundant failover (<20ms).
• Dual power input enables back without
re-cabling or reconstruction.
Factory Office Factory Automation
Industrial Switches Brochure12 |
| 13
Deployment Scenarios
Smart Campus/City
Smart Surveillance/Smart
Parking
Key Requirements
• Easy integration with legacy
infrastructure.
• Robust scalability, compatibility with
diverse terminal devices, and futurereadiness for Cloud, AI, 4K, and other
cutting-edge technologies.
• Tolerances for moisture and extreme
temperature.
D-Link Benefits
• Comprehensive portfolio of innovative,
rugged, reliable & scalable solutions.
Smart Parking Features
• License-Plate Recognition
• Gate Automation
• Object Tracking
• Remote Recording
• Driver Guidance
• High efficiency and minimal
maintenance thanks to remote
monitoring.
• Rapid deployment capabilities.
• Dual-power input for continuous
operation.
• Auto-surveillance VLAN capability.
License-Plate Recognition Gate Automation
Industrial Switches Brochure14 |
Smart Surveillance/Smart Parking
DIS-300G
DIS-100G
Wireless AP
License Plate Recognition
DIS-200G
DIS-100G
DIS-100G Series
(Gigabit Industrial Unmanaged Switches)
• Available in PoE and non-PoE models
• SFP port for long distance connections
• Plug-and-Play installation
• Fanless, passive cooling design
• Wide operating temperature (-40 ~ 75 °C)
• High EMC endurance
• Durable IP30-rated housing
• Dual power input for redundant power supplies
| 15
End-To-End Industrial Networking
D-Link Solutions
Model Description Environmental EMC Traffic Rail
EN 61000-4-2 ESD
EN 61000-4-3 RS
EN 61000-4-4 EFT
EN 61000-4-5
EN 61000-4-6 CS
EN 61000-4-8
NEMA-TS2 EN50121-4
Certified
(excl. DIS-100G-6S/10S)
DIS-100E Series
DIS-100G Series
DIS-200G Series
DIS-300G Series
DIS-700G
16 |
Vibration: IEC60068-2-6
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Industrial Fast Ethernet
Unmanaged Switches
Industrial Gigabit
Unmanaged Switches
Industrial Gigabit
Smart Managed Switches
Industrial Gigabit
Managed Switches
Industrial Layer 2+
Gigabit Managed Switch
Industrial Switches Brochure
Certified Certified
Certified Certified
Compliant Certified
Certified Certified Certified Compliant
Certified Certified
Compliant
(excl. DIS-100G-6S/10S)
DIS-100E Series
(Industrial Fast Ethernet Unmanaged Switches)
General DIS-100E-5W DIS-100E-8W
Number of Ports 5 x 10/100BASE-T ports 8 x 10/100BASE-T ports
Performance
Switching Capacity 1 Gbps 1.6 Gbps
Maximum Forwarding Rate 0.744 Mpps 1.19 Mpps
MAC Address Table Size Up to 1K entries
Physical
Power Input 12 to 58 V DC terminal block dual input 12 to 58 V DC terminal block dual input
Power Consumptions
Heat Dissipation 5.323 BTU/hr 5.596 BTU/hr
Weight 0.32 kg 0.405 kg
Dimensions 109.2 x 29.1 x 89.4 mm 117.8 x 39 x 96.9 mm
Ventilation Fanless, passive cooling
Operating Temperature -40 to 75 °C
Storage Temperature -40 to 85 °C
Material IP30-rated metal casing
Installation DIN rail/wall-mountable
Vibration, Shock & Freefall Vibration: IEC60068-2-6; Shock: IEC60068-2-27; Free Fall: IEC60068-2-32
Certification Compliance UL 60950-1, CE, FCC
Electrical safety CSA C22, CE
EMC FCC Part 15, CISPR 22 (EN55022) Class A, EN 61000-4-2, -3, -4, -5, -6 (Level 3)
RoHS & WEEE RoHS (Pb free) and WEEE compliant
Maximum: 1.56 W
Minimum: 0.95 W
Maximum: 1.64 W
Minimum: 1.41 W
| 17
End-To-End Industrial Networking
DIS-100G Series
