DJI Mavic 2 Enterprise User Manual [ru]

Download

MAVIC 2 ENTERPRISE

User Manual

2018.10

v1.0

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat

Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document

This document supports high resolution printing.

Using This Manual

Legend

Warning Important Hints and Tips Reference

Read Before the First Flight

Read the following documents before using the MAVICTM 2 Enterprise:

1. Mavic 2 Enterprise In the Box

2. Mavic 2 Enterprise User Manual

3. Mavic 2 Enterprise Quick Start Guide

4. Mavic 2 Enterprise Disclaimer and Safety Guidelines

5. Mavic 2 Enterprise Intelligent Flight Battery Safety Guidelines

It is recommend to watch all tutorial videos on the ocial DJI Disclaimer and Safety Guidelines before rst time use. Prepare for your rst ight by reviewing the Mavic

2 Enterprise Quick Start Guide and refer to this Mavic 2 Enterprise User Manual for more details.

website and read the Mavic 2 Enterprise

Video Tutorials

Go to the address below or scan the QR code on the right to watch the Mavic 2 Enterprise

tutorial videos, which demonstrate how to use the Mavic 2 Enterprise safely:

http://www.dji.com/mavic-2-enterprise/info#video

Download the DJI Pilot App

Be sure to use the DJI Pilot app during ight. * Scan the QR code on the right to download the latest version. The Android version of DJI Pilot is compatible with Android v5.0 and later. The iOS version of DJI Pilot is compatible with iOS v10.0 and later.

* For increased safety, ﬂight is restricted to a height of 98.4 ft (30 m) and range of 164 ft (50 m) when not connected

or logged into the app during ﬂight. This applies to DJI Pilot and all apps compatible with DJI aircraft.

Download DJI Assistant 2 for Mavic

Download DJI ASSISTANTTM 2 for Mavic at http://www.dji.com/mavic-2-enterprise/info#downloads.

Contents

Using This Manual

Legend

Read Before the First Flight

Video Tutorials

Download the DJI Pilot App

Download DJI Assistant 2 for Mavic

Product Prole

Introduction

Preparing the Mavic 2 Enterprise

Preparing the Remote Controller

Aircraft Diagram

Activation

Aircraft

Flight Modes

Aircraft LEDs and Status Indicator

Return to Home

Vision Systems and Infrared Sensing Systems

Advanced Pilot Assistance Systems

Flight Recorder

Password Protection

Attaching and Detaching the Propellers

Intelligent Flight Battery

Gimbal and Camera

DJI AirSense

Modular Accessories

Remote Controller

Using the Remote Controller

Linking the Remote Controller

DJI Pilot App

Manual Flight

Mission Flight (Coming soon)

Album

DJI FlightHub

Flight

Flight Environment Requirements

Flight Limits and GEO Zones

Pre-Flight Checklist

Starting/Stopping the Motors

Test Flight

Appendix

Specications

Calibrating the Compass

Firmware Updates

Remote Controller LCD Screen Menu Information

After-Sales Information 57

Product Prole

This section introduces

Enterprise

the aircraft and remote controller.

and lists the components of

Mavic 2

Product Prole

Introduction

The DJI Mavic 2 Enterprise features omnidirectional Vision Systems and Infrared Sensing Systems. DJI signature technologies such as Obstacle Sensing and the Advanced Pilot Assistance System, help you capture complex shots eortlessly. Additional features like the built-in AirSense makes you aware of

your surrounding airspace, and password protection helps you maintain secure access to your aircraft

and protect your data. The Mavic 2 Enterprise also has attachable modular accessories like the M2E

Spotlight, M2E Beacon and M2E speaker that are purpose-built for various industrial applications.

The Mavic 2 Enterprise features a fully stabilized 3-axis gimbal camera that shoots 4K video,

12-megapixel photos, supports 2x optical zoom, 24-48 mm lens, and supports filters. The Mavic

2 Enterprise uses the latest technology to increase stability and footage quality, reducing the angle

vibration range to within ±0.005°.

Built into the remote controller is DJI’s long-range transmission technology OCUSYNCTM 2.0, oering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to DJI Pilot on your

mobile device at up to 1080p. The remote controller works at both 2.4 GHz and 5.8 GHz, and it can

select the best transmission channel automatically without any latency. The aircraft and camera can

easily be controlled using the onboard buttons. An onboard LCD screen gives real-time aircraft data

information, and the detachable control sticks make the remote controller easier to store. The maximum

run time is 2 hours and 15 minutes. The Mavic 2 Enterprise boasts a maximum ight speed of 44.7 mph (72 kph) and a maximum ight time of 31 minutes.

Maximum flight time was tested in an environment with no wind while flying at a consistent 15.5

mph (25 kph) and the maximum flight speed was tested at sea level altitude with no wind. These values are for reference only.

The remote controller reaches its maximum transmission distance (FCC) in a wide-open area

with no electromagnetic interference at an altitude of about 400 ft (120 m). The maximum runtime was tested in a laboratory environment. This value is for reference only.

5.8 GHz is not supported in some regions. Please observe the local laws and regulations.

Preparing the Mavic 2 Enterprise

Preparing the Aircraft

All aircraft arms are folded before the aircraft is packaged at the factory. Follow the steps below to

unfold the aircraft.

1. Remove the gimbal cover from the camera.

2. Unfold the front arms, and then unfold the rear arms.

Mavic 2 Enterprise User Manual

*Attach the gimbal cover when not in use.

1)Hold the gimbal in place and insert gimbal clamp between the aircraft and the gimbal.

2) Make sure the hooks on the Gimbal Protector are locked in the grooves of the aircraft, then lower the Gimbal Protector over the gimbal and secure with the buckle. The buckle will click when it is

securely attached.

Gimbal clamp

Grooves Hooks

3. Attaching the propellers.

Attach the propellers marked white to the motors with white marks. Press the propeller down onto

the motors and turn until it is secure. Attach the other propellers to the unmarked motors. Unfold all

the propeller blades.

4. All Intelligent Flight Batteries are in Hibernation mode before shipment to ensure safety. Use the

provided AC power adapter to charge and activate Intelligent Flight Batteries for the rst time. To charge an Intelligent Flight Battery after ight, remove it from the aircraft and attach it to the AC

power adapter.

Power Outlet

100-240 V

Unfold the front arms and propellers before unfolding the rear arms.

It is normal if there is friction on the arms and aircraft due to the firmly folding design of the

Mavic 2 Enterprise aircraft.

Be sure the gimbal cover is removed and all arms and propellers are unfolded before powering

on the aircraft. Otherwise, it may affect the aircraft self-diagnostics.

Charging Time:

~1 hour 30 minutes

Mavic 2 Enterprise User Manual

Preparing the Remote Controller

1. Unfold the mobile device clamps and the antennas.

2. Remove the control sticks from their storage slots on the remote controller and screw them into

place.

3. Choose an appropriate RC cable based on the type of mobile device. A cable with a Lightning

connector is connected by default to the cable slider. Micro USB and USB-C cables are also

included in the packaging. Connect the end of the RC cable to your mobile device. Secure your

mobile device by pushing both clamps inward.

Refer to the gure below for how to replace the RC cable. The RC cable slider must be replaced if using

a USB-C RC cable.

You can also connect your mobile device to the remote controller using a USB cable if the mobile device is too big to place into the clamps. Plug one end of the cable into your mobile

device and the other end into the USB port on the bottom of the remote controller.

Do not use the Micro USB and USB ports simultaneously for video linking. Remove the cable from one port before connecting a device to the other port for video linking.

Aircraft Diagram

2 3

11 12

13 14

15 16 17

Mavic 2 Enterprise User Manual

1. Forward Vision System

2. Propellers

3. Motors

4. Front LEDs

5. Antennas

6. Gimbal and Camera

7. Backward Vision System

8. Aircraft Status Indicator

9. Battery Buckles

10. Lateral Vision System

11. USB-C Port

12. Link Button/Linking Status Indicator

13. Extended Port (to connect accessories)

14. Extended Port Cover

15. Battery Level LEDs

16. Power Button

17. Intelligent Flight Battery

18. Upward Infrared Sensing System

19. Downward Vision System

20. microSD Card Slot

21. Downward Infrared Sensing System

22. Auxiliary Bottom Light

(can be used as a beacon in low

light conditions)

19 21

22 19

Mavic 2 Enterprise User Manual

2 3

4 5

1. Antennas

Relay aircraft control and video wireless

signals.

2. Return to Home (RTH) Button

Press and hold the button to initiate RTH.

The aircraft returns to the last recorded Home

Point. Press again to cancel RTH.

3. LCD Screen

Displays the aircraft and remote controller

system status.

4. Removable Control Sticks

The removable control sticks are easy to

store. The default ight control is set to Mode

2. Set the ight control mode in DJI Pilot.

5. Flight Pause Button

Press to make the aircraft brake and hover in place (only when GPS or Vision System are

available).

6. Control Sticks Storage Slot

For storing the control sticks.

7. Mobile Device Clamps

Securely mount your mobile device onto the

remote controller.

8. Reserve Video-Downlink Port (USB)

Connect to a mobile device for video

downlink via a standard USB cable.

9. 5D Button

The default conguration is listed below. The conguration can be adjusted based on your preferences in DJI Pilot.

Left: Decrease EV value.

Right: Increase EV value.

Up: Recenter gimbal/gimbal downward.

Down: Recenter gimbal/gimbal downward.

Press down: Bring up DJI Pilot Intelligent

Flight menu.

10. Flight Mode Switch

Switch between S-mode, P-mode, and

T-mode.

11. Power Button

Press once to check the current battery level. Press once, then again, and hold to turn on/o the remote controller.

12. C1 Button (Customizable)

The default configuration is center focus.

Adjust the conguration in DJI Pilot based

on your preferences.

13. Gimbal Dial

Controls the camera's tilt.

14. Video-Downlink/Power Port (micro USB)

Connect to a mobile device for video

linking via the RC cable. Connect to the

AC Power Adapter to charge the remote

controller battery.

15. Record Button

Press to start recording video. Press again

to stop recording.

