DigiTech CONTROL X User Manual
FOO T CONTROLLER
USER’S GUIDE
DECLARATION OF CONFORMITY
Manufacturer’s Name: DigiTech
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name: Control X
Product option: Control X powered by host unit.
conforms to the following Product Specifications:
Safety: EN 60065 (1993)IEC65 (1985)
with Amendments 1, 2, 3
EMC: EN 55013 (1990)
EN 55020 (1991)
Supplementary Information:
The product herewith complies with the requirements of the Low
Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC as
amended by Directive 93/68/EEC.
DigiTech / Johnson
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: June 6, 2001
European Contact: Your local DigiTech/ Johnson Sales and Service
Office or
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah 84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
Introduction
Congratulations! You have expanded the capabilities of your
GENETX™™ processor by purchasing the DigiTech Control X Foot
Controller.
The Control X is your key to getting the most out of your G
ENETX™
processor as it offers real time control over your sound. The Control X
includes 8 footswitches,a 2 digit numeric display,tuning LEDs, and an
expression pedal,all housed in a rugged steel chassis.
Your DigiTech Control X was carefully assembled and packaged at the factory.
Before you proceed any further,make sure the following items are included:
• User’s Guide
• Control X Foot controller
• 25’ 5 pin DIN cable
• DigiTech warranty card
Please save all packing materials.They were designed to protect the unit from
damage during shipping.In the unlikely event that the unit requires service ,
please use these materials to return the unit to the factory.
NOTE:The Control X is NO
T a MIDI device and is to be used only
with DigiTech G
ENETX™ processors.
Loading...