(Industrial Gigabit Unmanaged Switches)
Model DIS-100G-5W DIS-100G-5SW DIS-100G-5PSW DIS-100G-6S DIS-100G-10S
Number of Ports
Performance
Switching Capacity 10 Gbps 10 Gbps 10 Gbps 12 Gbps 20 Gbps
Maximum Forwarding Rate 7.44 Mpps 7.44 Mpps 7.44 Mpps 8.928 Mpps 14.88 Mpps
Advanced Features
PoE
PoE Standards – – IEEE 802.3af/at – –
PoE Capable Ports – – Ports 1 to 4 – –
PoE Power Budget – – Max. 120 W – –
Physical
Power Input
Power Consumptions Maximum: 3.18 W Maximum: 3.82 W
Heat Dissipation 10.85 BTU/hr 13.03 BTU/hr
Weight 0.32 kg 0.32 kg 0.50 kg 0.4458 kg 0.4977 kg
Dimensions 112.2 x 29.1 x 89.4 mm 112.2 x 29.1 x 89.4 mm 139 x 29 x 107 mm 162 x 102 x 28 mm 190 x 100 x 28 mm
Material IP30-rated metal casing IP40-rated metal casing
Operating Temperature -40 to 75 °C -20 to 65 °C
Storage Temperature -40 to 85 °C -40 to 85 °C
Installation DIN rail/wall-mountable
Vibration, Shock & Freefall Vibration: IEC60068-2-6; Shock: IEC60068-2-27; Free Fall: IEC60068-2-32
Certifications UL/CE/FCC, NEMA-TS2, EN50121-4 compliant CE/FCC
Safety UL 60950-1
EMI / EMC / EMS
RoHS & WEEE RoHS (Pb free) and WEEE compliant
5 x 10/100/1000BASE-T
ports
IEEE 802.1p Quality of Service (QoS) - 4 hardware queues per port
12 to 58 V DC terminal
block dual input
4 x 10/100/1000BASE-T
ports
1 x SFP port
Broadcast/Multicast/Unicast Storm Control
12 to 58 V DC terminal
block dual input
47 CFR FCC Part 15 Subpart B (Class A), ICES-003 Issue 6 (Class A)
EN 61000-6-2, EN 61000-6-4, EN 61000-4-2, -3, -4, -5, -6 (Level 3)
4 x 10/100/1000BASE-T
PoE ports
1 x SFP ports
48 to 58 V DC terminal
block dual input
Maximum: 4.46 W
(PoE off)
Maximum: 131.57 W
(PoE on)
15.22 BTU/hr (PoE off)
448.94 BTU/hr (PoE on)
UL61010-1, UL61010-
2-201, UL C1D2
4 x 10/100/1000BASE-T
ports
2 x SFP port
IEEE 802.1p Quality of Service (QoS) - 8 hardware
queues per port
12 to 48 V DC terminal
block dual input
Maximum: 4.82 W Maximum: 7.44 W
16.44 BTU/hr 25.37 BTU/hr
8 x 10/100/1000BASE-T
ports
2 x SFP port
12 to 48 V DC terminal
block dual input
–
18 |
Industrial Switches Brochure
DIS-200G Series
(Industrial Gigabit Smart Managed Switches)
Model DIS-200G-12S DIS-200G-12PS
10 x 10/100/1000BASE-T ports
Number of Ports
Performance
Switching Capacity 24 Gbps
Maximum Forwarding Rate 17.85 Mpps
PoE
PoE Standards – IEEE 802.3af/at
PoE Capable Ports – Ports 1 to 8
PoE Power Budget – Max. 240 W
Features Highlights
Enhanced VLAN Auto Surveillance VLAN
Rapid-Recovery Ring ERPS 50-200ms Ring Protection, 16-Node Capacity, 1,200 km Range
Centralised Management
Physical
Power Input
Power Consumptions
Heat Dissipation 35.01 BTU/hr
Dimensions 210 x 171.2 x 53 mm
Ventilation Fanless
Material IP30-rated metal casing
Operating Temperature -40 to 65 °C -40 to 65 °C
Storage Temperature -40 to 85 °C
Installation DIN rail/wall/rack mountable
Certifications • CE, FCC, BSMI
Safety • UL60950-1
EMI • CISPR 22, FCC Part 15B Class A
EMS • EN 61000-4-2 ESD, EN 61000-4-3 RS, EN 61000-4-4 EFT, EN 61000-4-5, EN 61000-4-6 CS, EN 61000-4-8
Compliant with Environmental Tests • IEC 60068-2-27 Shock, IEC 60068-2-32 Freefall, IEC 60068-2-6 Vibration
12 to 48 V DC terminal block dual input
2 x SFP ports
1 x RJ-45 Console port
D-Link Network Assistant Software for Windows 7/8/10, Chrome extension or Android/iOS app
D-View 7Network Management Software
12 V DC 4-pin DIN single power input
Maximum: 10.26 W
Standby: 5.94 W
