D-Link DIR-841 User Manual
User Manual
DIR-841
AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
January 2021
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Contents
Chapter 1. Introduction.........................................5
Contents and Audience.......................................................5
Conventions.................................................................5
Document Structure..........................................................5
Chapter 2. Overview.............................................6
General Information.........................................................6
Specifications..............................................................8
Product Appearance.........................................................14
Upper Panel..............................................................14
Back and Bottom Panels...................................................16
Delivery Package...........................................................18
Chapter 3. Installation and Connection.........................19
Before You Begin...........................................................19
Connecting to PC...........................................................20
PC with Ethernet Adapter.................................................20
Obtaining IP Address Automatically (OS Windows 7)........................21
Obtaining IP Address Automatically (OS Windows 10).......................26
PC with Wi-Fi Adapter....................................................30
Obtaining IP Address Automatically and Connecting
to Wireless Network (OS Windows 7).......................................31
Obtaining IP Address Automatically and Connecting
to Wireless Network (OS Windows 10)......................................34
Connecting to Web-based Interface..........................................37
Web-based Interface Structure..............................................39
Summary Page.............................................................39
Home Page................................................................41
Menu Sections............................................................42
Notifications............................................................43
Chapter 4. Configuring via Web-based Interface.................44
Initial Configuration Wizard...............................................44
Selecting Operation Mode.................................................46
Router.................................................................46
Access Point or Repeater...............................................47
Changing LAN IPv4 Address................................................49
Wi-Fi Client.............................................................50
Configuring WAN Connection...............................................52
Static IPv4 Connection.................................................53
Static IPv6 Connection.................................................54
PPPoE, IPv6 PPPoE, PPPoE Dual Stack,
PPPoE + Dynamic IP (PPPoE Dual Access) Connections.....................55
PPPoE + Static IP (PPPoE Dual Access) Connection.......................56
PPTP + Dynamic IP or L2TP + Dynamic IP Connection......................57
PPTP + Static IP or L2TP + Static IP Connection........................58
Configuring Wireless Network.............................................59
Configuring LAN Ports for IPTV/VoIP......................................61
Changing Web-based Interface Password....................................63
Connection of Multimedia Devices...........................................65
Page 2 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Statistics.................................................................68
Network Statistics.......................................................68
DHCP.....................................................................69
Routing Table............................................................70
Clients and Sessions.....................................................71
Port Statistics..........................................................72
Multicast Groups.........................................................73
Connections Setup..........................................................74
WAN......................................................................74
Creating Dynamic IPv4 or Static IPv4 WAN Connection....................76
Creating Dynamic IPv6 or Static IPv6 WAN Connection....................80
Creating PPPoE WAN Connection..........................................84
Creating PPTP or L2TP WAN Connection...................................88
Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection.................93
LAN......................................................................98
IPv4...................................................................98
IPv6..................................................................103
WAN Reservation.........................................................106
Wi-Fi.....................................................................108
Basic Settings..........................................................108
Client Management.......................................................116
WPS.....................................................................117
Using WPS Function via Web-based Interface............................119
Using WPS Function without Web-based Interface........................120
WMM.....................................................................121
Client..................................................................124
Client Shaping..........................................................127
Additional..............................................................129
MAC Filter..............................................................133
Roaming.................................................................136
Advanced..................................................................138
VLAN....................................................................139
DNS.....................................................................141
DDNS....................................................................143
Ports Settings..........................................................145
Redirect................................................................149
Routing.................................................................150
TR-069 Client...........................................................152
Remote Access...........................................................154
UPnP IGD................................................................156
UDPXY...................................................................157
IGMP/MLD................................................................159
ALG/Passthrough.........................................................161
IPsec...................................................................163
Firewall..................................................................169
IP Filter...............................................................169
Virtual Servers.........................................................173
DMZ.....................................................................176
MAC Filter..............................................................177
URL Filter..............................................................179
DoS Protection..........................................................181
Page 3 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
System....................................................................184
Configuration...........................................................185
Firmware Update.........................................................187
Local Update..........................................................188
Remote Update.........................................................189
Log.....................................................................190
Ping....................................................................193
Traceroute..............................................................195
Telnet..................................................................197
System Time.............................................................198
Yandex.DNS................................................................200
Settings................................................................200
Devices and Rules.......................................................202
Chapter 5. Operation Guidelines...............................204
Safety Rules and Conditions...............................................204
Wireless Installation Considerations......................................205
Chapter 6. Abbreviations and Acronyms.........................206
Page 4 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Introduction
CHAPTER 1. INTRODUCTION
Contents and Audience
This manual describes the router DIR-841 and explains how to configure and operate it.