16. Focus/Shutter Button

Press halfway to autofocus. Press once

to take photos according to the mode

selected in the DJI Pilot.

Mavic 2 Enterprise User Manual

17. Zoom Adjustment Dial

Turn to adjust the zoom of the camera.

18. C2 Button (Customizable)

The default configuration is playback. Adjust

the configuration in DJI Pilot based on your

preferences.

Activation

The Mavic 2 Enterprise requires activation before rst time use. Follow the onscreen guide to activate the Mavic 2 Enterprise using DJI Pilot.

Aircraft

This section introduces the ight

controller, Intelligent Flight Battery, and the Forward, Backward and Downward Vision Systems.

Aircraft

The Mavic 2 Enterprise contains a ight controller, vision systems, video downlink system, propulsion system, and an Intelligent Flight Battery. Refer to the aircraft diagram in the Product Prole section.

Flight Modes

The Mavic 2 Enterprise has three ight modes, plus a fourth ight mode that the aircraft switches to in

certain circumstances:

P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes GPS and

the Vision Systems to locate itself, stabilize, and navigate between obstacles.

When the Forward and Backward Vision Systems are enabled and lighting conditions are sucient, the maximum ight altitude angle is 25°, the maximum forward ight speed is 31 mph (50 kph), and the maximum backward ight speed is 27 mph (43 kph).

Note: P-mode requires larger stick movements to achieve high speeds.

The aircraft automatically changes to Attitude (ATTI) mode when the Vision Systems are unavailable or

disabled and when the GPS signal is weak or the compass experiences interference. When the Vision

Systems are unavailable, the aircraft cannot position itself or brake automatically, which increases

the risk of potential flight hazards. In ATTI mode, the aircraft may be more easily affected by its

surroundings. Environmental factors such as wind can result in horizontal shifting, which may present

hazards, especially when ying in conned spaces.

S-mode (Sport): In S-mode, the Obstacle Sensing function is disabled and the aircraft uses GPS and the Vision Systems for positioning. The maximum ight speed is 44.7 mph (72kph). The aircraft cannot

sense or avoid obstacles.

Note: In S-mode, aircraft responses are optimized for agility and speed making it more responsive to

stick movements.

T-mode (Tripod): T-mode is based on P-mode and the ight speed is limited, which makes the aircraft

more stable during shooting. The maximum flight speed, maximum ascend speed and maximum

descend speed are 1 m/s.

The Obstacle Sensing function and the Upward Infrared Sensing System are disabled in S-mode,

which means the aircraft cannot sense obstacles on its route automatically.

The aircraft’s maximum speed and braking distance significantly increase in S-mode. A minimum

braking distance of 98.4 ft (30 m) is required in windless conditions.

Descent speed significantly increases in S-mode.

The aircraft’s responsiveness significantly increases in S-mode, which means a small stick

movement on the remote controller translates into the aircraft moving a large distance. Be vigilant and maintain adequate maneuvering space during flight.

Use the Flight Mode switch on the remote controller to switch between Flight Modes. Enable

Multiple Flight Modes in DJI Pilot to switch between Flight Modes.

Mavic 2 Enterprise User Manual

Aircraft LEDs and Status Indicator

The Mavic 2 Enterprise has Front LEDs and Aircraft Status Indicators as shown in the gure below.

Front LEDs

Aircraft Status Indicator

The Front LEDs show the orientation of the aircraft and glow solid red when the aircraft is turned on to

indicate the front of the aircraft (they can be turned o in the DJI Pilot).

The Aircraft Status Indicators communicate the status of the aircraft’s ight control system. Refer to the

table below for more information about the Aircraft Status Indicators. The Aircraft Status Indicators also

ash when the Home Point is being recorded, as described in the Return to Home section.

Aircraft Status Indicator States

Color Blinking/Solid Description of Aircraft State

Normal States

Alternating red,

green, and yellow

Blinking

Yellow Blinks four times Warming up

Green Blinking slowly P-mode with GPS

Green

Periodically blinks

twice

Yellow Blinking slowly

Green Blinking quickly Braking

Warning States

Yellow Blinking quickly Remote controller signal lost

Red Blinking slowly Low battery

Red Blinking quickly Critically low battery

Red Blinking IMU error

Red Solid Critical error

Alternating red

and yellow

Blinking quickly Compass calibration required

Turning on and performing self-diagnostic

tests

P-mode with Forward and Downward Vision

Systems

No GPS, Forward Vision System or

Downward Vision System

For missions that require an unobtrusive ight, you can simply enter the setting of the camera and

select Smart Arm LEDs in DJI Pilot to turn all the LED lights o.

Mavic 2 Enterprise User Manual

Return to Home

The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are

three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three

scenarios in detail.

GPS

If a strong GPS signal was acquired before takeoff, the Home Point is

Home Point

the location from which the aircraft launched. The GPS signal strength is indicated by the GPS icon ( ). The Aircraft Status Indicator will blink green quickly when the Home Point is recorded.

Smart RTH

If the GPS signal is suciently strong, Smart RTH can be used to bring the aircraft back to the Home Point. Smart RTH is initiated by pressing and holding the RTH button on the remote controller.

Exit Smart RTH by pressing the RTH button on the remote controller.

Low Battery RTH

Low Battery RTH is triggered when the Intelligent Flight Battery is depleted to the point that the safe

return of the aircraft may be aected. Return home or land the aircraft immediately when prompted. DJI Pilot displays a warning when the battery level is low. The aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The user can cancel RTH by pressing the RTH button or Flight Pause button on the remote controller.

If RTH is cancelled following a low battery level warning, the Intelligent Flight Battery may not have

enough charge for the aircraft to land safely, which may lead to the aircraft crashing or being lost. The

thresholds for the battery level warnings are automatically determined based on the aircraft’s current altitude and distance from the Home Point.

The aircraft will land automatically if the current battery level can only support the aircraft long enough

to descend from its current altitude. The user cannot cancel the auto landing but can use the remote

controller to alter the aircraft’s orientation during the landing process.

Description

Critically low battery level warning

(Red)

Low battery level warning

DJI Pilot Battery Level Indicator Bar

Battery level is sufficient

(Yellow)

Charge required to

return to Home Point

(Green)

Remaining flight time

12:29

Mavic 2 Enterprise User Manual

The colored zones and markers on the DJI Pilot battery level indicator bar reect the estimated

remaining ight time. They automatically adjust according to the aircraft’s current location and status.

If the current battery level can only support the aircraft long enough to descend from its current

altitude, a critically low battery level warning triggers and the aircraft descends and lands automatically. This cannot be canceled. If there is a danger of a collision, push the throttle up and try to navigate away.

If the battery level is sufficient, the battery level indicator bar in DJI Pilot displays the estimated

remaining flight time based on the current battery level.

Warning Instructions

Remaining battery

level supports RTH.

Remaining

battery level

supports

Emergency RTH

(when in RTH,

Low

Battery

Level

Critically

Low

Battery

Level

with a normal RC

signal, and at an

altitude higher

than 50 m).

Remaining

battery level

supports

Emergency

Landing (when

in RTH with

a normal RC

signal).

Aircraft lands

after 10 seconds

(when flying

normally with

a critical low

battery level).

Aircraft lands

automatically

(when flying

normally with an

extremely critical

low battery

level).

Aircraft Status Indicator

Blinks red

slowly

Blinks red

quickly

DJI Pilot App Actions

Choose RTH or

resume normal flight.

Choose Emergency

RTH or resume RTH.

Aircraft lands. Action

cannot be canceled.

Aircraft lands after

10 seconds. Action

cannot be canceled.

Aircraft lands

immediately. Action

cannot be canceled.

Select an option. If no action

is taken, the aircraft will enter

RTH.

Select an option.

Emergency RTH (aircraft

descends to 50 m and

returns to the Home Point)

or resume RTH (aircraft

flies to Home Point without

descending). If no action is

taken, the aircraft will enter

Emergency RTH.

Aircraft lands immediately.

Aircraft lands after 10

seconds.

Aircraft lands immediately.

Mavic 2 Enterprise User Manual

Failsafe RTH

The Forward Vision System allows the aircraft to create a real-time map of its flight route as it flies.

If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH

automatically activates after the remote control signal is lost for more than two seconds.

When Failsafe RTH is activated, the aircraft starts to retrace its original ight route home. If the remote

control signal is re-established within 60 seconds of Failsafe RTH being activated, the aircraft hovers at

its present location for 10 seconds and waits for pilot commands. The user may press the RTH button

on the remote controller to cancel Failsafe RTH and retake control. If no pilot command is given, the

aircraft ies to the Home Point in a straight line. If the remote control signal is still lost 60 seconds after activating Failsafe RTH, the aircraft stops retracing its original ight route and ies to Home Point in a

straight line.

RTH Procedure

Smart RTH, Low Battery RTH, and Failsafe RTH all follow the RTH procedure:

1. The aircraft adjusts its orientation.

2. a. If the aircraft is further than 20 m from the Home Point when the RTH procedure begins, it ascends to the pre-set RTH altitude and then ies to the Home Point at a speed of 12 m/s. If the current altitude is higher than the RTH altitude, the aircraft ies to the Home Point at the current

altitude. Forward and Backward vision systems are enabled.

b. If the aircraft is between 5 m and 20 m from the Home Point when the RTH procedure begins:

i. If the RTH at Current Altitude option is enabled the aircraft ies to the Home Point at the current

altitude, unless the current altitude is less than 2 m, in which case the aircraft ascends to 2 m

and then ies to the Home Point at a speed of 3 m/s.

ii. If the RTH at Current Altitude option is disabled, the aircraft lands immediately.

c. If the aircraft is less than 5 m from the Home Point when the RTH procedure begins, it lands

immediately.