8 x 10/100/1000BASE-T PoE ports
2 x 10/100/1000BASE-T ports
2 x SFP ports
1 x RJ-45 Console port
48 to 54 V DC terminal block dual input
54 V DC 4-pin DIN single power input
Maximum: 260 W (PoE on)
Maximum: 10.8 W (PoE off)
Standby: 7.02 W
887.16 BTU/hr (PoE on)
36.85 BTU/hr (PoE off)
| 19
End-To-End Industrial Networking
DIS-300G Series
(Industrial Gigabit Managed Switches)
General DIS-300G-12SW DIS-300G-8PSW DIS-300G-14PSW
8 x 10/100/1000BASE-T ports
Number of Ports
Performance
Switching Capacity 24 Gbps 16 Gbps 28 Gbps
Maximum Forwarding Rate 17.85 Mpps 11.9 Mpps 20.83 Mpps
MAC Address Table Size Up to 8K entries
Transmission Method Store-and-forward
PoE
PoE Standards N/A IEEE 802.3af/at IEEE 802.3af/at
PoE Capable Ports N/A Ports 1 to 4 Ports 1 to 8
PoE Power Budget N/A Max. 120 W Max. 240 W
Features Highlights
Rapid-Recovery Ring <20ms Recovery, 250-Node Capacity, Near-Unlimited Range
Centralised Management D-View 7Network Management Software
Physical
Power Input 12 to 58 V DC terminal block dual input
Power Consumptions Maximum: 17 W
Heat Dissipation 58 BTU/hr
Weight 1.09 kg 1.31 kg 1.41 kg
Dimensions 61 x 154 x 109 mm 77 x 154 x 128 mm 77 x 154 x 128 mm
Ventilation Fanless
Operating Temperature -40 to 75 °C -40 to 75 °C -40 to 75 °C
Storage Temperature -40 to 85 °C
Operating Humidity 5% to 95% RH, non-condensing
Storage Humidity 5% to 95% RH, non-condensing
Material IP30-rated metal casing
Installation DIN rail/wall mountable
Vibration, Shock & Freefall Vibration: IEC60068-2-6; Shock: IEC60068-2-27; Free Fall: IEC60068-2-32
Certification Compliance UL 60950-1, CE, FCC, NEMA-TS2
EMC FCC Part 15, EN 61000-6-2, EN 61000-6-4, EN 61000-4-2, -3, -4, -5, -6
RoHS & WEEE RoHS (Pb free) and WEEE compliant
4 x SFP ports
1 x RJ-45 Console port
4 x 10/100/1000BASE-T PoE ports
2 x 10/100/1000BASE-T ports
2 x SFP ports
1 x RJ-45 Console port
54-58 V DC (802.3at PoE+)
48-58 V DC (802.3af PoE)
12-48 V DC (non-PoE)
Max. 14 W without PD connected
Max. 145 W with 120 W PSE power
delivered
494.76 BTU/hr (PoE on)
47.77 BTU/hr (PoE off)
8 x 10/100/1000BASE-T PoE ports
2 x 10/100/1000BASE-T ports
4 x SFP ports
1 x RJ-45 Console port
54-58 V DC (802.3at PoE+)
48-58 V DC (802.3af PoE)
12-48 V DC (non-PoE)
Max. 14 W without PD connected
Max. 265 W with 240 W PSE power
delivered
904.22 BTU/hr (PoE on)
47.77 BTU/hr (PoE off)
20 |
Industrial Switches Brochure
DIS-700G Series
(Industrial Layer 2+ Gigabit Managed Switch)
DIR-M100G-SW
(Industrial 10/100/1000Base-T to SFP Media Converter)
General DIS-700G-28XS
24 x SFP ports
Number of Ports
Performance
Switching Capacity 128 Gbps
Maximum Forwarding Rate 95.2 Mpps
MAC Address Table Size Up to 8K entries
Transmission Method Store-and-forward
Features Highlight
Rapid-Recovery Ring
Physical
Power Input Dual 20-57 V DC
Power Consumptions Maximum: 35 W
Alarm Relay 2 A at 24 V
Heat Dissipation 119.42 BTU/hr
Weight 4.5 kg
Dimensions 440 x 44 x 318.5 mm
Ventilation Fanless
Operating Temperature -40 to 75 °C
Storage Temperature -40 to 85 °C
Operating Humidity 5% to 95% RH, non-condensing
Storage Humidity 5% to 95% RH, non-condensing
Material IP30-rated metal casing
Installation Rack mountable
Vibration, Shock & Freefall
Certification Compliance UL 61010-1 compliance, CE, FCC, EN 61000-6-2, EN 61000-6-4
EMI
EMS
RoHS & WEEE RoHS (Pb free) and WEEE compliant
<20ms Recovery, 250-Node Capacity, Near-Unlimited