This manual is intended for users familiar with basic networking concepts, who create an in-home
local area network, and system administrators, who install and configure networks in offices.
Conventions
Example Description
text The body text of the manual.
Before You Begin A reference to a chapter or section of this manual.
“Quick Installation
Guide”
A reference to a document.
Change
A name of a menu, menu item, control (field, checkbox, drop-down
list, button, etc.).
192.168.0.1
Data that you should enter in the specified field.
!
Information An important note.
Document Structure
Chapter 1 describes the purpose and structure of the document.
Chapter 2 gives an overview of the router's hardware and software features, describes its
appearance and the package contents.
Chapter 3 explains how to install the router DIR-841 and configure a PC in order to access its webbased interface.
Chapter 4 describes all pages of the web-based interface in detail.
Chapter 5 includes safety instructions and tips for networking.
Chapter 6 introduces abbreviations and acronyms most commonly used in User Manuals for
D-Link customer premises equipment.
Page 5 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
CHAPTER 2. OVERVIEW
General Information
The DIR-841 device is a wireless dual band router with a built-in 4-port switch. It provides a fast
and simple way to create a wireless and wired network at home or in an office.
Also you are able to connect the wireless router DIR-841 to a cable or DSL modem or to a private
Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of
professional tasks. The built-in 4-port switch enables you to connect Ethernet-enabled computers,
game consoles, and other devices to your network.
Using the DIR-841 device, you are able to quickly create a high-speed wireless network at home or
in your office, which lets computers and mobile devices access the Internet virtually anywhere
(within the operational range of your wireless network). Simultaneous activity of 2.4GHz band and
5GHz band allows performing a wide range of tasks. The router can operate as a base station for
connecting wireless devices of the standards 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac (at
the wireless connection rate up to 1167Mbps1).
The router supports multiple functions for the wireless interface: several security standards (WEP,
WPA/WPA2/WPA3), MAC address filtering, WPS, WMM.
In addition, the device is equipped with a button for switching the Wi-Fi network off/on. If needed,
for example, when you leave home, you can easily switch the router’s WLAN by pressing the
button, and devices connected to the LAN ports of the router will stay online.
Multi-user MIMO technology allows to distribute the router's resources to let multiple wireless
clients use the Wi-Fi network efficiently, keeping high rates for HD media streaming, lag-free
gaming, and fast transfer of large files.
Transmit Beamforming technology allows to flexibly change the antennas' radiation pattern and to
redistribute the signal directly to wireless devices connected to the router.
Smart adjustment of Wi-Fi clients is useful for networks based on several D-Link access points or
routers – when the smart adjustment function is configured on each of them, a client always
connects to the access point (router) with the highest signal level.
Support of guest Wi-Fi network allows you to create a separate wireless network with individual
security settings and maximum rate limitation. Devices connected to the guest network will be able
to access the Internet, but will be isolated from the devices and resources of the router's LAN.
The wireless router DIR-841 includes a built-in firewall. The advanced security functions minimize
threats of hacker attacks, prevent unwanted intrusions to your network, and block access to
unwanted websites for users of your LAN.
In addition, the router supports IPsec and allows to create secure VPN tunnels.
Built-in Yandex.DNS service protects against malicious and fraudulent web sites and helps to block
access to adult content on children's devices.
You can configure the settings of the wireless router DIR-841 via the user-friendly web-based
interface (the interface is available in several languages).
1 Up to 300Mbps for 2.4GHz and up to 867Mbps for 5GHz.
Page 6 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
The configuration wizard allows you to quickly switch DIR-841 to one of the following modes:
router (for connection to a wired or wireless ISP), access point, repeater, or client, and then
configure all needed setting for operation in the selected mode in several simple steps.
Also DIR-841 supports configuration and management via mobile application for Android and
iPhone smartphones.
You can simply update the firmware: the router itself finds approved firmware on D-Link update
server and notifies when ready to install it.
Page 7 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Specifications
*
Hardware
Processor
· RTL8197FH (1GHz)
RAM
· 64MB, DDR2, built in processor
Flash
· 8MB, SPI
Interfaces
· 10/100/1000BASE-T WAN port
· 4 10/100BASE-TX LAN ports
LEDs
· Power
· Internet
· 4 LAN LEDs
· WLAN 2.4G
· WLAN 5G
· WPS
Buttons
· POWER button to power on/power off
· WIFI button to enable/disable wireless network
· WPS button to set up wireless connection
· RESET button to restore factory default settings
Antenna
· Four external non-detachable antennas (5dBi gain)
MIMO
· 2 x 2, MU-MIMO
Power connector
· Power input connector (DC)
Software
WAN connection types
· PPPoE
· IPv6 PPPoE
· PPPoE Dual Stack
· Static IPv4 / Dynamic IPv4
· Static IPv6 / Dynamic IPv6
· PPPoE + Static IP (PPPoE Dual Access)
· PPPoE + Dynamic IP (PPPoE Dual Access)
· PPTP/L2TP + Static IP
· PPTP/L2TP + Dynamic IP
* The device features are subject to change without notice. For the latest versions of the firmware and relevant
documentation, visit www.dlink.ru.