3. After reaching the Home Point, the aircraft lands and the motors stop.

1 Record Home Point 2 Conrming Home Point

4 Signal Lost for Extended Time

RTH (adjustable altitude)

Height over HP > Failsafe Altitude

Elevate to Failsafe Altitude

Failsafe Altitude

Height over HP ≤ Failsafe Altitude

3 Remote Controller Signal Lost

6 Landing

Obstacle Avoidance during RTH

Provided that lighting conditions are sucient for the Forward and Backward Vision Systems to operate,

the Mavic 2 Enterprise senses and actively attempts to avoid obstacles during RTH. The obstacle

avoidance procedure is as follows:

1. The aircraft decelerates when an obstacle is sensed.

2. The aircraft stops and hovers and then ascends until no obstacle is sensed.

3. The RTH procedure resumes. The aircraft ies to the Home Point at the new altitude.

Mavic 2 Enterprise User Manual

The aircraft cannot return to the Home Point if the GPS signal is weak or unavailable.

In Smart RTH and Low Battery RTH, the aircraft automatically ascends to an altitude of 65 ft

(20 m). Once the altitude is 65 ft (20 m) or higher, move the throttle stick and the aircraft stops

ascending and flies to the Home Point at its current altitude.

The aircraft cannot avoid obstacles during Failsafe RTH if the Forward and Backward Vision

Systems are unavailable. It is important to set a suitable RTH Altitude before each flight. Launch

DJI Pilot, tap and then set the RTH Altitude.

During RTH, the aircraft’s speed and altitude can be controlled using the remote controller or

DJI Pilot, but the flight controller controls its orientation and direction of flight.

During RTH, obstacles on either side of the aircraft cannot be detected or avoided.

Landing Protection

Landing Protection activates during Smart RTH and the aircraft performs as follows:

1. When Landing Protection determines that the ground is suitable for landing, the aircraft lands gently.

2. If Landing Protection determines that the ground is not suitable for landing, the aircraft hovers and

waits for the pilot to conrm it is suitable to land.

3. If Landing Protection is not operational, DJI Pilot displays a landing prompt when the aircraft

descends below 0.5 m. Pull down on the throttle for one second or use the auto landing slider in the

app to land.

Landing Protection activates during Low Battery RTH and Failsafe RTH. The aircraft performs as

follows:

During Low Battery RTH and Failsafe RTH, the aircraft hovers at 2 m above the ground and waits for

the pilot to conrm it is suitable to land. Pull down on the throttle for one second or use the auto landing slider in the app to land. Landing Protection activates and the aircraft performs the steps listed above.

Vision Systems are disabled during landing. Be sure to land the aircraft with caution.

Mavic 2 Enterprise User Manual

Vision Systems and Infrared Sensing Systems

The Mavic 2 Enterprise is equipped with Forward, Backward, Downward, and Lateral Vision Systems,

and Upward and Downward Infrared Sensing Systems, providing omnidirectional obstacle sensing (if

lighting conditions are adequate).

The main components of the Forward, Backward, and Downward Vision Systems are six cameras

located on the nose, rear side, and the underside of the aircraft. Lateral Vision Systems are two cameras

located on either side of the aircraft.

The main components of the Upward and Downward Infrared Sensing Systems are two 3D infrared

modules located on the upper and underside of the aircraft.

The Downward Vision System and Infrared Sensing System helps the aircraft maintain its current

position and hover in place more precisely and to y indoors or in other environments where a GPS

signal is unavailable. In addition, the Auxiliary Bottom Light located on the underside of the aircraft

improves visibility for the Downward Vision System in weak light conditions.

Forward Vision System

Downward Vision System

Lateral Vision System

Downward Vision System

Auxiliary Bottom Light

Downward Infrared Sensing System

Upward Infrared Sensing System

Lateral Vision System

Backward Vision System

Detection Range

The detection range of the Vision Systems is depicted as followed. Please note that the aircraft cannot

sense or avoid the obstacles that are not within detection range.

40°

40° 40°

3°

80°

77°

80°

60°

4°

3°

100°100°

70°

5°

65°

6°

83°

65°

6°

Mavic 2 Enterprise User Manual

Calibrating Vision System Cameras

The Vision System cameras installed on the aircraft are factory calibrated. If the aircraft experiences

a collision, however, it may require calibration via DJI Assistant 2 for Mavic or DJI Pil

The most accurate way to calibrate the Vision System cameras is by using DJI Assistant 2 for

Mavic. Follow the steps below to calibrate the Forward Vision System cameras, then repeat

the steps to calibrate other Vision System cameras.

ot.

Point the aircraft toward the screen

Align the boxes

Pan and tilt the aircraft

Using the Vision Systems

The Downward Vision System and Infrared Sensing System activate automatically when the aircraft

is turned on. No further action is required. When using the Downward Vision System, the aircraft can hover precisely even without GPS.

The Downward Vision System is typically used in indoor environments where GPS is unavailable. The Downward Vision System works best when the aircraft is at altitudes of 1.6 to 33 ft (0.5 to 11 m). Please note that the Vision Positioning function may be aected if the aircraft’s altitude is above 33ft (11 m).

Mavic 2 Enterprise User Manual

2m以上

Follow the steps below to use the Downward Vision System:

1. Ensure the aircraft is in P-mode and place the aircraft on a at surface. Please

T P

note that the Downward Vision System cannot work properly on surfaces

without clear pattern variations.

2. Turn on the aircraft. The aircraft hovers in place after takeo. The Aircraft Status Indicators ash green

twice, which indicates the Downward Vision System is working.

Using the Forward and Backward Vision Systems, the aircraft can actively brake when detecting

obstacles in front. The Forward and Backward Vision Systems work best with adequate lighting and

clearly marked or textured obstacles. To allow for sucient time to break, the aircraft should not y more than 31 mph (50 kph) when ying forward or more than 27 mph (42 kph) when ying backward.

The Lateral Vision Systems requires better lighting and more textured or clearly marked obstacles, and

cannot sense dynamic objects, such as moving people, vehicles, tree branches, or blinking lights. The

Lateral Vision Systems are only available in Tripod Mode. The angular speed is limited to 24° /s and the

lateral ight speed is limited to 18 mph (29 mph).

Lateral Vision Systems have limited ability to sense and avoid obstacles, and the performance

may be affected by the surrounding environment. Be sure to maintain line of sight with the

aircraft and pay attention to prompts in DJI Pilot. DJI takes no responsibility for any aircraft that

is damaged or lost while using Lateral Vision Systems.

The Vision System cannot work properly over surfaces that DO NOT have clear pattern

variations. The Vision System is only effective when the aircraft is at an altitude of 0.5 to 50

meters. Please note that the Vision Positioning function may be affected if the aircraft’s altitude

is above 33 ft (11 m).

The Auxiliary Bottom Light is automatically enabled when the environment light is too weak and

the flight altitude is lower than 5 m. Please note that the Vision System cameras performance may be affected when the auxiliary bottom light is enabled. Fly with caution if the GPS signal is

weak.

The Vision System may NOT function properly when the aircraft is flying over water or snow-

covered areas.

Note that the Vision System may NOT function properly when the aircraft is flying too fast. Fly with

caution when flying at over 10 m/s (32.8 ft/s) at 2 m (6.6 ft) or over 5 m/s (16.4 ft) at 1 m (3.3 ft).

Operate the aircraft cautiously when in any of the following situations:

a. Flying over monochrome surfaces (e.g., pure black, pure white, pure green).

b. Flying over highly reflective surfaces.

c. Flying over water or transparent surfaces.

d. Flying over moving surfaces or objects.

e. Flying in an area where the lighting changes frequently or drastically.

f. Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.

g. Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).

h. Flying over surfaces without clear patterns or texture.

i. Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the same design).

j. Flying over obstacles with small surface areas (e.g., tree branches).

Mavic 2 Enterprise User Manual

Keep the sensors clean at all times. DO NOT tamper with the sensors. Do not obstruct the Infrared

Sensing System.

The Vision System may not be able to recognize patterns on the ground in low light conditions

(less than 100 lux).

If the aircraft speed exceeds 31 mph (50 kph), the Vision System does not have enough time to

brake and stop the aircraft at a safe distance from an obstacle.

If the aircraft experiences a collision, camera calibration is required. Calibrate the front cameras

if DJI Pilot prompts you to do so.

Do not fly on days that are rainy, smoggy, or if there is no clear sight.

Check the following every time before takeoff:

a. Ensure there are no stickers or any other obstructions over the glass of the Infrared Sensing

and Vision System.

b. If there is any dirt, dust, or water on the glass of the Infrared Sensing and Vision System,

clean it with a soft cloth. Do not use any cleanser that contains alcohol.

c. Contact DJI Support if there is any damage to the glass of the Infrared Sensing and Vision

System.

The Upward Infrared Sensing System only detects straight line distances directly above the

sensor and not the entire aircraft. Additionally, large obstacles such as roofs can be detected, but tiny obstacles such as leaves or electrical wires cannot. Fly with caution and do not rely solely on the Upward Infrared Sensing System to detect obstacles above the aircraft.

Do not obstruct the Downward Vision System and Downward Infrared Sensing System before

takeoff. Otherwise, the aircraft cannot take off again after landing and will have to be restarted.

Advanced Pilot Assistance Systems

The Advanced Pilot Assistance Systems (APAS) feature is available in P-mode. When APAS is enabled,

the aircraft continues to respond to user commands and plans its path according to both control stick

inputs and the ight environment. APAS makes it easier to avoid obstacles, obtain smoother footage, and gives a better ying experience.

When APAS is enabled, pressing the Flight Pause button on the remote controller brings the aircraft to a

stop. The aircraft hovers for three seconds and awaits pilot commands.

To enable APAS, tap

in DJI Pilot.

APAS

The APAS feature is only available when flying forward and backward. If the aircraft flies left or

right, APAS is disabled.

The aircraft hovers in place once there is an obstacle that cannot be avoided. The aircraft cannot

detect and avoid obstacles that are beneath it.

Make sure you use the Advanced Pilot Assistance System (APAS) when the Vision Systems

are available. Be sure there are no people, animals, objects with small surface areas (e.g., tree branches), or transparent objects (e.g., glass or water) along the desired flight path.

APAS may not function properly when the aircraft is flying over water or snow-covered area.

Be extra cautious when flying in extremely dark (< 300 lux) or bright (> 10,000 lux) environments.

APAS may not function properly when the aircraft is flying near its Flight Limits or in GEO Zones.

