D-link DES-7200-2000DC, DES-7200-2, DES-7200-48P, DES-7200-48, DES-7200-4XG BROCHURE

DES-7200 Series

Chassis-Based Switches

Designed for Enterprise LAN and
MAN

+ Deployable as Core or Edge Switch
+ Enterprise-Class Software Functions
+ Support IPv6, NAT, MPLS, IPFIX

services

+ User-Selectable AC and DC Power

Supplies

Superior Performance

+ Dual Switch Fabrics Up to 384Gbps,

286Mpps Packet Forwarding

+ Bottleneck-Free Distributed Packet

Switching/Routing

+ Intelligent Line Cards with On-Board

L2/L3/L4 Switching Controllers

Flexible Modular Design

+ 6-Slot and 10-Slot Chasses
+ Scalable Expansion to 384

10/100/1000BASE-T, 384 PoE, 192 SFP
or 32 10-Gigabit Ports

+ Single or Dual Control Modules/Power

Supplies

High Resiliency

+ Dual Redundant Backup/Load-Sharing

Control Modules

+ Dual Redundant Backup Power

Supplies
+ Hot-Swappable Control and Line Cards
+ Replaceable Fan Modules
+ 802.1D/w/s Spanning Tree, 802.3ad

Link Aggregation/Backup Redundancy
+ Rapid Ether Ring Protection (RERP)
+ VRRP Support

D-Link’s DES-7200 series of chassis-based
switches are intelligent and high-performance
multi-layer LAN devices designed for enterprise
campus and metropolitan area networks (MAN).
They are ideal for deployment in environments
where uninterrupted running of network
applications and a high level of performance,
security and control are required.

Featuring a flexible modular architecture and
industry standard compliance, these switches
provide scalable expansion and a high level of
investment protection for businesses and telecom
carriers to deploy Gigabit and 10-Gigabit packet
switching and routing for office networking and
Ethernet-based Internet services to homes.

The DES-7200 series switches feature minimum
or zero network downtime, robust security
and real-time running of bandwidth-intensive
applications. Equipped with high-speed switch
fabrics, redundant backup/load sharing capability
and advanced software functions including
complete IPv6 support, these switches provide
the performance, high availability and future-proof
architecture suitable for applications of not just
today but well into the future.

Two DES-7200 series offers end-to-end
connectivity and granular application control
with two chasses supporting a wide range of port
modules:

DES-7206 6-slot chassis with:

-

2 slots for dual control modules with dual load-
sharing/redundant switch fabric of up to
192Gbps

-

4 slots for user-selectable port modules

-

2 slots for redundant backup power supplies

-

1 slot for fan module

-

Up to 192Gbps switch fabric

-

142Mpps packet forwarding rate

-

Up to 192 Gigabit ports

-

Up to 16 10-Gigabit ports

DES-7210 10-slot chassis with:

-

2 slots for dual control modules with dual load-
sharing/redundant switch fabric of up to
384Gbps

-

8 slots for user-selectable port modules

-

2 slots for redundant backup power supplies

-

1 slot for fan module

-

Up to 384Gbps switch fabric

-

286Mpps packet forwarding rate

-

Up to 384 Gigabit ports

-

Up to 32 10-Gigabit ports

Robust Security

+ Advanced L2/L3/L4 ACL
+ IP-MAC-Port Binding
+ Virus/Malicious Traffic Flooding

Prevention

+ CPU Protection Policy (CPP)

DES-7206

6-Slot Chassis

DES-7210

10-Slot Chassis

01

QoS & Bandwidth Management

+ Rate Limiting for End-Users

Subscribers’ CPE

+ Granular Bandwidth Control Down to

64Kbits for Ingress and Egress traffic

+ Traffic Classification

Versatile Management

+ Telnet/CLI/SNMP v1, v2c, v3

Management
+ RMON Monitoring
+ System/Alert Information, Interface

Management
+ Optional Dual Management Modules
+ 802.1v Protocol VLAN, Super VLAN,

Private VLAN, Double VLAN
+ L3 Protocol-Based Policies
+ Port Mirroring/Traffic Redirection

DES-7200 Series

Chassis-Based Switches

Flexible Modular Design

The DES-7200 series is available in two models:
the DES-7206 6-slot chassis with 4 open slots, and
the DES-7210 10-slot chassis with 8 open slots.
The open slots can be fitted with user-selectable
port modules. In addition to the open slots, 2
slots are reserved for redundant backup control
modules, 2 slots for redundant backup power
supplies, and slots for replaceable fan modules.
This modular architecture allows modules to be
gradually added to meet network growth, and
modules to be easily swapped anytime to fit
network requirement change.

