Diotec
ZY 3.9 … ZY 200 (2 W)
Silicon-Power-Z-Diodes |
Silizium-Leistungs-Z-Dioden |
Ø 3 ±0.05
Ø 0.8 +0.05
Dimensions / Maße in mm
Nominal breakdown voltage |
3.9…200 V |
Nenn-Arbeitsspannung |
|
Standard tolerance of Z-voltage |
± 5 % (E24) |
Standard-Toleranz der Arbeitsspannung |
|
Plastic case – Kunststoffgehäuse |
DO-15 (DO-204AC) |
Weight approx. – Gewicht ca. |
0.4 g |
Plastic material has UL classification 94V-0 |
|
Gehäusematerial UL94V-0 klassifiziert |
|
Standard packaging taped in ammo pack |
see page 17 |
Standard Lieferform gegurtet in Ammo-Pack |
siehe Seite 17 |
Standard Z-voltage tolerance is graded to the international E 24 standard.
Other voltage tolerances and higher Z-voltages on request.
Die Toleranz der Arbeitsspannung ist in der Standard-Ausführung gestuft nach der internationalen Reihe E 24. Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings |
|
|
Grenzwerte |
Z-voltages see table on next page |
|
|
|
Arbeitsspannungen siehe Tabelle auf der nächsten Seite |
|
|
|
Power dissipation |
T = 25 °C |
P |
2.0 W 1) |
Verlustleistung |
A |
tot |
|
|
|
|
|
Operating junction temperature – Sperrschichttemperatur |
Tj |
– 50…+150°C |
|
Storage temperature – Lagerungstemperatur |
|
TS |
– 50…+175°C |
Characteristics |
|
Kennwerte |
Thermal resistance junction to ambient air |
R |
< 45 K/W 1) |
Wärmewiderstand Sperrschicht – umgebende Luft |
thA |
|
|
|
1) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case |
|
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden |
|
142 |
01.01.99 |