Pay attention to the Aircraft Status Bar in DJI Pilot and ensure the aircraft is working in APAS

mode normally.

Mavic 2 Enterprise User Manual

Flight Recorder

Flight data including ight telemetry, aircraft status information, and other parameters are automatically saved to the aircraft’s internal data recorder. The data can be accessed using DJI Assistant 2 for Mavic.

Password Protection

The Mavic 2 Enterprise supports password protection. This feature helps ensure secure access to your

aircraft and its onboard data storage, thus preventing leakage of sensitive information.

To set, change or delete the password, launch the DJI Pilot app, select Settings > Security Password.

The password is stored in the aircraft only and will not be uploaded to the DJI server. Therefore,

you need to format the aircraft to delete the security password if you forget it. The data stored in the aircraft will be delated once the aircraft is formatted.

To guarantee the maintenance, DJI will format the aircraft’s onboard data. Please remove

your security password and back up your data before sending your aircraft back for repair. DJI takes no responsibility for the data loss.

Attaching and Detaching the Propellers

The Mavic 2 Enterprise use low-noise propellers. There are two varieties of the propellers, which are

designed to spin in dierent directions. White marks are used to indicate which propellers should be

attached to which motors.

Marked Unmarked

Attach on motors with white marks Attach on motors without white marks

Turn the propellers in the indicated direction to mount and tighten.

Attaching the Propellers

Attach the propellers with the white marks to the motors with white marks and the unmarked propellers

to the motors without marks. Press each propeller down onto the motor and turn until it is secure.

Marked Unmarked

Mavic 2 Enterprise User Manual

Detaching the Propellers

Press the propellers down onto the motors and rotate them in the unlock direction.

Propeller blades are sharp. Handle with care.

Only use original DJI propellers. Do not mix propeller types.

Ensure that all propellers are in good condition before each flight. Do not use aged, chipped, or

broken propellers.

Ensure that the propellers and motors are installed securely before each flight.

To avoid injury, stand clear of and do not touch propellers or motors when they are spinning.

To avoid damaging the propellers, place the aircraft in the direction shown in the carrying

case during transportation or storage. Do not squeeze or bend the propellers. If propellers are damaged, the flight performance is affected.

Ensure the motors are mounted securely and rotating smoothly. Land the aircraft immediately if

a motor is stuck and unable to rotate freely.

Keep the motors free of dust.

DO NOT attempt to modify the structure of the motors.

DO NOT touch or let your hands or body come in contact with the motors after flight as they

may be hot.

DO NOT block any of the ventilation holes on the motors or the body of the aircraft.

Ensure the ESCs sound normal when powered on.

Intelligent Flight Battery

The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging/discharging

functionality. Only use a DJI approved AC power adapter to charge the battery.

Intelligent Flight Battery AC Power Adapter

Battery Features

1. Battery Level Display: The LED indicators display the current battery level.

2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to less than

60% of the maximum battery level when it is idle for more than 10 days. It takes approximately three

to four days to discharge the battery to 65%. It is normal to feel moderate heat being emitted from

the battery during the discharging process.

3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.

4. Overcharge Protection: The battery stops charging automatically once fully charged.

5. Temperature Detection: The battery only charges when the temperature is between 41° and 104° F (5°

and 40° C).

Mavic 2 Enterprise User Manual

6. Overcurrent Protection: The battery stops charging if an excess current is detected.

7. Over-discharge Protection: Discharging stops automatically to prevent excess discharge.

8. Short Circuit Protection: The power supply is automatically cut if a short circuit is detected.

9. Battery Cell Damage Protection: DJI Pilot displays a warning message when a damaged battery cell

is detected.

10. Hibernation Mode: The battery switches o after 20 minutes of inactivity to save power. If the

battery level is less than 10%, the battery enters Hibernation mode to prevent over-discharge. In

Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from

hibernation.

11. Communication: Information about the battery's voltage, capacity, and current is transmitted to the

aircraft.

12. Heating: Batteries of the Mavic 2 Enterprise are self-heating, which makes them capable of working

under harsh and cold weather conditions for as low 14° F (-10° C).

Refer to the Mavic 2 Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility for all operations and usage.

Using the Battery

Battery Level LEDs

Power Button

Low

High

Checking Battery Level

The battery level LEDs display how much charge remains. If the battery is turned o, press the Power

button, and the battery level LEDs light up to display the current battery level

Powering On/O

Press the Power button once, then press again, and hold for two seconds to turn the battery on or o.

Heating the Battery

Manual Heating: Make sure the battery is powered off. Press and hold the Power Button for five

seconds to initiate battery warm up manually.

The battery will warm up if the temperature is below 43 ℉ (6 ℃) and the battery level is above 45%. As it warms up, the brightness of the LED indicators will change accordingly, signaling ‘no LED light’, low,

medium, or high.

The battery will stop warming when it reaches 46 ℉ (8 ℃), and the LED indicators will blink clockwise, indicating that the battery temperature is between 46 to 50 ℉(8 to 10℃). This will last for approximately 20 minutes and then the battery will power o automatically.

Mavic 2 Enterprise User Manual

Auto Heating: Insert the battery into the aircraft and power it on. When the temperature of the battery is

below 43℉ (6℃) and the battery level is above 45%, it will warm up automatically and the temperature will remain between 46 to 50 ℉(8 to 10 ℃).

Low Temperature Notice

1. Battery capacity is signicantly reduced when ying in low-temperature environments of 14° to 41° F (-10°

to 5° C). It is recommended to heat the battery before use, and ensure to fully charge the battery

before takeo.

2. Batteries cannot be used in extremely low-temperature environments of < 14° F (-10° C).

3. To ensure optimal performance of the battery, warm up the battery so the temperature is above 46 °

F (8° C) before use.

4. The reduced battery capacity in low-temperature environments reduces the aircraft's wind speed

resistance. Please y with caution.

5. Fly with extra caution at a high sea level.

6. The heating function cannot be initiated when the battery temperature is higher than 43 ℉ (6 ℃) or

the battery level is lower than 45%.

7. When the temperature is below -4℉(-20℃), the battery will trigger low temperature protection and will not power on. When the battery temperature reaches 5℉(-15℃) or above, the low temperature

protection is automatically released.

Charging the Battery

Fully charge the Intelligent Flight Battery before using for the rst time:

1. Connect the AC power adapter to a power source (100-240 V, 50/60 Hz).

2. Attach the Intelligent Flight Battery to the AC power adapter using the battery charging cable with

the battery powered o.

3. The battery level LEDs display the current battery level during charging.

4. The Intelligent Flight Battery is fully charged when the battery level LEDs are all turned o. Detach the

AC power adapter when the battery is fully charged.

Charging Time: 1 hour and 30 minutes.

DO NOT charge an Intelligent Flight Battery immediately after flight as the temperature may be too

high. Wait until it cools down to room temperature before charging again.

The AC power adapter stops charging the battery if the battery cell temperature is not within the

operating range of 41° to 104° F (5° to 40° C). The ideal charging temperature is 71.6° to 82.4° F

(22° to 28° C).

The Battery Charging Hub (not included) can charge up to four batteries. Please visit the official

DJI Online Store to learn more.

Mavic 2 Enterprise User Manual

Power Outlet

AC Power Adapter

Intelligent Flight Battery

Battery Level LEDs During Charging

LED 1 LED 2 LED 3 LED 4

Battery Level LEDs During Charging

Battery Level

0%~25% 25%~50% 50%~75% Fully Charged

Battery Protection

Battery Protection Mechanisms

LED 1 LED 2 LED 3 LED 4 Blinking Pattern Battery Protection Item

LED 2 blinks twice per second Overcurrent detected

LED 2 blinks three times per

second

Short circuit detected

LED 3 blinks twice per second Overcharge detected

LED 3 blinks three times per

second

Over-voltage charger detected

LED 4 blinks twice per second Charging temperature is too low

LED 4 blinks three times per

second

Charging temperature is too high

Inserting the Intelligent Flight Battery

Insert the Intelligent Flight Battery into the aircraft’s battery compartment. Make sure it is mounted

securely and that the battery latches have clicked into place.

Click

Mavic 2 Enterprise User Manual

Removing the Intelligent Flight Battery

Slide the battery latches on the sides of the Intelligent Flight Battery to open the battery compartment.

Never insert or remove the battery while it is turned on.

Ensure the battery is mounted securely.

Gimbal and Camera

Gimbal

The Mavic 2 Enterprise 3-axis gimbal provides stabilization for the camera, allowing you to capture clear

and stable images and video. The gimbal has a tilt range of -90˚ to +30˚. Gimbal settings such as Gimbal

Mode and Gimbal Auto Calibration can be selected by tapping .

Use the gimbal dial on the remote controller to control the camera’s tilt. Alternatively, enter Camera View in DJI Pilot. Press the screen until a blue circle appears and drag the circle up and down to control camera tilt. Dragging the circle left and right controls the aircraft’s orientation.

Gimbal Operation Modes

Two gimbal operation modes are available. Switch between the different operation modes on the

camera settings page of DJI Pilot.

Follow Mode: The angle between the gimbal’s orientation and aircraft’s nose remains constant at all

times.

FPV Mode: The gimbal synchronizes with the movement of the aircraft to provide a first-person

perspective ying experience.

When the aircraft is powered on, do not tap or knock the gimbal. To protect the gimbal during

takeoff, always take off from open and flat ground.

Precision elements in the gimbal may be damaged in a collision or impact, which may cause the

gimbal to function abnormally.

Avoid getting dust or sand on the gimbal, especially in the gimbal motors.

A gimbal motor error may occur in the following situations:

a. The aircraft is on uneven ground or the gimbal’s motion is obstructed.

b. The gimbal experiences excessive external force, such as during a collision.

DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any

extra payload to the gimbal as this may cause the gimbal to function abnormally or even lead to permanent motor damage.

Make sure to remove the gimbal cover before powering on the aircraft. Also, make sure to mount

the gimbal cover when the aircraft is not in use.

Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal

recovers full functionality once it dries.

