Quick Start Guide
Ceiling mount bracket for white IP PTZ cameras
DWC-P336CMW
WHAT’S IN THE BOX
3x plastic anchors (6pi) 1x hex Allen wrench
3x tapping screws (6x35) 1x quick setup guide
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
Quick Start Guide
INSTALLING THE MOUNTING ACCESSORY
1. Using the wall mount, mark and drill the mounting holes on the surface using the ceiling mount flange.
2. Pull wires through to connect to the PTZ camera from the ceiling.
3. Using the plastic anchors and screws*, mount and secure the mounting bracket to the mounting surface.
4. Open the access plate and pull out
cables through the rectangular
access hole.
5. Attach the 1.5-inch adapter to the
ceiling mount bracket and fix it
using the set screw.
6. Attach the camera’s safety wire
to the ceiling mount bracket and
organize cables.
7. Close the access plate of the ceiling
mount bracket.
8. Push in and turn the camera
clockwise into the adapter. Fix it
using the set screw of the adapter.
Twist
Start point
(Long indicator)
Safety wire (1x)
Plastic anchor (3x)
Ceiling mount (1x)
Set screw (2x)
Locking nut (1x)
Tapping screw 6x35 (3x)
Socket (1x)
5.07” (129m
4.4” (112mm)
15.75”
(400mm)
4.7” (120m
m)
m)
Machine screw M5x6 (1x)
Set point
(Short indicator)
3x 0.25” (6.5mm)
Pipe socket PF 1.5 inch (1x)
Set screw (3x)
Adapter PT 1.5 inch (1x)
Set screw (1x)
Rev Date: 01 /20
Speci fications an d prici ng are su bjec t to chan ge without noti ce.
Copyright © Digital Watch dog. All rights rese rved .