Loading...
Version 1.0 | August 26, 2014
User Manual
AC1750 Wi-Fi Router
Cloud Router
DIR-866L
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.
Manual Revisions
Revision |
Date |
Description |
1.0 |
August 26, 2014 |
• Initial release for Revision A1 |
|
|
|
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link. All other third-party marks mentioned herein may be trademarks of their respective owners.
© 2014 D-Link. All Rights Reserved.
D-Link DIR-866L User Manual |
i |
Table of Contents
Table of Contents
Preface.................................................................................. |
i |
Manual Revisions........................................................................... |
i |
Trademarks....................................................................................... |
i |
Product Overview.............................................................. |
1 |
Package Contents......................................................................... |
1 |
Minimum Requirements............................................................. |
2 |
Introduction.................................................................................... |
3 |
Hardware Overview...................................................................... |
4 |
Connections............................................................................ |
4 |
LEDs............................................................................................ |
5 |
Installation.......................................................................... |
6 |
Before you Begin........................................................................... |
6 |
Wireless Installation Considerations...................................... |
7 |
Connect to your Network........................................................... |
8 |
Connect to an Existing Router................................................ |
11 |
Configuration................................................................... |
13 |
Quick Setup Wizard.................................................................... |
14 |
QRS Mobile App........................................................................... |
21 |
Web-based Configuration Utility........................................... |
22 |
Internet Connection Setup.............................................. |
23 |
Static (assigned by ISP)................................................. |
24 |
Dynamic (Cable).............................................................. |
25 |
PPPoE (DSL)...................................................................... |
26 |
PPTP.................................................................................... |
27 |
L2TP..................................................................................... |
29 |
DS-Lite................................................................................ |
31 |
Internet Connection Setup Wizard....................................... |
32 |
Wireless Settings.................................................................. |
37 |
Wi-Fi Connection Setup Wizard................................. |
38 |
Add Wireless Device with WPS Wizard.................... |
40 |
Manual Wireless Settings............................................. |
42 |
2.4GHz (802.11 n/g)................................................. |
42 |
5GHz (802.11ac/n/a)................................................ |
43 |
Wireless Security.................................................................. |
44 |
What is WPA?.................................................................... |
44 |
Configure WPA/WPA2-Personal (PSK)..................... |
45 |
Configure WPA/WPA2-Enterprise (RADIUS).......... |
46 |
Network Settings................................................................. |
48 |
Router Settings................................................................ |
48 |
DHCP Server Settings.................................................... |
49 |
DHCP Reservation.......................................................... |
51 |
Media Server......................................................................... |
52 |
Storage.................................................................................... |
53 |
SharePort Mobile Setup Wizard................................ |
54 |
SharePort Mobile Manual Setup............................... |
56 |
Access Files from the Internet.................................... |
57 |
IPv6........................................................................................... |
58 |
IPv6 Internet Connection Setup Wizard................. |
60 |
IPv6 Manual Setup......................................................... |
65 |
Auto Detection.......................................................... |
65 |
Static IPv6.................................................................... |
66 |
Autoconfiguration.................................................... |
67 |
D-Link DIR-866L User Manual |
ii |
Table of Contents
PPPoE............................................................................ |
68 |
IPv6 in IPv4 Tunnel................................................... |
70 |
6 to 4 Tunneling........................................................ |
71 |
6rd.................................................................................. |
72 |
Local Connectivity.................................................... |
73 |
mydlink Settings.................................................................. |
74 |
Advanced............................................................................... |
75 |
Virtual Server.................................................................... |
75 |
Port Forwarding.............................................................. |
76 |
Application Rules............................................................ |
77 |
QoS Engine....................................................................... |
78 |
Network (MAC) Filters................................................... |
80 |
Access Control................................................................. |
81 |
Access Control Wizard............................................. |
81 |
Website Filters................................................................. |
85 |
Inbound Filters................................................................ |
86 |
Firewall Settings.............................................................. |
87 |
Routing............................................................................... |
89 |
Advanced Wireless......................................................... |
90 |
Wi-Fi Protected Setup (WPS)...................................... |
91 |
WPS Button................................................................. |
92 |
Advanced Network Settings....................................... |
93 |
Guest Zone....................................................................... |
94 |
