Diotec
ZMM 1 … ZMM 51 (500 mW)
|
Silizium-Z-Dioden |
Surface mount Silicon-Z-Diodes |
für die Oberflächenmontage |
Dimensions / Maße in mm
Nominal breakdown voltage |
1…51 V |
Nenn-Arbeitsspannung |
|
Standard tolerance of Z-voltage |
± 5 % (E24) |
Standard-Toleranz der Arbeitsspannung |
|
Plastic or glass case MiniMELF |
SOD-80 |
Kunststoffoder Glasgehäuse MiniMELF |
DO-213AA |
Weight approx. – Gewicht ca. |
0.04 g |
Standard packaging taped in ammo pack |
see page 18 |
Standard Lieferform gegurtet in Ammo-Pack |
siehe Seite 18 |
Marking |
2 colored rings denote “cathode” and “value of Z-voltage” (DIN IEC 62) |
Kennzeichnung |
2 farbige Ringe kennzeichnen “Kathode” und “Z-Spannung” (DIN IEC 62). |
Maximum ratings |
|
|
Grenzwerte |
Power dissipation |
T = 25 °C |
P |
500 mW 1) |
Verlustleistung |
A |
tot |
|
|
|
|
|
Z-voltages see table on next page. |
|
|
|
Other voltage tolerances and higher Z-voltages on request. |
|
|
|
Arbeitsspannungen siehe Tabelle auf der nächsten Seite. |
|
|
|
Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage. |
|
|
|
Operating junction temperature – Sperrschichttemperatur |
Tj |
– 50...+175°C |
|
Storage temperature – Lagerungstemperatur |
|
TS |
– 50...+175°C |
Characteristics |
|
Kennwerte |
Thermal resistance junction to ambient air |
R |
< 0.3 K/mW 1) |
Wärmewiderstand Sperrschicht – umgebende Luft |
thA |
|
|
|
1) Valid, if mounted on P.C. board with 25 mm 2 copper pads at each terminal
Dieser Wert gilt bei Montage auf Leiterplatte mit 25 mm 2 Kupferbelag (Lötpad) an jedem Anschluß |
|
232 |
01.01.99 |