Radiated Emission: CISPR 22, EN55022 Class A
4 x SFP+ ports
1 x RJ-45 Console port
Range
Vibration: IEC60068-2-6; Shock: IEC60068-
2-27; Free Fall: IEC60068-2-32
Conducted Emission: EN55022 Class A
ESD: IEC61000-4-2
Radiated RF (RS): IEC61000-4-3
EFT: IEC61000-4-4
Surge: IEC61000-4-5
Conducted RF (CS): IEC61000-4-6
Model
Number of Ports
Port Functions
Media Interface
Exchange
Performance
Switching Capacity • 4 Gbps
Max. Forwarding Rate • 1000 M: 2.976 Mpps
Forwarding Mode • Store-and-Forward
Physical
Power Input • 12 to 48 VDC terminal block dual input
Power Consumption • 3.6 W
Heat Dissipation • 12.28 BTU/h
Weight • 190 g
Dimensions • 26.1 x 70 x 95 mm
MTBF • >25 years
Operating Temperature • -40 to 70 °C
Storage Temperature • -40 to 85 °C (
Operating Humidity • 5% to 95% RH, non-condensing
Storage Humidity • 5% to 95% RH, non-condensing
Emission (EMI) & Safety Certifications
EMI • CE class A, FCC class A
Safety • LVD (EN60950-1)
• 1 x 100/1000BASE-T port
• 1 x SFP port
• IEEE 802.3u/ab/z/x
• Auto-Negotiation for each port
• Full-Duplex operation at 1000 Mbps
• Half/Full-Duplex operation at 10/100 Mbps
• Back pressure at Half-Duplex operation
• Auto MDI/MDIX
• Wire speed reception and transmission
• Auto-MDI/MDIX adjustment for all twisted
pair ports
DIS-M100G-SW
| 21
End-To-End Industrial Networking
DIS-S Series
(Industrial optical SFP transceivers)
Model DIS-S301SX DIS-S302SX DIS-S310LX
Description
Standard
Compliant Standard IEEE802.3z 1000BASE-SX IEEE802.3z 1000BASE-LX
MSA Compliant Yes
Transceiver Type SFP
Fiber Channel FC-PI standard 100-M6-SN-I/100-M5-SN-I - 100-SM-LC-L
Fiber Media support Multi-Mode Single-Mode
Distance
Speed 1.25Gbps
Interface
Connector Duplex LC Connector
Single/Bi Direction Single-direction
Wavelength 850nm 1310nm
Output Optical Power
(TX Optical Power)
Input Optical Power
(RX Optical Power)
Sensitivity -22dBm -24dBm
Cable Type multi-mode 50/125um or 62.5/125um fiber Single-mode 9/125um fibre
Operating
Power 3.3V
Max Input Current 300mA
Power Budget (MIN Power
Budget)
MAX Power Budget 19 dB 19 dB 21 dB
Heat Generated 1.782kJ/h 2.376 kJ/h 2.376 kJ/h
Physical & Environment
Operating Temperature Range -40 to +85°C
Storage Temperature Range -40 to +85 °C
Humidity (Non-Condensing) 5 to 95% RH
Dimension ( W x D x H ) 13.7 x 55.4 x 8.5 mm
Weight 20 g
MTBF 224,167 hours 224,167 hours 223,857 hours
Bail latch color Black Blue
Emission (EMI) and Safety Certifications
EMI CE, FCC, VCCI
Safety LVD, EN 60825-1, EN 60825-2
1000BASE-SX Multi-Mode 550M
LC SFP Transceiver
62.5/125um: 300m
50/125um: 550m
MAX.: -3dBm, MIN.: -8 dBm -3dBm, -9dBm MAX.: -3dBm, MIN.: -8 dBm
MAX.: - 3 dBm, MIN.: - 22 dBm -3dBm, -22dBm MAX.: - 3 dBm, MIN.: - 24 dBm
14 dB 13 dB 16 dB
1000BASE-SX Multi-Mode 2KM
LC SFP Transceiver
62.5/125um fiber: 1km
50/125um fiber: 2km
1000BASE-LX Single-Mode 10KM
LC SFP Transceiver
10km
22 |
Industrial Switches Brochure
DWM-312 / DWM-312W
(4G LTE M2M Router)
Model
Mobile Network
Support
Data
1
Throughput
Device
Interfaces
Wi-Fi - • 802.11n/g/b
Standards • IEEE 802.3i
Advanced
Features
Physical
LED Status
Indicators
Power • 5V/2A adapter
Enclosure • Corrosion-resistant zinc-plated steel
Dimensions • 93 x 70 x 23.6 mm • 134 x 76 x 32 mm
Weight • 210 g • 500 g
Temperature • Operating: -20 to 60 ˚C
• 1 x 10/100 Fast Ethernet LAN port
• 1 x 5.5 mm DC input