IPv6 Firewall...................................................................... |
95 |
IPv6 Routing..................................................................... |
96 |
Tools......................................................................................... |
97 |
Admin................................................................................. |
97 |
Time..................................................................................... |
98 |
SysLog................................................................................. |
99 |
Email Settings............................................................... |
100 |
System............................................................................. |
101 |
Firmware......................................................................... |
102 |
Language Pack Upgrade........................................... |
102 |
Dynamic DNS................................................................ |
103 |
System Check................................................................ |
105 |
Schedules....................................................................... |
106 |
Status.................................................................................... |
107 |
Device Info..................................................................... |
107 |
Logs.................................................................................. |
108 |
Statistics.......................................................................... |
109 |
Internet Sessions......................................................... |
110 |
Routing............................................................................ |
111 |
Wireless........................................................................... |
112 |
IPv6................................................................................... |
113 |
IPV6 Routing.................................................................. |
114 |
Support................................................................................ |
115 |
Using the mydlink SharePort™ App.............................. |
116 |
Using the mydlink SharePort™ App for iOS Devices.... |
116 |
mydlink SharePort™ for iOS Devices in a Local |
|
Network............................................................................... |
119 |
Main Menu.......................................................................... |
122 |
Documents......................................................................... |
123 |
Pictures................................................................................. |
125 |
Videos................................................................................... |
127 |
Music..................................................................................... |
129 |
Folders.................................................................................. |
132 |
Favorites............................................................................... |
135 |
D-Link DIR-866L User Manual |
iii |
Table of Contents
Using the mydlink SharePort™ App for Android™........ |
136 |
mydlink SharePort™ for Android in a Local |
|
Network............................................................................... |
139 |
Main Menu.......................................................................... |
141 |
Documents......................................................................... |
142 |
Pictures................................................................................. |
144 |
Videos................................................................................... |
146 |
Music..................................................................................... |
148 |
Folders.................................................................................. |
151 |
Favorites............................................................................... |
155 |
Using SharePort with a Web Browser for Local Access156 |
|
Music..................................................................................... |
159 |
Pictures................................................................................. |
160 |
Videos................................................................................... |
161 |
Documents......................................................................... |
162 |
Connect a Wireless Client to your Router..................... |
163 |
WPS Button................................................................................ |
163 |
Windows® 8................................................................................ |
164 |
Windows® 7................................................................................ |
166 |
WPA/WPA2.......................................................................... |
166 |
WPS....................................................................................... |
169 |
Windows Vista®......................................................................... |
173 |
WPA/WPA2.......................................................................... |
174 |
WPS/WCN 2.0..................................................................... |
176 |
Troubleshooting............................................................. |
177 |
Wireless Basics................................................................ |
181 |
What is Wireless?...................................................................... |
182 |
Tips................................................................................................ |
184 |
Wireless Modes......................................................................... |
185 |
Networking Basics.......................................................... |
186 |
Check your IP address............................................................. |
186 |
Windows® 8 Users............................................................ |
186 |
Windows® 7/Vista® Users............................................... |
186 |
Statically Assign an IP Address............................................ |
187 |
Windows® 8 Users............................................................. |
187 |
Windows® 7/ Vista® Users............................................... |
188 |
Technical Specifications................................................. |
189 |
Contacting Technical Support....................................... |
190 |
GPL Code Statement...................................................... |
191 |
Warranty......................................................................... |
203 |
Registration.................................................................... |
210 |
D-Link DIR-866L User Manual |
iv |
Section 1 - Product Overview
ProductPackageOverviewContents
DIR-866L AC1750 Wi-Fi Router
Power Adapter
Ethernet Cable
Wi-Fi Configuration Card
Quick Install Guide
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the DIR-866L will cause damage and void the warranty for this product.