Page 8 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Software
Network functions
· Support of IEEE 802.1X for Internet connection
· DHCP server/relay
· Advanced configuration of built-in DHCP server
· Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation
· Automatic obtainment of LAN IP address (for access point/repeater/client
modes)
· DNS relay
· Dynamic DNS
· Static IPv4/IPv6 routing
· IGMP/MLD Proxy
· RIP
· Support of UPnP IGD
· Support of VLAN
· WAN ping respond
· Support of SIP ALG
· Support of RTSP
· WAN failover
· Autonegotiation of speed, duplex mode, and flow control / Manual speed and
duplex mode setup for each Ethernet port
· Setup of maximum TX rate for each port of the router
· Built-in UDPXY application
Firewall functions
· Network Address Translation (NAT)
· Stateful Packet Inspection (SPI)
· IPv4/IPv6 filter
· MAC filter
· URL filter
· DMZ
· Prevention of ARP and DDoS attacks
· Virtual servers
· Built-in Yandex.DNS web content filtering service
VPN
· IPsec/PPTP/L2TP/PPPoE pass-through
· IPsec tunnels
Management and monitoring
· Local and remote access to settings through TELNET/WEB (HTTP/HTTPS)
· Multilingual web-based interface for configuration and management
· Support of D-Link Assistant application for Android and iPhone smartphones
· Notification on connection problems and auto redirect to settings
· Firmware update via web-based interface
· Automatic notification on new firmware version
· Saving/restoring configuration to/from file
· Support of logging to remote host
· Automatic synchronization of system time with NTP server and manual
time/date setup
· Ping utility
· Traceroute utility
· TR-069 client
· Automatic reboot on schedule
Wireless Module Parameters
Standards
· IEEE 802.11ac Wave 2
· IEEE 802.11a/b/g/n
Page 9 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Wireless Module Parameters
Frequency range
The frequency range depends upon the
radio frequency regulations applied in your
country
· 2400 ~ 2483.5MHz
· 5150 ~ 5350MHz
· 5650 ~ 5850MHz
Wireless connection security
· WEP
· WPA/WPA2 (Personal/Enterprise)
· WPA3 (Personal)
· МАС filter
· WPS (PBC/PIN)
Advanced functions
· Support of client mode
· WMM (Wi-Fi QoS)
· Information on connected Wi-Fi clients
· Advanced settings
· Smart adjustment of Wi-Fi clients
· Guest Wi-Fi / support of MBSSID
· Rate limitation for wireless network/separate MAC addresses
· Periodic scan of channels, automatic switch to least loaded channel
· Support of 802.11ac (5GHz) and 802.11n (2.4GHz) TX Beamforming
· Autonegotiation of channel bandwidth in accordance with environment
conditions (20/40 Coexistence)
· Support of STBC
Wireless connection rate
· IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
· IEEE 802.11b: 1, 2, 5.5, and 11Mbps
· IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
· IEEE 802.11n (2.4GHz): from 6.5 to 300Mbps (MCS0–MCS15)
· IEEE 802.11n (5GHz): from 6.5 to 300Mbps (from MCS0 to MCS15)
· IEEE 802.11ac (5GHz): from 6.5 to 867Mbps (from MCS0 to MCS9)
Transmitter output power
The maximum value of the transmitter
output power depends upon the radio
frequency regulations applied in your
country
· 802.11a (typical at room temperature 25 °C)
14dBm at 6, 9, 12, 18, 24Mbps
13dBm at 36Mbps
12.5dBm at 48Mbps
12dBm at 54Mbps
· 802.11b (typical at room temperature 25 °C)
15dBm at 1, 2, 5.5, 11Mbps
· 802.11g (typical at room temperature 25 °C)
15dBm at 6, 9, 12, 18, 24, 36, 48, 54Mbps
· 802.11n (typical at room temperature 25 °C)
2.4GHz, HT20
15dBm at MCS0~7
2.4GHz, HT40
15dBm at MCS0~7
5GHz, HT20
14dBm at MCS0~4
13dBm at MCS5
12.5dBm at MCS6
12dBm at MCS7
5GHz, HT40
14dBm at MCS0~2
13dBm at MCS3~4
12.5dBm at MCS5~6
12dBm at MCS7
Page 10 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Wireless Module Parameters
· 802.11ac (typical at room temperature 25 °C)
VHT20