Deployable as Core or Distribution Switch

Using a common set of modules for 10/100/
1000BASE-T ports, PoE support, SFP and 10­Gigabit uplinks, IT personnel can fit a DES-7200
switch with different port types and deploy it
either as a core switch or an aggregation (i.e.
distribution) switch. A DES-7200 core switch
provides numerous high-speed fiber backbones
for a campus and central office network, while
a DES-7200 aggregation switch can provide high
port density connections to workstations in an
office environment, or to subscribers’ CPE in a
densely populated Ethernet metro area network.

High Availability

Both the DES-7206 and the DES-7210 provides 2
slots for installation of control modules. Each control
module is equipped with its own switch fabric
hardware and management agent, and can be used
for redundant backup and sharing of network traffic
load and management tasks. Adding to this feature
are 2 redundant backup power supplies and hot
swappable fan module to create very highly available
chassis-based devices suitable for mission-critical
network applications.

High Performance

The DES-7206 6-slot switch provides, a switch
capacity of up to 192Gbps and a system performance
of up to 142Mpps. The DES-7210 10-slot switch
provides, a switch capacity of up to 384Gbps and
system performance of up to 286Mpps. To make
use of this high-performance hardware, these
switches utilize a distribution switching method
which has each line card (the port module that
directly connects to the network nodes) intelligently
determine the switch path for each data packet.
The switches synchronize the switching and routing
information between the control cards and the line
cards to map out the fastest data transfer
path. With each line card capable of performing
L2/3/4 on-board packet switching without relying on
the control cards, the DES-7200 switches can deliver
very fast packet forwarding at almost zero-wait
speed.

High Port Densities

Port densities can reach 192 Gigabit or 16 10-Gigabit
ports per 6-slot chassis, or 384 Gigabit or 32 10­Gigabit ports per 10-slot chassis. All port modules are
hot-swappable, and can be used for in either chassis
type without the need to change any hardware or
software settings.

Application Convergence

The DES-7200 combines high-speed hardware with
software functions like prioritized traffic QoS and
multicast routing to deliver the performance suitable
for real-time applications such as Internet phone,
streaming multimedia and TV. In addition, these
switches offer Power over Ethernet (PoE) solutions
to provide both electrical power and network
connectivity to PoE-capable devices, such as IP
phones and wireless AP, and are ideal for large-scale
enterprise edge deployment. An example of this
application convergence would be VoIP for mobile
users via wireless access points connected through
the DES-7200 switches.

02

DES-7200 Series

Chassis-Based Switches

Complete IPv6 Support

The DES-7200 provides complete support for IPv6
to accommodate the potential huge increase in
number of users and geographical needs of the
Internet expansion. It addresses the requirements
of emerging applications such as Internet-enabled
wireless devices, home and industrial appliances,
Internet-connected transportations, integrated
telephony services, sensors networks, and
distributed computing or gaming. The use of globally
unique IPv6 addresses simplifies the mechanisms
used for reach-ability and end-to-end security for
network devices, functionality that is crucial to the
applications and services that are driving the demand
for IP addresses

Enterprise-Wide Security

The DES-7200 provides not only network access
security but also protection against virus and
worm attacks. Access security is provided through
comprehensive policy-based ACL, port security,
IP-MAC-Port binding features and Defeat IP Scan,
while attacks hidden behind control protocols are
thwarted to prevent the switch’s CPU from being
overwhelmed with unnecessary tasks which can
cause degradation to a network’s performance. The
DES-7200 extends security to network management
via such functions as SSH v2 and SNMP v3 with
authentication and encryption of management traffic.

their current environments, as MPLS is independent
of access technologies.

NAT Traversal and Accounting

The DES-7200 provides Layer 3 IP packet routing
with Network Address Translation (NAT) useful for
enterprise networks as well as Internet providers
offering Ethernet metro area network services. With
dynamic IP address generation for users in a campus
LAN and subscriber CPEs in a carrier network, the
DES-7200 can be deployed for end-to-end services
without incurring the cost of attaching external
routers to packet switching devices. In addition, the
DES-7200 provides 802.1X access control with period
accounting, multiple accounting and statistics,
bandwidth restriction and RADIUS server support,
enabling carriers to implement complete Ethernet­based Internet services to home customers.

