Digital Watchdog DWC-P20WM2 User Manual

Quick Start Guide

Wall Mount Bracket for Dome Cameras

DWC-P20WM2

WHAT’S IN THE BOX

Wall Mount Bracket

NOTE Download All Your Support Materials and Tools in One Place

1. Go to: http://www.digital-watchdog.com/support-download/

2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will

populate automatically based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and rmware will appear in the results.

Attention: This document is intended to serve as a quick reference for initial set-up. It is recommended that the user read the entire instruction manual for complete and proper installation and usage.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

1 Set QSG Manual 1 Set

digital-watchdog.com

Quick Start Guide

INSTALLING THE MOUNTING ACCESSORY

Attach the wall mount bracket to the structure using the tapping screw (PLASTIC ANCHOR, PTS1 M6x40L) as illustrated in the gure. The wall mount bracket must be attached to a structure such as hardwood, wall stud, concrete or a suitable material capable of supporting the nal mount assembly. The installer may need to change the method of mounting or hardware used depending on the wall material. Use the machine screw to align the wall mount bracket holes to dome housing holes.

CABLE ASSEMBLY MODE DOME HOUSING ASSEMBLY MODE

Rev Date: 02/17

WALL MOUNT BRACKET ASSEMBLY MODE

Specications and pricing are subject to change without notice.