14dBm at MCS0~4
13dBm at MCS5
12dBm at MCS6
11dBm at MCS7/8
VHT40
14dBm at MCS0~2
13dBm at MCS3~4
12dBm at MCS5~6
11dBm at MCS7/8/9
VHT80
14dBm at MCS0~4
13dBm at MCS5~6
12dBm at MCS7
11dBm at MCS8/9
Receiver sensitivity
· 802.11a (typical at PER < 10% (1000-byte PDUs) at room temperature 25 °C)
-82dBm at 6Mbps
-81dBm at 9Mbps
-79dBm at 12Mbps
-77dBm at 18Mbps
-74dBm at 24Mbps
-70dBm at 36Mbps
-66dBm at 48Mbps
-65dBm at 54Mbps
· 802.11b (typical at PER = 8% (1000-byte PDUs) at room temperature 25 °C)
-80dBm at 1Mbps
-80dBm at 2Mbps
-76dBm at 5.5Mbps
-76dBm at 11Mbps
· 802.11g (typical at PER < 10% (1000-byte PDUs) at room temperature 25 °C)
-82dBm at 6Mbps
-81dBm at 9Mbps
-79dBm at 12Mbps
-77dBm at 18Mbps
-74dBm at 24Mbps
-70dBm at 36Mbps
-66dBm at 48Mbps
-65dBm at 54Mbps
· 802.11n (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C)
2.4GHz, HT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7
2.4GHz, HT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7
Page 11 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Wireless Module Parameters
5GHz, HT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7
5GHz, HT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7
· 802.11ac (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C)
VHT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7
-56dBm at MCS8
VHT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7
-56dBm at MCS8
-54dBm at MCS9
VHT80
-76dBm at MCS0
-73dBm at MCS1
-71dBm at MCS2
-68dBm at MCS3
-64dBm at MCS4
-60dBm at MCS5
-59dBm at MCS6
-58dBm at MCS7
-53dBm at MCS8
-51dBm at MCS9
Modulation schemes
· 802.11a: BPSK, QPSK, 16QAM, 64QAM with OFDM
· 802.11b: DQPSK, DBPSK, DSSS, CCK
· 802.11g: BPSK, QPSK, 16QAM, 64QAM with OFDM
· 802.11n: BPSK, QPSK, 16QAM, 64QAM with OFDM
· 802.11ac: BPSK, QPSK, 16QAM, 64QAM, up to 256QAM with OFDM
Page 12 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Physical Parameters
Dimensions (L x W x H)
· 205 x 136 x 33 mm (8.07 x 5.35 x 1.3 in)
Weight
· 285 g (0.63 lb)
Operating Environment
Power
· Output: 12V DC, 1A
Temperature
· Operating: from 0 to 40 °C
· Storage: from -20 to 65 °C
Humidity
· Operating: from 10% to 90% (non-condensing)
· Storage: from 5% to 95% (non-condensing)
Page 13 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Product Appearance
Upper Panel
Figure 1. Upper panel view.
LED Mode Description
Power
Solid green
The router is powered on.
No light
The router is powered off.
Internet
Solid green
The WAN cable is connected to the port.
Blinking green
Data transfer through the WAN port.
No light
The WAN cable is not connected.
Page 14 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
LED Mode Description
LAN 1-4
Solid green
A device (computer) is connected to the relevant port,
the connection is on.
Blinking green
Data transfer through the relevant LAN port.
When the router is being loaded, the LEDs are blinking
one at a time.
When the firmware is being upgraded, the LEDs are
blinking two at a time.
No light
The cable is not connected to the relevant port.
WLAN 2.4G
WLAN 5G
Solid green
The router's WLAN of the relevant band is on.
Blinking green
Data transfer through the Wi-Fi network of the relevant
band.
No light
The router's WLAN of the relevant band is off.
WPS
Blinking green
Attempting to add a wireless device via the WPS
function.
No light
The WPS function is not in use.
Page 15 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Back and Bottom Panels
Figure 2. Back panel view.
Port Description
WIFI
A button to enable/disable wireless network.
To disable the router's wireless network: with the device turned on,
press the button and release. The WLAN 2.4G and WLAN 5G LEDs
should turn off.
WPS
A button to set up wireless connection (the WPS function).
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The WPS LED should start
blinking.