QoS & Bandwidth Management

The DES-7200 supports numerous advanced traffic
management options including flow-based bandwidth
control and broadcast/multicast storm control. It
provides egress traffic bandwidth control with
minimum granularity of 64Kbits. Combining Rate
Limiting applicable to categories of subscriber CPE
and access control-based accounting, the DES-7200
provides the functions useful for carriers offering
services to home users in a metropolitan Ethernet
network.

MPLS Functions

With the use of Advanced Service Engine (ASE), the
DES-7200 supports many advanced Multi-protocol
Label Switching (MPLS) functions, including
MPLS label management, LDP, MPLS L2/L3 VPN and
VPLS, enabling enterprises and service providers
to build next-generation intelligent networks that
deliver a wide variety of advanced, value-added
services over a single infrastructure. This solution
can be integrated seamlessly over any existing
infrastructure, such as IP, Frame Relay, ATM, or
Ethernet. Subscribers with differing access links can
be aggregated on an MPLS edge without changing

Comprehensive Management

To maximize management uptime, the DES-7200
provides optional dual redundant backup management
agents in the same chassis. It offers a comprehensive
set of management features to provide enterprise­wide visibility and control to network administrators
for configuration, access/traffic monitoring and
troubleshooting. These features are accessible
through a CLI, Telnet or SNMP console. RMON
monitoring is supported, and complete debug,
system information, alert information and interface
management are provided.

Technical Specifications

Hardware (Chassis) 7206 7210

Chassis Slots 6 10

Fixed Slots (for Control Modules) 2 2

Open Slots (for Port Modules) 4 8 (vertical)

Max. Switch Capacity * 192 Gbps 384 Gbps

Max. Packet Forwarding Rate * 142 Mpps 286 Mpps

03

DES-7200 Series

Module Support Matrix

Modules Port Type Module Support

Modules 10/100/1000Base-T 10/100/1000Base-T/SFP

Combo

CPU Engines

7200-CM1

7200-CM2

7200-CM3^

7200-CM4^

- - - - √

- - - - √

- - - - √

- - - - √

Advanced Service Engines

7200-ASE1**

7200-ASE2**

7200-ASE3

7200-ASE4**

- - - - √ √

- - - - √ √

- - - - √ √

- - - - √ √

SFP 10G XFP DES-7206 DES-7210

LAN Interface Modules

7200-24

7200-24G

7200-24P

7200-48

7200-48P

7200-2XG

7200-4XG

12

-

12(PoE) 12(PoE) - -

44 4 - -

44(PoE) 4(PoE) - -

- - - 2

- - - 4

Enhanced LAN Interface Modules

7200-24GE

7200-24G2XGE**

7200-48E**

- -

- -

48

Power Supplies

7206-1200AC

7206-1200DC

7206-2000AC

7206-2000DC

- -

- -

- -

- -

Fan Tray Modules

7206-Fan

7210-Fan

- -

- -

12 - -

12 12 -

24^^ -

24 2

- - -

- -

- -

- -

- -

- -

- -

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√

√

Notes:
* Note: Figures are based on the usage of 2 control modules.
** Note: Available in future
^ Note: Support Advanced Service Engine(ASE)
^^Note: Support dual speed 100/1000M SFP

04

Maximum Port Density 7206 7210

10/100/1000BASE-T Ports 192 384

10/100/1000BASE-T Ports with PoE 192 384

SFP Slots 96 192

10-Gigabit Ethernet XFP Slots 16 32

Fan Tray Modules 7206-Fan 7210-Fan

Number of DC Fans 6

Power Supply Modules 7200-1200AC 7200-2000AC 7200-1200DC 7200-2000DC

AC Input Voltage

DC Input Voltage - -

Total Power Output (Watts)

90 to 264 VAC @ 40 - 60Hz 90 to 264 VAC @ 40 - 60Hz

1200 1200 output @ 90 - 176 VAC

2000 output @ 176 - 264 VAC

- -

-36 to -72 VDC -36 to -72 VDC

1200 2000

05

L2 Features

+ MAC Address Table
16K per standard I/O module
32K per enhanced I/O module
+ ARP
Static ARP
Configurable ARP aging time
+ Jumbo Frame up to 9,216 Bytes
+ IGMP snooping
1K Groups
IGMP Proxy
+ Spanning Tree

802.1D STP

802.1w RSTP

802.1s MSTP
+ Rapid Ether Ring Protection (RERP)
Support up to 16 domains
Recovering L2 traffic in 500ms
+ Rapid Link Detection Protocol (RLDP)
+ 802.3ad Link Aggregation
128 Trunk Groups, 8 Ports Per Group
+ Port Mirroring:
One-to-One
Multi-to-One
Tx/Rx/Both port mirroring
+ Head of Line Blocking Prevention