Camera

The Mavic 2 Enterprise uses a 1/2.3" CMOS sensor camera, supports 2x optical zoom, and the lens is

24-48 mm (35 mm format equivalent). The camera supports auto focus, which can focus at 0.5 m to

innity. The camera also supports replacing lters. The Mavic 2 Enterprise camera shoots up to 4K30fps

video and 12-megapixel photos, supports shooting modes such as Single shot, Burst shooting, Interval,

and Enhanced HDR. Mavic 2 Enterprise supports 2x optical zoom and 3x digital zoom when recording

video in 1080p24/25/30.

Mavic 2 Enterprise User Manual

Ensure the temperature and humidity is suitable for the camera during usage and storage.

Use a lens cleanser to clean the lens to avoid damage.

DO NOT block any ventilation holes on the camera as the heat generated may damage the device

and hurt the user.

Storing the Photos and Videos

The Mavic 2 Enterprise comes with 24 GB of internal storage to store photos and videos. To protect

your data and ensure secure access to your device, you can enable password protection.

A microSD card is also supported to store your photos and videos. A UHS-I Speed Grade 3 rating

microSD card is required due to the fast read and write speeds necessary for high-resolution video

data.

After enabling Add Timestamp and GPS Info in the camera settings on the DJI Pilot app, you will be

able to view the time and date that images or videos are taken.

Do not remove the microSD card from the aircraft while it is turned on. Otherwise, the microSD

card may be damaged.

To ensure the stability of the camera system, single video recordings are limited to 30 minutes.

Check camera settings before use to ensure they are configured as desired.

Before shooting important pictures or videos, shoot a few images to test the camera is operating

correctly.

Photos or videos cannot be transmitted or copied from the camera if the Intelligent Flight Battery

is powered off.

Be sure to power off the Intelligent Flight Battery correctly. Otherwise, your camera parameters

will NOT be saved and any recorded videos may be damaged. Note: Regardless of the reason, DJI is not responsible for any failure of an image or video to be recorded or having been recorded

in a way that is not machine-readable.

Video Edit

Mavic 2 Enterprise supports MP4 video formats, providing H.264 code formats.

The software below has been tested by DJI and is recommended for playing or editing videos.

Software Mac Version Win Version Adobe Premier Pro CC 2018 v12.1.1 (10) v12.1.1 (10) Davinci Resolve v15.0 free v14.3 Studio Apple Final Cut Pro X v10.4.3 N/A Apple QuickTime v10.4 (928.5.1) N/A Apple iMovie v10.4.2 N/A VLC Player v3.0.2 v3.0.2

Mavic 2 Enterprise User Manual

DJI AirSense

Manned aircraft with an ADS-B transceiver will actively broadcast ight information including location, flight path, speed, and altitude. DJI AirSense receives this by ADS-B transceivers via an on-board receiver or internet connection. UAVs installed DJI AirSense can obtain the position, orientation and

velocity information from the manned airplane built-in ADS-B transmitter (1090 ES and UAT standard

supported), calculate the collision risk level real time and send the warning to user. The system will

analyze the potential risk of collision by comparing the location of a manned aircraft, sending timely

warnings to pilots via the DJI Pilot app.

DJI AirSense provides users with information about nearby manned aircraft to ensure ight safety. The system doesn’t actively control the drone to avoid incoming aircraft. Always y your aircraft within a visual line of sight and be cautious at all times. Lower your altitude when you receive warnings. Please be aware that DJI AirSense has the following limitations:

1. It can only receive messages sent by manned aircraft installed with an ADS-B out device and in

accordance with 1090ES (RTCA DO-260) or UAT (RTCA Do-282) standards. DJI devices will not

receive related broadcast messages or send out warnings for manned aircraft without ADS-B outs

or with malfunctioning ADS-B outs.

2. If there is an obstacle or steel structure between civil and DJI aircraft, the system won’t be able

to receive ADS-B messages sent by manned aircraft or send out warnings. Keenly observe your

surroundings and y with caution.

3. Warnings may be sent with delay when the DJI AirSense is interfered by the surrounding. Keenly observe your surroundings and y with caution.

4. Warnings are not sent when a DJI aircraft is unable to determine its location.

5. It cannot receive ADS-B messages sent by manned aircraft or send out warnings when disabled or

miscongured.

On the precondition that connection between a DJI aircraft and the pilot remote controller is stable, when the system conrms the possibility of a collision, it will send a series of warnings based on the

distance between drone and manned aircraft. We recommended that the operator descend altitude

immediately after the rst warning to avoid a collision, choosing another ight path where necessary.

Warning Escalation:

The first (or "lowest") level warning occurs when the manned aircraft is detected. All detected

aircraft will be displayed in the app (up to 10 aircraft at a time). Please pay attention to ensure

flight safety.

The second (or “middle”) level warning occurs two kilometers away from the manned aircraft.

Please pay attention to avoid any hazards. The third (or “highest”) level warning occurs one kilometer away from the manned aircraft. Please

avoid the manned aircraft immediately.

Blue: The rst level warning Yellow: The second level warning

Red: The third level warning

Mavic 2 Enterprise User Manual

Modular Accessories

Mavic 2 Enterprise features an extended port, which allows users to mount additional DJI modular accessories onto the aircraft. Compatible DJI accessories consist of the following: M2E Beacon: Enables aircraft identication during ight at night or in low light areas.

M2E Spotlight: Used for long-range illumination and searches in low light conditions, assisting the

camera to shoot at night.

M2E Speaker: Used for long-range, real-time broadcasting or audio playback.

M2E Beacon M2E Spotlight M2E Speaker

Usage

The following example illustrates how to install and use the modular accessories. Please note, for the

purpose of this illustration we will use the M2E Beacon.

1. Remove the extended port cover on top of the aircraft. Make sure it is stored in a safe place for future

use.

2. Mount the Beacon onto the extended slot of the aircraft.

3. Tighten the knobs on both sides to ensure that the Beacon is rmly mounted onto the aircraft.

4. Power on the aircraft, and then launch the DJI Pilot app to use the Beacon.

The Auxiliary Bottom Light can be used as a beacon. You can simply enter Visual Navigation

Settings and select Bottom Auxiliary Light as Night Light in DJI Pilot.

Make sure that the accessories are correctly and securely mounted on the aircraft before using

the accessories. This is to prevent the accessory from falling off during flight.

DO NOT point the Spotlight or the Beacon directly at the human eye.

DO NOT use the Speaker near people or in an urban area where noise-sensitive structures are

concentrated as the loudness could cause injuries or danger.

Remote Controller

This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera.

Remote Controller

Built into the remote controller is DJI’s long-range transmission technology OcuSync 2.0, offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to DJI Pilot on your

mobile device at up to 1080p. Easily control the aircraft and camera using the onboard buttons. An

onboard LCD screen gives real-time aircraft data information and the detachable control sticks make

the remote controller easier to store.

In a wide-open area with no electromagnetic interference, OcuSync 2.0 smoothly transmits video links

at up to 1080p, no matter how the ight attitude is changed. The remote controller works at both 2.4

GHz and 5.8 GHz, automatically selecting the best transmission channel. OcuSync 2.0 reduces the

latency to 120-130 ms by improving the camera performance through the video decoding algorithm and

the wireless link.

Auto Focus is supported during shooting even in low light conditions.

The built-in battery has a capacity of 3950 mAh and a maximum run time of 2 hours and 15 minutes.

The remote controller charges the mobile device with a charging ability of 500 mA@5V. The remote

controller automatically charges Android devices. For iOS devices, rst be sure that charging is enabled in DJI Pilot. Charging for iOS devices is disabled by default and needs to be enabled each time the

remote controller is powered on.

Using the Remote Controller

Press the Power button to display the current battery level on the LCD screen. Press once, then again, and hold to turn the remote controller on or o.

Mavic 2 Enterprise User Manual

Charging the Battery

Connect the provided AC power adapter to the power port on the remote controller. It takes

approximately 2 hours and 15 minutes to charge the remote controller battery fully. Remove the RC

cable from the remote controller before charging.

Power Outlet

AC Power Adapter

USB Adapter

Controlling the Camera

Use the Aperture/Shutter Adjustment Dial to adjust the aperture and shutter parameters.

Use the Record button to start/stop recording.

Use the Zoom Adjustment Dial to zoom in/out.

Zoom Adjustment Dial

Record button

Focus/Shutter button

Mavic 2 Enterprise User Manual

Controlling the Aircraft

The control sticks control the aircraft’s orientation (yaw), forward/ backward movement (pitch), altitude

(throttle), and left/right movement (roll). The control stick mode determines the function of each control

stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and

custom modes can be congured in DJI Pilot. The default mode is Mode 2.

In each of the three pre-programmed modes, the Mavic 2 hovers in place at a constant orientation when

both sticks are centered. Pushing a control stick away from the center position performs the functions shown in the gure below.

Mode 1

Mode 2

Mode 3

Left Stick

Left Stick Right Stick

Forward

Backward

Turn RightTurn Left

Down

Turn RightTurn Left

Forward

Right Stick

Right StickLeft Stick

Down

RightLeft

Forward

Backward

RightLeft

Backward

Down

RightLeft

Turn RightTurn Left

Mavic 2 Enterprise User Manual

Remote

Controller

(Mode 2)

( Indicates Nose Direction)

Aircraft

Remarks

Moving the left stick up or down changes the

aircraft’s altitude. Push the stick up to ascend

and down to descend. The more the stick is

pushed away from the center position, the faster

the aircraft will change altitude. Always push the

stick gently to prevent sudden and unexpected

changes in altitude.

Moving the left stick to the left or right controls

the orientation of the aircraft. Push the stick left to

rotate the aircraft counter-clockwise and right to

rotate the aircraft clockwise. The more the stick is

pushed away from the center position, the faster

the aircraft will rotate.

Moving the right stick up and down changes the

aircraft’s pitch. Push the stick up to fly forward and down to y backward. The more the stick is

pushed away from the center position, the faster

the aircraft will move.

Moving the right stick to the left or right changes

the aircraft’s roll. Push the stick left to y left and

right to fly right. The more the stick is pushed

away from the center position, the faster the

aircraft will move.

It is recommended to remove the control sticks and store in the storage slots on the remote controller during storage or transportation to avoid damage.