• 2 x SMA (antenna connectors)
• Dual Micro-SIM slots
• Power
• Internet Connectivity
• Network Status
• Signal Strength
• Ethernet
• Flexible input: DC 5V/2A ~ 18V/0.7A
• Storage : -40 to 85 ˚C
DWM-312 DWM-312W
• LTE Cat. 4 Bands 1/2/3/5/7/8/20/28/38/40
• UMTS/HSPA 1/2/5/8, 850/900/1900/2100 Mhz
• Quadband GSM
• LTE Throughput up to 150 Mbps down/50 Mbps up
• HSPDA-DC up to 42 Mbps down/5.76 Mbps up
• Quadband EDGE up to 236.8 kbps
• 1 x 10/100 Fast Ethernet WAN/LAN port
• 1 x 10/100 Fast Ethernet LAN port
• 1 x 5.5 mm DC input
• 2 x SMA (antenna connectors)
• Dual Micro-SIM slots
• IEEE 802.3u
• QoS engine (Quality of Service)
• L2TP/PPTP/IPSec VPN Client/Server modes
• SNMP and D-View 7 Support
• Firmware over the air (FOTA) upgrades
• Web-based UI
• TR-069 CPE WAN Management Protocol
• D-ECS Support
• Power
• Internet Connectivity
• SIM Status
• Signal Strength
• 12V/1A adapter
• Flexible input: DC 9V/2A ~ 36V/0.7A
• Operating: -20 to 60 ˚C
• Storage : -30 to 80 ˚C
D-Link Edge Cloud Solution
(D-ECS)
D-ECS is an advanced EaaS (Edge as a
Service) cloud computing platform designed
to help business centrally manage M2M
devices such as DWM-312 and DWM-312W.
It allows network administrators to quickly
and easily deploy, configure, monitor and
troubleshoot multiple distributed networks
from the D-ECS web portal.
Highly Secure
• End-to-end encryption
• Multi-tenant access
• Role-based administration
Network Automation
• Configuration updates
• Scheduled firmware upgrades
• Failure detection and alert
• Automated reports
• Routing reboots
Highly Scalable
• Zero-touch deployment
• Unlimited network expansion
• Batch cloud configuration
Complete Visibility
• Visualised network topology
• Map display of network nodes
• Event filtering
• Searchable event logs
Humidity • Operating: 5% to 85% non-condensing
• Storage: 0% to 95% non-condensing
Certifications • RoHS, CE
DIS-H/N Series
(Industrial DIN rail power supplies)
Model
Number of Ports
30W 24VDC Ultra Slim DIN Rail PSU
• Input: 85 ~ 264VAC
• Output: 21.6 ~ 29V DC
• Din rail TS-35/7.5 or 15 mountable
• -30~70°C operating temperature
DIS-H30-24 DIS-H60-24 DIS-N240-48 DIS-N480-48
• Operating: 10% to 90% non-condensing
• Storage: 5% to 95% non-condensing
60W 24VDC Ultra Slim DIN Rail PSU
• Input: 85 ~ 264VAC
• Output: 21.6 ~ 29V DC
• Din rail TS-35/7.5 or 15 mountable
• -30~70°C operating temperature
240W 48VDC DIN Rail PSU
• Input: 90 ~ 264VAC
• Output: 48 ~ 55V DC
• Din rail TS-35/7.5 or 15 mountable
• -20~70°C operating temperature
480W 48VDC DIN Rail PSU
• Input: 90 ~ 264VAC
• Output: 48 ~ 55V DC
• Din rail TS-35/7.5 or 15 mountable
• -20~70°C operating temperature
| 23
Why D-Link
Why D-Link
D-Link is a global leader in connecting
people, businesses, and cities with our
computer networking solutions and
technology. Our innovative products and
services meet the needs of digital home
consumers, small to medium sized
businesses, enterprise environments, and
service providers. D-Link implements and
supports unified network solutions that
integrate capabilities in switching, wireless,
broadband, IP surveillance, and
cloud-based network management. An
award-winning designer, developer, and
manufacturer for over 30 years, D-Link has
grown from a group of friends in Taiwan
into a global brand with over 2,000
employees in 60 countries.
24 |
Industrial Switches Brochure
Loading...