VLAN

+ 802.1Q Tagged VLAN
+ 802.1v
+ VLAN Group: 4K
+ Port-Based VLAN
+ Super VLAN
+ Private VLAN
+ Double VLAN (Q-in-Q)
Port-Based Q-in-Q
Selective Q-in-Q

L3 Features

+ Max 2K IP interface
+ Secondary IP
+ VRRP
+ IPv6 Tunneling
Manual Tunnel
ISATAP
6to4
+ IPv6 Ready Phase 2

L3 Routing

+ Routing Entries: 12K 192K (With ASZ3)
+ Static Routes: Max. 1K
+ Policy Based Route
+ Multi Path Route:
ECMP /WCMP
+ RIP v1/v2
+ RIPng (IPv6)*
+ OSPF
OSPF v2
OSPF v3 (IPv6)
Stub/NSSA Area
+ BGP v4
+ BGP+ v4 (IPv6)

DES-7200 Series

TECHNICAL SPECIFICATIONS

+ PIM-SM
+ PIM-SM v6*
+ PIM-SSM
+ PIM-SSM v6*
+ IGMP v1/v2/v3
+ PIM Snooping

QoS (Quality of Service)

+ 802.1p Class of Service (CoS)
+ 8 queues
+ Queue Handling:
Strict
Weighted Round Robin (WRR)
ST+WRR
+ CoS Based on:
VLAN ID

802.1p Priority
MAC Address

MPLS/VPLS

+ VRF (Enhanced I/O module or 7200-ASE3 is required)
+ MPLS Label Management (7200-ASE3 is required)
+ LDP (7200-ASE3 is required)
+ MPLS L3 VPN (7200-ASE3 is required)
+ VPWS* (7200-ASE3 is required)
+ VPLS* (7200-ASE4 is required)

NAT* (7200-ASE1 is required)

IPFIX (7200-ASE2 is required)

+ Support 128K IPFIX entries

ACL (Access Control List)

+ Ingress / Egress**ACL
+ ACL Based on

802.1p Priority
VLAN ID
MAC Address
IP Address or IP Prefix
DSCP/IP Precedence
IP Protocol Type
TCP/UDP Port Number
Combination of the above
+ Time-based ACL

Security

+ CPU Protection Policy (CPP)
+ SSH v1.5/v2
+ Port Security up to 16 MAC address per port
+ Global MAC-IP Binding
+ Defeat IP Scan
+ IP-MAC-Port Binding

AAA

+ 802.1X
Port-Based Access Control
MAC-Based Access Control
Dynamic VLAN Assignment
+ Accounting
Period Accounting
Multiple Accounting
+ RADIUS

+ TFTP
+ DHCP Server
+ DHCP Relay
+ DHCP Relay option 82
+ XModem
+ SNMP v1/v2c/v3
+ SNMP Trap
+ System Log
+ RMON v1
Support 1,2,3,9 Groups
+ DNS Client
+ Debug
+ NTP/SNTP
+ File System
Flash storage media
Multiple Firmware
Multiple Configuration
+ System Status LED
+ System Alert

MIB/IETF Standard

+ RFC1213 MIB-II
+ RFC1493 Bridge MIB
+ RFC1901, 1907 SNMPv2 MIB
+ RFC1157, 2571~2576 SNMP MIB
+ RFC1271, 2819 RMON MIB
+ RFC3569 PIM-SSM MIB
+ D-Link Private MIB
+ RFC2362 PIM-SM
+ RFC2338, 2787 VRRP
+ RFC1075 DVMRP
+ RFC2474~2475 DiffServ
+ RFC2674 802.1p
+ RFC2138~2139, 2865~2866 RADIUS
+ RFC1370, 1587, 1765, 1850,2328, 2370 OSPF
+ RFC1771, 1997, 2439, 2796, 2842, 2918 BGP
+ RFC1542, 2131, 3046 DHCP
+ RFC3069 Super VLAN
+ RFC3411~3417 SNMP
+ RFC768 UDP
+ RFC791 IP
+ RFC793 TCP
+ RFC854 Telnet
+ RFC1305 NTP
+ RFC1350 TFTP
+ RFC1769 SNTP
+ RFC2096 IP FDB MIB
+ RFC1724 RIP v2 MIB
+ RFC2933 IGMP v3 MIB

* Function available in future firmware upgrade
** Enhanced LAN Interface Module is required