D-Link DIR-866L User Manual |
1 |
Section 1 - Product Overview
Minimum Requirements
Network Requirements |
• An Ethernet-based broadband modem |
|
|
|
|
|
Computer with the following: |
|
|
• Windows® or Mac OS® X operating system |
|
|
• An installed Ethernet adapter or wireless adapter |
|
Web-based Configuration |
Supported Browsers: |
|
• Internet Explorer® 7 or higher |
||
Utility Requirements |
• Firefox® |
|
|
• Chrome™ |
|
|
• Safari® 5 or higher |
|
|
Windows® Users: Make sure you have the latest version of Java installed. |
|
|
Visit www.java.com to download the latest version. |
|
|
|
|
mydlink™ Requirements |
For mydlink and mydlink app requirements, refer to: |
|
http://www.mydlink.com |
||
|
||
|
|
D-Link DIR-866L User Manual |
2 |
Section 1 - Product Overview
Introduction
The DIR-866L AC1750 Wi-Fi Router provides revolutionary 802.11ac wireless speed - up to 1750Mbps - for flawless HD video streaming to multiple devices.
With mydlink™ Cloud Services, you can monitor your home network from anywhere, anytime, using your iPhone, iPad, and Android device(s). Monitor what websites are being visited, block access from unwanted devices, and receive automatic e-mail alerts when unauthorized connections are attempted.
With the mydlink SharePort™ app, you can wirelessly access your media that is stored on a connected USB drive from your mobile devices. Best of all, you can get free apps for network management and file access.
* Maximum wireless signal rate derived from IEEE Standard 802.11ac, 802.11a, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DIR-866L User Manual |
3 |
Section 1 - Product Overview
Hardware Overview
Connections
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||||||||||||
|
1 |
USB Port |
|
Connect a USB flash drive to share content throughout your network. |
|
||||||||||||
|
|
|
|
|
|
||||||||||||
|
2 |
WPS Button |
|
Press the WPS button to start the WPS process. The Power LED will start to blink. |
|
||||||||||||
|
|
|
|
|
|
||||||||||||
|
3 |
LAN Ports (1-4) |
|
Connect Ethernet devices such as computers, switches, storage (NAS) devices and video game consoles. |
|
||||||||||||
|
|
|
|
|
|
||||||||||||
|
4 |
Internet Port |
|
Connect your broadband modem to this port using an Ethernet cable. |
|
||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
|
5 |
Power Button |
|
Press the power button to power the router on and off. |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|||||||||
|
6 |
Power Port |
|
Connect the supplied power adapter to this port. |
|
|
|
|
|||||||||
|
|
|
|
|
|
||||||||||||
|
7 |
Reset Button |
|
Press and hold the reset button with a paper clip for six seconds to reset the router to the factory default settings. |
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-Link DIR-866L User Manual |
|
|
|
|
|
|
|
|
|
|
4 |
||||||
Section 1 - Product Overview
Hardware Overview
LEDs
1
2
1 |
Power LED |
A solid green light indicates a proper connection to the power supply. The light will be solid orange |
|
during reboot, and will blink green during the WPS process. |
|||
|
|
||
|
|
|
|
2 |
|
A solid green light indicates a successful connection to the Internet. If the LED is solid orange, the |
|
Internet LED |
connection is good but the router cannot connect to the Internet. If the LED is blinking orange, this |
||
|
|
indicates that the “on demand” connection type is set and the Internet connection is idle. |
|
|
|
|
D-Link DIR-866L User Manual |
5 |
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Before you Begin
•Please configure the router with the computer that was last connected directly to your modem.
•Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information.
•Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to five minutes.
•Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-866L can work properly. For details, contact your ISP or refer to the user manual for your modem/router device.
D-Link DIR-866L User Manual |
6 |
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1.Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3.Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4.Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5.If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
D-Link DIR-866L User Manual |
7 |
Section 2 - Installation
Connect to your Network
1. Turn off and unplug the power to your DSL or cable modem. This is required.
Modem
2. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or cable modem.
Ethernet Cable
Ethernet Port
1
2 LAN 3
4
INTERNET
R
2A
|
DIR-866L |
Internet Port (yellow) |
Modem |
|
|
|
|
D-Link DIR-866L User Manual |
8 |
Section 2 - Installation
3. Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router.
USB
WPS
1
2 LAN 3
4
INTERNET
POWER
Computer
Ethernet Cable
12V 2A
DIR-866L
4. Plug the power back into your DSL or cable modem. Please wait about one minute before continuing.
Computer
USB
|
2 |
|
|
LAN |
|
|
3 |
|
|
4 |
|
|
INTERNET |
|
Modem |
POWER |
|
12V |
2A |
|
DIR-866L
D-Link DIR-866L User Manual |
9 |
Section 2 - Installation
5.Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router.