LAN 1-4
4 Ethernet ports to connect computers or network devices.
WAN
A port to connect to a cable or DSL modem or to a private Ethernet
line (it is recommended to use the cable included in the delivery
package).
POWER
A button to turn the router on/off.
Also, the power connector is located on the back panel of the router.
Page 16 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
The RESET button located on the bottom panel of the router is designed to restore the factory
default settings. To restore the factory defaults, push the button (with the device turned on), hold it
for 10 seconds, and then release the button.
The device is also equipped with four external non-detachable Wi-Fi antennas.
Page 17 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Overview
Delivery Package
The following should be included:
• Router DIR-841
• Power adapter DC 12V/1A
• Ethernet cable
• “Quick Installation Guide” (brochure).
The “User Manual” and “Quick Installation Guide” documents are available on D-Link website
(see www.dlink.ru).
!
Using a power supply with a different voltage rating than the one included will cause
damage and void the warranty for this product.
Page 18 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
CHAPTER 3. INSTALLATION AND CONNECTION
Before You Begin
Please, read this manual prior to installing the device. Make sure that you have all the necessary
information and equipment.
Computer or Mobile Device
Configuration of the wireless dual band router with a built-in 4-port switch DIR-841 (hereinafter
referred to as “the router”) is performed via the built-in web-based interface. The web-based
interface is available from any operating system that supports a web browser.
Also you can use D-Link Assistant application for Android or iPhone mobile devices (smartphones
or tablets).
PC Web Browser
The following web browsers are recommended:
• Apple Safari 8 and later
• Google Chrome 48 and later
• Microsoft Internet Explorer 10 and later
• Microsoft Edge 20.10240 and later
• Mozilla Firefox 44 and later
• Opera 35 and later.
For successful operation, JavaScript should be enabled on the web browser. Make sure that
JavaScript has not been disabled by other software (such as virus protection or web user security
packages) running on your computer.
Wired or Wireless NIC (Ethernet or Wi-Fi Adapter)
Any computer that uses the router should be equipped with an Ethernet or Wi-Fi adapter (NIC). If
your computer is not equipped with such a device, install an Ethernet or Wi-Fi adapter prior to using
the router.
Wireless Connection
Wireless workstations from your network should be equipped with a wireless 802.11a, b, g, n, or ac
NIC (Wi-Fi adapter). In addition, you should specify the values of SSID, channel number and
security settings defined in the web-based interface of the router for all these wireless workstations.
Page 19 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router
and the Ethernet port of your PC.
2. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
3. Turn on the router by pressing the POWER button on its back panel.
Then make sure that your PC is configured to obtain an IP address automatically (as DHCP client).
Page 20 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
Obtaining IP Address Automatically (OS Windows 7)
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category
view (the Category value is selected from the View by drop-down list in the top right
corner of the window), choose the View network status and tasks line under the
Network and Internet section.)
Figure 3. The Control Panel window.
Page 21 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
3. In the menu located on the left part of the window, select the Change adapter settings
line.
Figure 4. The Network and Sharing Center window.
Page 22 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
4. In the opened window, right-click the relevant Local Area Connection icon and select
the Properties line in the menu displayed.
Figure 5. The Network Connections window.
Page 23 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
5. In the Local Area Connection Properties window, on the Networking tab, select the
Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Figure 6. The Local Area Connection Properties window.
Page 24 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
6. Make sure that the Obtain an IP address automatically and Obtain DNS server
address automatically choices of the radio buttons are selected. Click the OK button.
Figure 7. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the OK button in the connection properties window.
Page 25 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
Obtaining IP Address Automatically (OS Windows 10)
1. Click the Start button and proceed to the Settings window.
2. Select the Network & Internet section.
Figure 8. The Windows Settings window.
Page 26 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
3. In the Change your network settings section, select the Change adapter options
line.
Figure 9. The Network & Internet window.
Page 27 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
4. In the opened window, right-click the relevant Local Area Connection icon and select
the Properties line in the menu displayed.
Figure 10. The Network Connections window.
5. In the Local Area Connection Properties window, on the Networking tab, select the
Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Figure 11. The local area connection properties window.
Page 28 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
6. Make sure that the Obtain an IP address automatically and Obtain DNS server
address automatically choices of the radio buttons are selected. Click the OK button.
Figure 12. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the Close button in the connection properties window.
Page 29 of 209
DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Installation and Connection
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
2. Turn on the router by pressing the POWER button on its back panel.
3. Make sure that your Wi-Fi adapter is on. As a rule, modern notebooks with built-in wireless
NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to
your PC documents). If your PC is equipped with a pluggable wireless NIC, install the
software provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address automatically (as
DHCP client).
Page 30 of 209
Loading...