Specification Sheet
Titan LED 1080p 3D
2,000* ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:114-461
Colour System: |
|
DMD Specification: |
|
3-chip DLP® |
|
1920 x 1080 pixels native. |
|
|
|
Fast transit pixels for smooth greyscale and improved contrast. |
|
Display Type: |
|
Aspect Ratio: |
|
3 x 0.95" DarkChip™ DMD™ |
|
16x9 |
|
|
|
Fill Factor |
|
|
87% |
|
|
Key Features
Digital Projection has developed a variant of its Titan projector that incorporates the latest LED illumination technology to provide amazing quality images.
These LEDs remain stable and consistent over many years of use, providing a colour gamut that goes way beyond the requirements of HDTV or cinema.
The stability of the colour and luminance is of particular value in multi-projector installations. The very high frame rate, low latency capabilities are perfectly suited to simulation.
Coupled with Digital Projection's advanced video processing technology, the new light sources provide the ideal reference quality display for home theatre, post production, visualisation and simulation installations.
*Takes into account Helmholtz-Kohlrausch effect. LED illuminated projectors produce extraordinarily high colour purity and saturation, thus appearing brighter than a lamp-based display with similar measured lumen specifications.
Standard Inputs (1-8): Front End Video Capabilities
Video & Graphics Processing
High bandwidth digital & analog receiver with 10 bit A-D.
Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
Displayed image frame locked to input with as low as 1 frame total latency.
24p and 1080p native display.
Image enhancement for MPEG, Mosquito noise & color transients in composite sources.
Geometry Correction
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Non-linear Warp adjustment by moving points on an interpolated grid.
Edge Blending
Semi-automated multi projector tiling
Correction for non-active pixels at the edge of the display.
Super Image Clarity
Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.
Picture in Picture
Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
ColorMax™
Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary color targets.
High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency
Pixel mapped to the display.
Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
FastFrame™ Smear Reduction.
Dual Pipe processing: two sources in parallel for left and right eyes. 
Synchronisation of active glasses or polarising switcher.
Projector Controller Software
Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant. HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA. Component Video (SD and HD) via YPrPb, RGB or RGBS. S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI)
Loading...