Modem
Computer
USB
2 LAN 3
4
INTERNET
POWER |
|
|
12V |
2A |
Power Button |
|
|
|
DIR-866L
6.After the router has powered up, verify that the power (green) and Internet (orange or green) LEDs are both lit. Skip to“Configuration”on page 13 to learn about your configuration options.
D-Link DIR-866L User Manual |
10 |
Section 2 - Installation
Connect to an Existing Router
Note: It is strongly recommended that you replace your existing router with the DIR-866L instead of using both. If your modem is a combo router, you may want to contact your ISP or review the manufacturer’s user guide so you can put the router into Bridge mode, which will ‘turn off’ the router’s (NAT) functions.
If you are connecting the DIR-866L router to an existing router to use as a wireless access point and/or switch, you will have to do the following to the DIR-866L before connecting it to your network:
•Disable UPnP™
•Disable DHCP
•Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1.Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.
2.Open a web browser, enter http://192.168.0.1 (or http://dlinkrouter.local./) and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue.
3.Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.
4.Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings to continue.
D-Link DIR-866L User Manual |
11 |
Section 2 - Installation
5.Under Router Settings, enter an available IP Address and the Subnet Mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.
6.Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7.Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet (WAN) port of the D-Link router.
8.You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network.
D-Link DIR-866L User Manual |
12 |
Section 3 - Configuration
Configuration
There are several different ways you can configure your router to connect to the Internet and connect to your clients:
•QRS Mobile App - Use your iPhone, iPad, or Android device to configure your router. See ”QRS Mobile App” on page 21.
•D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to“Quick Setup Wizard” on page 14.
•Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to “Manual Internet Setup” on page 24.
D-Link DIR-866L User Manual |
13 |
Section 3 - Configuration
Quick Setup Wizard
If this is your first time installing the router, launch your web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari).This will
automatically launch the D-Link Setup Wizard. If the wizard does not start automatically, enter http://dlinkrouter.local./ or the IP address of the router (192.168.0.1).
The wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet.
When the Welcome screen appears, click Next to continue.
Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. (See instructions on page 16 for PPPoE, PPTP and L2TP.)
D-Link DIR-866L User Manual |
14 |
Section 3 - Configuration
If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Connect.
If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet connection settings to display a list of connection types to choose from.
The router may automatically detect your Internet connection type. If not, select your Internet connection type from the list.
You can select DHCP Connection (Dynamic IP Address) if your Internet connection automatically provides you with an IP Address. This option is commonly used for cable modem services.
Click Next to continue.
D-Link DIR-866L User Manual |
15 |
Section 3 - Configuration
If the router detected or you selected PPPoE, enter your PPPoE User Name and Password and click Next to continue.
Note: Make sure you remove the PPPoE software from your computer. The software is no longer needed and will not work through a router.
If the router detected or you selected PPTP, enter your PPTP User Name, Password, and other information supplied by your ISP. Click Next to continue.
If the router detected or you selected L2TP, enter your User Name, Password, and other information supplied by your ISP. Click Next to continue.
D-Link DIR-866L User Manual |
16 |
Section 3 - Configuration
If the router detected or you selected Static, enter the IP information and DNS settings supplied by your ISP. Click Next to continue.
For both the 2.4GHz and 5GHz segments, create a wireless network name (SSID) using up to 32 characters.
Create a wireless security passphrase or key (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.
Click Next to continue.
In order to secure your router, please enter a new Password. For added security, check the Enable Graphical Authentication box to enable CAPTCHA graphical authentication. Click Next to continue.
D-Link DIR-866L User Manual |
17 |
Section 3 - Configuration
Select your time zone from the drop-down menu and click Next to continue.
The Confirm Wi-Fi Settings window will display your wireless settings. Write the information down, so you can configure your Wi-Fi devices correctly. Click Next to continue.
The Saving Settings window will appear. Wait while the router is checking Internet connectivity.
You will have the option of creating a bookmark. If you want a bookmark to the Router Web Management, click OK. If not, click Cancel.