L3 Multicasting

+ PIM-DM
+ PIM-DM v6 *

Management

+ Command Line Interface (CLI)
+ Telnet Server

06

DES-7200 Series

Product Description

Chassis Kits

DES-7206-Base 6 slots chassis base with Fan module

without Power supply

DES-7210-Base 10 slots chassis base with Fan module

without Power supply

LAN Interface Modules

7200-24 12 ports 10/100/1000M and 12 ports combo

10/100/1000M / SFP module

7200-24G 12 ports SFP and 12 ports combo

10/100/1000M / SFP module

7200-48 48 ports 10/100/1000M module and

4 ports combo10/100/1000M / SFP module

7200-2XG 2 ports XFP module
7200-4XG 4 ports XFP module
7200-24P 12 ports 10/100/1000M and 12 ports combo

10/100/1000M / SFP module with PoE function

48 ports 10/100/1000M module and

7200-48P

4 ports combo10/100/1000M / SFP module
with PoE function

Enhanced LAN Interface Module

7200-24GE 24 ports 100/1000M SFP module
7200-24G2XGE* 24 ports SFP and 2 ports XFP module

7200-48E* 48 ports 10/100/1000M module

Power Supplies

7200-1200AC 1200W redundant AC power supply
7200-1200DC 1200W redundant DC power supply
7200-2000AC 2000W redundant AC power supply
7200-2000DC 2000W redundant DC power supply

CPU Engines

7200-CM1 CPU module for DES-7206 chassis, 96G

switching capacity

7200-CM2 CPU module for DES-7210 chassis,

192G switching capacity

7200-CM3 CPU module for DES-7206 chassis,

96G switching capacity, support
Advanced Service Engine(ASE)

7200-CM4 CPU module for DES-7210 chassis,

192G switching capacity, support
Advanced Service Engine(ASE)

Advanced Service Engine

7200-ASE1 * Advanced Service Engine for NAT support
7200-ASE2 * Advanced Service Engine for IPFIX support
7200-ASE3 Advanced Service Engine for MPLS support,

192K H/W routing table and 24K L3 FDB

7200-ASE4 * Advanced Service Engine for VPLS support

Accessories

7200-512RAM 512MB additional RAM for CPU models CM3/CM4.

Optional Products

Optional Management Software

DV-600P D- Vi ew 6. 0 N e tw or k M an ag em en t S of tw ar e

DV-600S D-View 6.0 Network Management Software

Standard Edition

Professional Edition

Optional 10-Gigabit XFP Transceivers

DEM-421XT XFP transceiver, 10GBASE-SR standard,

multi-mode fiber, max. distance 300 m, 3.3/5V

DEM-422XT XFP transceiver, 10GBASE-LR standard,

single-mode fiber, max. distance 10 km, 3.3/5V

DEM-423XT XFP transceiver, 10GBASE-ER standard,

single-mode fiber, max. distance 40 km, 3.3/5V

Optional SFP Transceivers

DEM-310GT SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 10 km, 3.3V

DEM-311GT SFP transceiver, 1000BASE-SX standard,

multi-mode fiber, max. distance 550m, 3.3V

DEM-312GT2 SFP transceiver 1000BASE-SX standard,

multi-mode fiber, max. distance 2km, 3.3V

DEM-314GT SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 50km, 3.3V

DEM-315GT SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 80km, 3.3V

DEM-330T WDM SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 10 km, 3.3V,
Tx wavelength 1550 nm, Rx wavelength 1310 nm

DEM-330R WDM SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 10 km, 3.3V,
Tx wavelength 1310 nm, Rx wavelength 1550 nm

DEM-331T WDM SFP transceiver, 1000BASE-LX standard,

single-mode fiber, max. distance 40 km, 3.3V,
Tx wavelength 1550 nm, Rx wavelength 1310 nm

DEM-331R WDM SFP transceiver 1000BASE-LX standard,

single-mode fiber, max. distance 40 km, 3.3V,
Tx wavelength 1310 nm, Rx wavelength 1550 nm

DEM-211 SFP transceiver, 100BASE-FX Multi-

mode fiber, max. distance 2Km, 3.3V

DEM-210 SFP transceiver, 100BASE-FX Single-

mode fiber, max. distance 15Km, 3.3V

* Note: Available in future

No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan

D-Link is a registered trademark of D-Link Corporation/D-Link Systems Inc.

Specifications subject to change without prior notice.

All other trademarks belong to their proprietors.

D-Link Corporation

Release 07 (Oct. 2008)

07