Mavic 2 Enterprise User Manual

Flight Mode Switch

Toggle the switch to select the desired ight mode.

Position Flight Mode

S S-mode

T P

P P-mode

T T-mode

Regardless of which position the switch is in on the remote controller, the Mavic 2 Enterprise begins in

P-mode by default. To switch ight modes, rst go to Camera View in DJI Pilot, tap and enable “Multiple Flight Modes”. After enabling multiple ight modes, toggle the switch to P and then to S or T to switch ight modes.

RTH Button

Press and hold the RTH button to start the Return to Home (RTH) procedure where the aircraft returns to the last recorded Home Point. Press this button again to cancel RTH and regain control of the

aircraft. Refer to the Return to Home section for more information about RTH.

C1 and C2 Button

The functions of the C1 and C2 buttons are set in DJI Pilot. The default conguration for the C1 button is Center Focus and the default conguration for the C2 button is Playback.

Remote Controller Alert

The remote controller sounds an alert during RTH or when the battery level is low (6% to 15%). The RTH

and low battery alert level can be cancelled by pressing the power button. The critical battery level alert

(less than 6%), however, can not be cancelled.

Optimal Transmission Zone

The signal between the aircraft and the remote controller is most reliable when the antennas are

positioned in relation to the aircraft as depicted below.

Mavic 2 Enterprise User Manual

strong

weak

Ensure that the aircraft is ying within the optimal transmission zone. To maintain optimal transmission performance, adjust the remote controller and antennas according to the gure above.

LCD Screen

The LCD Screen displays various system statuses including real-time ight telemetry and battery levels. Refer to the gure below for the meaning of each icon on the LCD Screen.

GPS signal strength

System status prompt

Flight speed

RC battery level

Distance to the ground

Flight mode



Vision System

Aircraft battery level

RC signal strength

Flight distance

Exposure compensation

Ascend/Descend

Flight altitude

Camera status

Motor rotation speed

microSD card

Sport mode

Mavic 2 Enterprise User Manual

Linking the Remote Controller

The remote controller is linked to your aircraft before delivery. Linking is only required when using a new

remote controller for the rst time. Follow these steps to link a new remote controller:

1. Power on the aircraft and the remote controller.

2. Launch DJI Pilot.

3. Enter “Camera” and tap on and then tap the button to conrm. The remote controller is ready to link.

4. Locate the link button on the side of the aircraft, as shown in the figure below. Press the link

button to start linking. The Linking Status Indicator displays solid green once the remote controller

successfully links to the aircraft, and the LCD screen on the remote controller displays the aircraft’s

information.

Linking Status Indicator

Ensure the remote controller is within 1.6 ft (0.5 m) of the aircraft during linking.

The remote controller will unlink itself from an aircraft if a new remote controller links to the same

aircraft.

Fully charge the remote controller before each flight.

If the remote controller is powered on and is NOT in use for five minutes, an alert will sound.

After 10 minutes, it will automatically power off. Move the sticks to cancel the alert.

Adjust the mobile device clamp to ensure the mobile device is secure.

Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to

achieve optimal transmission quality.

Repair or replace the remote controller if damaged. A damaged remote controller antenna

greatly decreases performance.

Fully charge the battery at least once every three months to maintain battery health.

Ensure the control sticks are mounted securely.

Link Button

DJI Pilot App

This section introduces the main functions of the DJI Pilot app.

DJI Pilot App

Bind Aircraft

Manual Flight

Mission Flight

1.5M

H.S 10.0 m/s

/MF

19:29

61%

1.0x

The DJI Pilot app is specifically developed for enterprise users. Manual flight integrates a variety of professional features that make ying simple and intuitive. Mission ight supports ight planning, and allows you to control the drone automatically, making your workow much simpler and more ecient.

ENTERPRISE

M2E SPEAKERZOOM

Manual Flight

26 25

1. System Status Bar

Inight(GPS)

2. Obstacle Detection Status

when obstacles are within the detection range.

In Flight（GPS）

2018-10-19 16:27:34

113.95, 22.54

H 10 m

D 30 m

113.95, 22.54

This icon indicates aircraft ight status and displays various warning messages.

：

: Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed

V.S 2.0 m/s

2223

GPS

10：05 12：45

FlightHub Data Sync

1011 12 13 14

8 97654321

2.4G

1.0x

16 17

Mavic 2 Enterprise User Manual

3. Battery Level Indicator Bar

: The battery level indicator provides a dynamic display of the battery level. The colored zones on

the battery level indicator represent the power levels needed to carry out dierent functions.

4. Flight Mode

: The text next to this icon indicates the current ight mode.

Tap to congure the Flight Controller settings. These settings allow you to modify ight limits and set gain

values.

5. AirSense Status

: The AirSense Status displays information about nearby manned aircraft to ensure flight safety,

including the distance between DJI aircraft and manned aircraft. AirSense will instruct users to land if

nearby aircraft are detected.

6. GPS Signal Strength

: Shows the current GPS signal strength. White bars indicate adequate GPS strength.

7. Vision Systems Status

: Tap this button to enable or disable features provided by the Vision Systems, and it displays the status for all vision systems. The green icon indicates the corresponding vision system is available. The red icon

indicates the corresponding vision system is unavailable.

8. Remote Controller Signal

: This icon shows the strength of the remote controller signal. The icon will blink when an interference

is recognized during ight. When there are no additional warnings in DJI Pilot, it means that the interference will not aect operation and overall ight experience.

9. Focus/Metering Button

/ : Tap to switch between focus and metering mode. Tap to select object for focusing or metering.

Auto Focus-Continuous will be triggered automatically according to the status of the aircraft and camera

after enabling Auto Focus.

10. HD Video Link Signal Strength

: This icon shows the strength of the HD video downlink connection between the aircraft and the

remote controller. The icon will blink when an interference is recognized during ight. When there are no additional warnings in DJI Pilot, it means that the interference will not aect operation and overall ight

experience.

11. Zoom Value

1.0x

: Displays the zoom value. Tap to set the value.

Mavic 2 Enterprise User Manual

12. Battery Settings

61%

: Shows the current battery level. Tap to view the battery information menu, set the various battery

warning thresholds, and view the battery warning history.

13. AF(CF)/MF

: Tap to switch the focus mode.

14. General Settings

: Tap to enter the General Settings menu to set units of measurement, enable/disable livestream and

more.

15. Auto Exposure Lock

: Tap to lock the exposure value.

16. Photo/Video Toggle

: Tap to switch between photo and video recording modes.

17. Gimbal Slider

: Displays the gimbal tilt angle.

18. Shoot/Record Button

: Tap to start shooting photos or recording video.

19. Manual Focus

Only eective in MF mode.

20. Camera Settings

: Tap to enter the Camera Settings menu.

Tap to set the camera’s ISO, shutter, and auto exposure settings. Tap to select photo shooting modes. The Mavic 2 supports Single Shot, Burst Shot and Interval Shot.

Tap to enter the General Camera Settings menu.

21. Playback

: Tap to enter Playback and preview photos and videos as soon as they are captured.

22. Flight Telemetry

D 30 m

: Distance between the aircraft and the Home Point.

H 10.0 m HS 10.0 m/s VS 2.0 m/s

: Height from the Home Point.

: Aircraft horizontal speed.

: Aircraft vertical speed.

113.95, 22.54

: The longitude and latitude of the aircraft.

: Shows the remaining capacity or recording duration of the internal storage.

: Shows the remaining capacity or recording duration of the microSD card.

23. Map

Tap to view the map.

Mavic 2 Enterprise User Manual

24. Time and GPS Information

Shows the current date, time and the longitude and latitude of the aircraft.

25. Accessory

Shows the connecting accessory such as the beacon , spotlight or speaker . Tap on the screen to set the accessory.

26. Advanced Pilot Assistance System

: Tap to enable/disable the APAS feature. The APAS feature is disabled if the Forward and Backward

APAS

Vision Systems are disabled or unavailable.

27. Back

: Tap to return to the main menu.

Mission Flight (Coming soon)

Set a waypoint ight path, dene waypoint actions then start ying with a tap.

Album

View your masterpieces all in one place. You can save the photos or videos to your mobile device.

DJI FlightHub

DJI FLIGHTHUBTM is a web-based drone management platform that provides users with real-time monitoring, ight logs and data, team management and more. For more information, please visit www.dji.com/ighthub

Be sure to fully charge your mobile device before launching DJI Pilot.

Mobile cellular data is required when using DJI Pilot. Please contact your wireless carrier for data

charges.

If you are using a phone as your mobile display device, DO NOT accept phone calls or use the

texting features during flight.

Read all safety tips, warning messages, and disclaimers carefully. Be familiar with the related

regulations in your area. You are solely responsible for being aware of all relevant regulations and

flying in a way that is compliant.

a. Read and understand the warning messages before using the Auto-take off and Auto-landing

features.

b. Read and understand the warning messages and disclaimer before setting the altitude beyond

the default limit.

c. Read and understand the warning messages and disclaimer before switching between flight

modes.

d. Read and understand the warning messages and disclaimer prompts near or in no-fly zones.

Land your aircraft immediately at a safe location if an alert shows on the app.

Review all warning messages on the checklist displayed in the app before each flight.

Cache the map data of the area where you intend to fly the aircraft by connecting to the internet

before each flight.

The app is designed to assist your operation. Please use your sound discretion and DO NOT rely

on the app to control your aircraft. Your use of the app is subject to DJI Pilot Terms of Use and DJI Privacy Policy. Please read them carefully in the app.

Flight

This section describes safe ight practices and ight restrictions.

Flight

Once pre-ight preparation is complete, it is recommended to use the ight simulator in DJI Pilot to hone your ight skills and practice ying safely. Ensure that all ights are carried out in an open area. Refer to the Remote Controller and DJI Pilot sections for information about using the remote controller and the

app to control the aircraft.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 10 m/s, snow,

rain, and fog.

2. Fly in open areas. Tall structures and large metal structures may aect the accuracy of the onboard compass and GPS system.

3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.

4. Minimize interference by avoiding areas with high levels of electromagnetism such as locations near

power lines, base stations, electrical substations, and broadcasting towers.

5. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when ying 19685 ft (6000 m) or more above sea level, since battery

and aircraft performance may be reduced.

6. The Mavic 2 cannot use GPS within the polar regions. Use the Downward Vision System when ying

in such locations.

Flight Limits and GEO Zones

Abide by all laws and regulations when ying your Mavic 2 Enterprise. Flight limitations are applied by

default to help users operate this product safely and legally. Flight limitations include altitude limits,

distance limits, and GEO Zones. Altitude limits, distance limits, and GEO Zones function concurrently to manage flight safety when operating in P-mode.

Flight Altitude and Distance Limits

The ight altitude and distance limits may be changed in DJI Pilot. The maximum ight altitude setting cannot exceed 1640 ft (500 m). Based on these settings, the aircraft will y in a restricted cylinder, as

shown below:

Max Radius

Home Point

Max Flight Altitude

Height of aircraft

when turned on

Mavic 2 Enterprise User Manual

GPS Signal Strong Blinking Green

Flight Limits DJI Pilot App Aircraft Status Indicator

Max Altitude

Max Distance

GPS Signal Weak Blinking Yellow

Max Altitude

Max Distance No limit

If the aircraft reaches one of the limits, you can still control the aircraft, but you cannot y it any farther. If the aircraft ies out of the max radius, it will y back within range automatically when the

GPS signal is strong.

For safety reasons, please do not y close to airports, highways, railway stations, railway lines,

city centers, or other sensitive areas. Fly the aircraft only within your line of sight.

Aircraft's altitude cannot

exceed the specied value.

Flight distance must be within

the max radius.

Flight Limits DJI Pilot App Aircraft Status Indicator

Height is restricted to 16 ft (5 m) when

the GPS signal is weak and Downward

Vision System is activated. Height is

restricted to 98 ft (30 m) when the GPS

signal is weak and Downward Vision

System is inactivate.

Warning: Height

limit reached.

Warning: Distance

limit reached.

Warning:

Height limit

reached.

N/A

GEO Zones

All GEO Zones are listed on the DJI official website at http://www.dji.com/flysafe. GEO Zones are

divided into different categories and include locations such as airports, flying fields where manned

aircraft operate at low altitudes, borders between countries, and sensitive locations such as power

plants.

Pre-Flight Checklist

1. Ensure the remote control device, mobile device, and Intelligent Flight Battery are fully charged.

2. Ensure the Intelligent Flight Battery and the propellers are mounted securely.

3. Ensure the aircraft arms and propellers are unfolded.

4. Ensure the gimbal and camera are functioning normally.

5. Ensure that there is nothing obstructing the motors and that they are functioning normally.

6. Ensure that DJI Pilot is successfully connected to the aircraft.

7. Ensure that the camera lens and Vision System sensors are clean.

Mavic 2 Enterprise User Manual

8. Make sure that the accessories are correctly and securely mounted on the aircraft before using it.

9. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI certied manufacturers may cause system malfunctions and compromise safety.

Starting/Stopping the Motors

Starting the Motors

A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the inner or

outer bottom corners to start the motors. Once the motors have started spinning, release both sticks

simultaneously.

Stopping the Motors

There are two methods to stop the motors:

Method 1: When the aircraft has landed, push and hold the left stick down. The motors stop after three

seconds.

Method 2: When the aircraft has landed, conduct the same CSC that was used to start the motors, as

described above. The motors stop immediately. Release both sticks once the motors have

stopped.

Method 1 Method 2

Stopping Motors Mid-Flight

Stopping the motors mid-ight will cause the aircraft to crash. The motors should only be stopped midight in an emergency situation such as if there is a collision, a motor has stalled, the aircraft is rolling in

the air, or the aircraft is out of control and is ascending/descending very quickly. To stop the motors mid-

ight, use the same CSC that was used to start the motors.

Mavic 2 Enterprise User Manual

Test Flight

Takeoff/Landing Procedures

1. Place the aircraft in an open, at area with the Aircraft Status Indicator facing towards you.

2. Turn on the aircraft and the remote controller.

3. Launch DJI Pilot and enter Camera View.

4. Wait until the Aircraft Status Indicator blinks green indicating that the Home Point has been recorded and it is now safe to y.

5. Gently push the throttle stick to take o or use auto-takeo.

6. Pull the throttle stick or use auto-landing to land the aircraft.

7. Turn o the aircraft and remote controller.

Video Suggestions and Tips

1. The pre-ight checklist is designed to help you y safely and to ensure that you can shoot video during ight. Go through the full pre-ight checklist before each ight.

2. Select the desired gimbal operation mode in DJI Pilot.

3. Only shoot video when ying in P-mode or T-mode.

4. DO NOT y in bad weather conditions such as when it is raining or windy.

5. Choose the camera settings that best suit your needs. Settings include photo format and exposure

compensation.

6. Perform ight tests to establish ight routes and to preview scenes.

7. Push the control sticks gently to keep the aircraft movement smooth and stable.

Appendix

Specifications

Aircraft

Takeo Weight 905 g

Dimensions Folded:

214×91×84 mm (length×width×height) Unfolded: 322×242×84 mm (length×width×height)

Diagonal Distance 354 mm

Max Ascent Speed 5 m/s (S-mode), 4 m/s (P-mode)

Max Descent Speed 3 m/s (S-mode), 3 m/s (P-mode)

Max Speed 72 km/h (S-mode) (near sea level, no wind)

Max Service Ceiling Above Sea Level

Max Flight Time 31 minutes (at a consistent 25 kph, no wind)

Max Hovering Time 29 min (no wind)

Overall Flight Time 25 minutes ( in normal ight, 15% remaining battery level )

Max Flight Distance 18 km (at a consistent 50 kph, no wind)

Max Wind Speed Resistance

Max Tilt Angle 35° (S-mode, with remote controller), 25° (P-mode)

Max Angular Velocity 200°/s

Operating Temperature Range

GNSS GPS+GLONASS

Hovering Accuracy Range Vertical:

Operating Frequency 2.400 - 2.4835 GHz;5.725 - 5.850 GHz

Transmission Power (EIRP) 2.4 GHz

Internal Storage 24 GB

Gimbal

Mechanical Range Tilt: -135 to 45°, Pan: -100 to 100°, Roll: -45 to 45°

Controllable Range Tilt: -90 to 30°, Pan: -75 to 75°

Stabilization 3-axis (tilt, roll, pan)

6000 m

27 min (with beacon turned on) 28 min (with beacon turned o) 22 min (with spotlight turned on) 26 min (with spotlight turned o) 25 min (with speaker turned on) 26 min (with speaker turned o)

29–38 kph

-10°C - 40°C

±0.1 m (when vision positioning is active)

±0.5 m (with GPS positioning)

Horizontal: ±0.3 m (when vision positioning is active)

±1.5 m (with GPS positioning)

FCC: ≤26 dBm; CE: ≤20 dBm; SRRC: ≤20 dBm; MIC: ≤20 dBm

5.8 GHz

FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm

Mavic 2 Enterprise User Manual

Max Control Speed (tilt) 120°/s

Angular Vibration Range ±0.005°

Sensing System

Sensing System Omnidirectional Obstacle Sensing

FOV Forward: Horizontal: 40°, Vertical: 70°

Backward:Horizontal: 60°, Vertical: 77°

Downward: Front and Back: 100°, Left and Right: 83° Lateral: Horizontal: 80°, Vertical: 65°

Obstacle Sensing Range Forward: Precision Measurement Range: 0.5 - 20 m

Operating Environment

Velocity Range ≤31mph (50 kph) at 6.6 ft (2 m) above ground

Altitude Range 0.1 - 11 m

Operating Range 0.3 - 50 m

Camera

Sensor 1/2.3" CMOS

Lens FOV: approx. 83° (24 mm) approx. 48° (48 mm)

ISO Range Video: 100-3200

Shutter Speed Electronic Shutter: 8–1/8000 s

Still Image Size 4000×3000

Still Photography Modes Single shot

Video Resolution 4K: 3840×2160 24/25/30p

Max Video Bitrate 100 Mbps

Supported File System FAT32: ≤ 32 GB

Detectable Range: 20 - 40 m

Eective Sensing Speed: ≤ 14 m/s

Backward: Precision Measurement Range: 0.5 - 16 m

Detectable Range: 16 - 32 m

Eective Sensing Speed: ≤ 12 m/s

Upward: Precision Measurement Range: 0.1 - 8 m

Downward: Precision Measurement Range: 0.5 - 11 m

Detectable Range: 11 - 22 m

Sides: Precision Measurement Range: 0.5 - 10 m Eective Sensing Speed: ≤ 8 m/s

Surface with clear pattern and adequate lighting (lux >15

Detects diuse reective surfaces (>20%) (walls, trees, people, etc.)