Note: If you click OK, another window may appear, depending on the browser you are using. Follow the instructions to create a bookmark.
D-Link DIR-866L User Manual |
18 |
Section 3 - Configuration
To remotely manage your network using the mydlink.com website (with the mydlink SharePort™ app or the mydlink Lite app), you must have an account. Click a radio button to indicate if you already have a mydlink account or if you need to create one. Click Next to continue.
If you do not want to register at this time, click Skip.
If you clicked Yes, I have a mydlink account enter your mydlink Account Name (E-mail Address) and Password. Click Login to register your router.
If you clicked No, I want to login with a new mydlink account fill out the requested information and click Sign up to create your mydlink account. This is a free service. Go to www.mydlink.com for more information.
D-Link DIR-866L User Manual |
19 |
Section 3 - Configuration
To download the mydlink Lite app or the mydlink SharePort app, visit the App Store or Google Play.
For more on mydlink Lite go to https://mydlink.com/apps.
PCandMacuserscanaccessthemydlinkportalathttp://mydlink.com.
D-Link DIR-866L User Manual |
20 |
Section 3 - Configuration
QRS Mobile App
The QRS Mobile app allows you to install and configure your router from your iPad, iPhone (iOS 4.3 or higher), or Android device.
Step 1
From your iPad, iPhone, or Android device, go to the iTunes Store and search for D-Link. Select QRS Mobile and then download it.
You may also find the app by scanning the QR code below with a QR code reader.
iOS |
Android |
Step 2
Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the wireless network name (SSID) as listed on the supplied info card. Select and then enter your security password (Wi-Fi Password).
Step 3
Once you connect to the router, launch the QRS Mobile app and it will guide you through the installation and configuration of your router.
Wi-Fi Name(SSID) 2.4Ghz: dlink-xxxx
Wi-Fi Name(SSID) 5GHz: dlink-xxxx-5GHz Password: xxxxxxxx
To con gure your router, go to: http://dlinkrouter.local.
Or http://192.168.0.1 Username: “Admin”
Password:”“ (leave the eld blank)
D-Link DIR-866L User Manual |
21 |
Section 3 - Configuration
Web-based Configuration Utility
Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or Safari) and enter http://dlinkrouter.local./ or the IP address of the router (192.168.0.1).
Enter your Password and click Login.
Note: If you did not create a password with the Setup Wizard, leave the password blank by default.
D-Link DIR-866L User Manual |
22 |
Section 3 - Configuration
Internet Connection Setup
If you want to configure your router to connect to the Internet using the wizard, click Internet Connection SetupWizard. Refer to“Internet Connection Setup Wizard” on page 32.
If you consider yourself an advanced user, click Manual Internet ConnectionSetupto configure your connection manually. (Instructions for manual setup begin below.)
The next few pages explain each of the ISP connection types. You can select the type from the My Internet Connection is drop-down menu.
D-Link DIR-866L User Manual |
23 |
Section 3 - Configuration
Manual Internet Setup
Static (assigned by ISP)
Select Static IP if all the IP information is provided to you by your ISP.
My Internet Select Static IP to manually enter the IP settings supplied Connection is: by your ISP (Internet Service Provider).
True Gigabit Routing Check the box to EnableTrue Gigabit Routing Connectivity.
Connectivity Setting:
IP Address: Enter the IP Address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Default Gateway assigned by your ISP.
DNS Servers: The DNS server information will be supplied by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can click on Copy Your PC’s MAC Address to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-866L User Manual |
24 |
Section 3 - Configuration
Internet Setup
Dynamic (Cable)
My Internet Select Dynamic IP (DHCP) to obtain IP Address information Connection is: automatically from your ISP.This option is commonly used for cable
modem services.
True Gigabit Routing Check the box to Enable True Gigabit Routing Connectivity.
Connectivity Setting:
Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Use Unicasting: Check the box if you are having problems obtaining an IP address from your ISP.
Primary/Secondary Enter the Primary and Secondary DNS server IP addresses assigned DNS Server: by your ISP. These addresses are usually obtained automatically from your ISP. Leave blank if you did not specifically receive these
from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can click on CopyYour PC’s MAC Address to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-866L User Manual |
25 |
Loading...