DJI Phantom Flying Flowchart User Manual
PHANTOM Flying Flowchart V1.0 (Simplified Version)
This flowchart is aiming at help you to get familiar with the flying procedures of PHANTOM, please read the
Manual carefully to get the operation details. Its corresponding Firmware Version is V3.0.
IOC On &
30s after power on
LED：Blink
Green Quickly
Record the
forward
direction.
LED：Blink Green Quickly
Record the Home Point
Recording
is ok.
Any GPS Satellite Number
ATTI. Mode GPS ATTI. Mode
though you select the GPS ATTI. Mode
and LED blinks in the GPS ATTI. Mode,
the PHANTOM will work in ATTI. Mode.
GPS Satellite Number≥6
&IOC On
Recording is ok
First Level
Protection Alert
Switch on the transmitter, and
then power on the PHANTOM.
System Start
& Self-check
LED：Mode +GPS Satellite
Number+6Yellow
6Yellow means warming up
IOC Off &
Warming up is ok.
LED：Mode +
GPS Satellite Number
GPS Satellite Number≥6
Important: At any moment after power
on, if the GPS Satellite number is less
than 6 and last for at least 10s; even
Start Motors
Home Point
IOC Starting
Flying
Course Lock
IOC Ending
FailSafe
Senser Error Too Big
Compass Error Too Big
LED：Mode +GPS Satellite
Number+6Green
6Green means motion detection.
LED: Blink Yellow
Quickly
LED:Red+
Green+Yellow
LED:Red+Yellow
If Red LED appears in the last four
green flashes, the autopilot system
Method of Start Motor
GPS Satellite
Number<6
FailSafe
Home Lock
Important: When you switch to ATTI. Mode, the
main controller will disengage enhanced FailSafe
GPS Satellite
Number≥6
GPS Satellite Number≥6, in GPS ATTI. Mode,
Distance between the Home Point and
PHANTOM>10m.
Keep Leveling
&Landing
mode, you can re-gain control of aircraft.
Return to the
Home Point
cannot work.
Important: If PHANTOM is
moved after power on and
before the motors start-up,
that is normal.
If it is stationary on the
ground, please try the IMU
Basic Calibration.
Second Level
Protection Alert
&Height Descent
Power off the PHANTOM, and
Landed
then switch off the transmitter
Green Part means normal procedures:
Pink Text tells the details.
Red Part means possible abnormal situation.
Yellow Part is possible in normal or abnormal situation,
require you to confirm by the Text for details.
Blue Part is the condition of the normal situation.
Purple Part is the condition of the abnormal situation.
means regular situation.
means selectable or possible situation.
Loading...