Eective Pixels: 12 million

35 mm Format Equivalent: 24-48 mm Aperture: f/2.8 (24 mm)–f/11 (48 mm)

Shooting Range: 0.5 m to ∞

Photo: 100-1600 (auto)

100-3200 (manual)

Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias Interval (JPEG: 2/3/5/7/10/15/20/30/60s RAW: 5/7/10/15/20/30/60s)

2.7K: 2688×1512 24/25/30/48/50/60p

FHD: 1920×1080 24/25/30/48/50/60/120p

exFAT: > 32 GB

)

Mavic 2 Enterprise User Manual

Photo Format JPEG / DNG (RAW)

Video Format MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265)

Supported SD Cards Micro SD

Operating Temperature

Range

HDR HDR, 13 EV

Hyperlight 8 dB SNR

Remote Controller

Operating Frequency 2.400 - 2.4835 GHz; 5.725 - 5.850 GHz

Max Transmission Distance FCC: 8000 m; CE: 5000 m; SRRC: 5000 m; MIC: 5000 m

Operating Temperature Range

Battery 3950 mAh

Transmission Power (EIRP) 2.400 - 2.4835 GHz

Operating Current/Voltage 1800 mA @ 3.83 V

Supported Mobile Device Size

Supported USB Port Types Lightning, Micro USB (Type-B), USB-C

Charger

Input 100-240 V, 50/60 Hz, 1.8 A

Output Main: 17.6 V 3.41 A or 17.0 V 3.53 A

Voltage 17.6±0.1 V or 17.0 V±0.1 V

Rated Power 60 W

Intelligent Flight Battery

Capacity 3850 mAh

Voltage 15.4 V

Max Charging Voltage 17.6 V

Battery Type LiPo 4S

Energy 59.29 Wh

Net Weight 297 g

Charging Temperature Range

Max Charging Power 80 W

Heating Temperature Rang 14° to 43° F (-10° to 6° C)

Heating Time 500 s (max)

Heating Power 55 W (max)

Supporting Micro SD with capacity up to 128 GB and R/W speed up to UHS-I Speed Grade 3

-10°C to 40°C

(unobstructed, free of interference)

0°C - 40°C

FCC:≤26 dBm; CE:≤20 dBm; SRRC:≤20 dBm; MIC: ≤20 dBm

5.725 - 5.850 GHz FCC: ≤26 dBm; CE: ≤14 dBm; SRRC:≤26 dBm

Max length: 160 mm; max thickness: 6.5 – 8.5 mm

USB: 5 V 2 A

5℃ - 40℃

Mavic 2 Enterprise User Manual

App

Video Transmission System OcuSync 2.0

Name DJI Pilot

Remote Controller: 720p@30fps / 1080p@30fps

Live View Quality

Latency (depending on environmental conditions and mobile device)

Required Operating System

M2E Beacon

Dimensions 68×40×27.8 mm

Interface Type USB Micro-B

Power Avg. 1.6 W

Luminous Intensity Min. Angle: 55 cd; light intensity: 157 cd

Max. Visible Distance 5000 m (with good air quality and high visibility)

M2E Spotlight

Dimensions 68×60×41 mm

Interface Type USB Micro-B

Power Max. 26 W

Illuminance FOV 17°, Max. 11 lux @ 30 m straight

Illumination area 30 m

M2E Speaker

Dimensions 68×55×65 mm

Interface Type USB Micro-B

Power Max. 10 W

Decibel 100 dB at 1 m-distance (International Standard)

Code Stream 16 kbps

DJI Goggles: 720p@30fps / 1080p@30fps DJI Goggles RE: 720p@30fps / 1080p@30fps

120 - 130 ms

iOS 10.0 or later Android 5.0 or later

Calibrating the Compass

It is recommended that the compass is calibrated in any of the following situations when ying outdoors:

1. Flying at a location farther than 31 miles (50 km) away from the location the drone was last own.

2. The aircraft has not been own for more than 30 days.

3. A compass interference warning appears in DJI Pilot and/or the Aircraft Status Indicators blink

alternating red and yellow.

DO NOT calibrate the compass in locations where magnetic interference may occur, such

as close to magnetite deposits or large metallic structures such as parking structures, steel reinforced basements, bridges, cars, or scaffolding.

DO NOT carry objects (such as cell phones) that contain ferromagnetic materials near the aircraft

during calibration.

It is not necessary to calibrate the compass when flying indoors.

Mavic 2 Enterprise User Manual

Calibration Procedure

Choose an open area to carry out the following procedure.

1. Tap the System Status Bar in DJI Pilot, select “Calibrate”, and follow the on-screen instructions.

2. Hold the aircraft horizontally and rotate it 360 degrees. The Aircraft Status Indicator will turn solid

green.

3. Hold the aircraft vertically, with its nose pointing downward, and rotate it 360 degrees around a

vertical axis.

4. If the Aircraft Status Indicator blinks red, the calibration has failed. Change your location and try the

calibration procedure again.

Horizontal Calibration

The aircraft can take off immediately once calibration is complete. If you wait more than three minutes to take off after calibration, you may need to calibrate again. It is possible that another compass interference warning will appear while the aircraft is on the ground. This indicates that the current location is not suitable for flying the aircraft, due to the level of magnetic interference.

Vertical Calibration

Firmware Updates

Use DJI Pilot or DJI Assistant 2 for Mavic to update the aircraft rmware.

Using DJI Pil

When you connect the aircraft or remote controller to DJI Pilot, you will be notied if a new rmware

update is available. To start updating, connect your mobile device to the internet and follow the on-

screen instructions. Note that you cannot update the rmware if the remote controller is not linked to the

aircraft.

Using DJI Assistant

The USB-C port is used when connecting the aircraft to a computer to update rmware. Follow the instructions below to update the rmware through DJI Assistant 2 for Mavic:

2 for Mavic

Mavic 2 Enterprise User Manual

1. With the aircraft powered o, connect the aircraft to a computer via the Micro USB port using a Micro

USB cable.

2. Power on the aircraft.

3. Launch DJI Assistant 2 for Mavic and log in with your DJI account.

4. Select “Mavic 2” and click on Firmware Updates on the left panel.

5. Select the rmware version that you wish to update to.

6. Wait for the rmware to download. The rmware update will start automatically.

7. Reboot the aircraft after the rmware update is complete.

Ensure the aircraft is connected to the computer before powering on.

The firmware update will take around 15 minutes. It is normal that the gimbal goes limp,

aircraft status indicators blink, and the aircraft reboots. Please wait patiently until the update is

complete.

Ensure the computer has access to the Internet.

Before performing an update ensure the Intelligent Flight Battery has at least 50% power and

the remote controller has at least 30% power.

Do not disconnect the aircraft from the computer during an update.

For safety, always update the firmware to the latest version when an update notification is shown

in DJI Pilot.

Firmware update notifications will prompt you to proceed with an update immediately or to

update the firmware within three days. If you choose to ignore the current firmware update, you

are required to accept the prompted disclaimer. You further understand and agree that the data

includes but is not limited to user selection records and may be uploaded to and maintained on

a DJI designated server.

The remote control device may become unlinked from the aircraft after updating. Re-link the

remote control device and aircraft.

Be sure to check all connections and remove the propellers from the motors before performing

the firmware update. DO NOT disconnect the aircraft or remote controller from the computer or

internet while updating the firmware.

Remote Controller LCD Screen Menu Information

Remote Controller Status

BAT xx PCT Remote controller battery level. SHUTDOWN_ Remote controller is powering o. CHARGING_ Remote controller is charging. USB PLUGGED Mavic 2 has been connected to a computer.

FC U-DISK Flight Controller is reading data.

UPGRADING Upgrading. BINDING Aircraft is binding with the remote controller.

Before Flight

CONNECTING_ The remote controller is connecting to the aircraft. SYS INITING System is initiating. READY TO GO Ready to take o.

Flight Mode

BEGINNER In Beginner Mode. GPS MODE In P-GPS Mode.

Mavic 2 Enterprise User Manual

OPTI MODE In P-OPTI Mode. ATTI MODE In P-ATTI Mode. SPORT MODE In Sport Mode. TRIPOD In Tripod Mode.

Flight Status

TAKING OFF Taking o. LANDING Landing. GOING HOME Returning to Home. MAX ALT. Aircraft has reached maximum altitude. MAX RADIUS Aircraft has reached maximum radius.

OBSTACLE Obstacle detected.

NO FLY ZONE Aircraft is in a No Fly zone.

Intelligent Flight Mode Status

APAS MODE Using APAS.

System Waning and Error Information

SYS WARNING+CHECK APP System Warning. See DJI Pilot for more information. UNACTIVATED+CHECK APP Aircraft not Activated. See DJI Pilot for more information. MAG INTERF+CHECK APP Compass Error. See DJI Pilot for more information. BATTERY ERR+CHECK APP Battery Error. See DJI Pilot for more information. SD ERR+CHECK APP microSD card Error. See DJI Pilot for more information. CALIBRATING IMU Calibrating/Did not restart aircraft after calibration is complete.

STICK ERR+RE-CTR STCK Control stick is not centered. Re-center it. WHEEL ERR+RE-CTR WHEL Left Dial on the remote controller is not centered. Re-center it. STICK ERR Control stick error. Calibrate the control sticks in the DJI Pilot. MECH ERR Remote Controller Error. Calibrate the remote controller in the

SD FULL microSD card is full.

NO PROP No propellers attached. BAT TEMP HI Intelligent Flight Battery is too hot. BATTERY ERR Intelligent Flight Battery error. BAT TEMP LO Intelligent Flight Battery is too cold. LOW BATTERY Intelligent Flight Battery low battery.

RC LOW BAT Remote controller low battery.

NO RC SIGNL Remote controller signal lost. RC TEMP HI Remote controller too hot. NO RTH Aircraft cannot Return to Home.

DJI Pilot. If this problem persists, contact DJI support.

After-Sales Information

Visit https://www.dji.com/support to learn more about after-sales service policies, repair services and support.

DJI Support http://www.dji.com/support

This content is subject to change.

Download the latest version from

http://www.dji.com/mavic-2-enterprise

If you have any questions about this document, please contact DJI

by sending a message to DocSupport@dji.com

is a trademark of DJI.

MAVIC

DJI Mavic 2 Enterprise User Manual [ru]

Specifications and Main Features

Frequently Asked Questions

User Manual

Using This Manual

Legend

Read Before the First Flight

Video Tutorials

Download the DJI Pilot App

Download DJI Assistant 2 for Mavic

Introduction

Preparing the Mavic 2 Enterprise

Preparing the Remote Controller

Aircraft Diagram

Activation

Aircraft

Flight Modes

Aircraft LEDs and Status Indicator

Return to Home

Vision Systems and Infrared Sensing Systems

Advanced Pilot Assistance Systems

Flight Recorder

Password Protection

Attaching and Detaching the Propellers

Intelligent Flight Battery

Gimbal and Camera

DJI AirSense

Modular Accessories

Remote Controller

Using the Remote Controller

Linking the Remote Controller

DJI Pilot App

Manual Flight

Mission Flight (Coming soon)

Album

DJI FlightHub

Flight

Flight Environment Requirements

Flight Limits and GEO Zones

Pre-Flight Checklist

Starting/Stopping the Motors

Test Flight

Appendix

Specifications

Calibrating the Compass

Firmware Updates

Remote Controller LCD Screen Menu Information

After-Sales Information