Desa 000-30, 000BTu, 10 User Manual

Infra-Red Heater Tank Top Heater
kl
s
u
i
e
j
l
b
oe
k
l
h
i
k
o
kl
e
,
,
;
l
o
g;
e
;;
p
d
l
;
l kl
s
u
ie
j
lb
k
f
d
s
f
g
h
f
gh
f
d
g
h
l
kr
j
t
y
r
e
ti
4
m
f
i
f
je
o
c
m
a
z
n
k
l
s
ui
e
j
lb
o
e
k
lh
i
ko
k
l
e
,,;
l
o
g
;
e
;;
p
dl
;
l kl
s
ui
ej
l
b
k
f
d
f
gs
d
f
g
h
yu
r
r
t
l
lc
v
b
j
er
g
m
a
zn
b
w
sj
d
s
g
g
;
e
klsu
i
e
j
l
b
o
e
k
l
h
i
k
o
kl
e ,,
;
l
o
g;
e
;;
p
dl
;
l
k
l
suie
j
lb
k
f
d
s
f
g
h
h
lk
r
j
ty
re
t
i
4m
f
i
fj
e
o
c
ma
z
n
klsu
i
e
j
l
b
oe
k
l
h
i
k
o
kl
e
,,
;
log;
e
;
;p
d
l;
l
k
l
s
u
i
e
jl
b
k
f
d
s
f
g
h
f
g
h
f
dg
h
l
k
r
jt
y
re
ti
4m
fi
f
j
e
o
c
m
a
z
n
kf
d
s
fg
h
f
gh
fd
g
h
l
kr
j
t
y
r
e
t
i4
m
fi
f
j
eo
c
m
a
z
n
kl
s
u
i
e
j
l
b
o
e
k
lh
i
k
o
k
l
e
,,
;
l
og
;
e
;;
p
dl
;
l
k
l
s
ui
e
j
l
b
kf
d
s
fg
h
fg
h
fd
g
h
l
k
r
j
t
y
re
ti4m
fi
f
j
e
oc
ma
z
n
k
l
s
u
i
e
j
l
b
o
e
k
lh
i
k
o
kl
e
,
,
;
l
o
g;
e
;;
p
d
l
;
l
kl
s
u
ie
j
lb
k
f
d
s
f
g
h
f
g
h
fdg
h
l
k
r
j
t
y
r
e
t
i
4m
fi
fj
e
o
c
ma
zn
kl
s
u
i
e
j
l
b
o
e
k
l
h
i
k
o
k
f
d
f
g
s
d
fg
h
y
u
r
r
t
l
lcvb
j
e
rg
klsu
i
e
j
l
b
o
e
k
l
h
i
k
o
kl
e ,,
;
l
o
g
;
e
;;
p
dl
;
l
kl
s
ui
e
j
l
b
k
f
d
s
fg
h
f
gh
fdg
h
l
kr
j
ty
r
e
ti4m
fi
f
j
e
oc
ma
zn
kl
s
u
i
ej
l
b
oe
k
l
h
i
ko
k
l
e
,
,;
l
og
;
e
;;
p
dl
;
l
k
l
su
ie
j
l
b
kf
d
s
fg
h
f
g
h
fdg
h
l
k
r
jt
y
re
ti
4m
f
i
f
j
e
o
c
m
az
n
kl
s
u
i
e
j
l
bk
fd
fg
s
df
g
h
yu
r
rt
l
l
cv
b
j
e
rg
ma
z
n
Owner’s Manual
Two burner
Tank Top
shown
SINGLE BURNER MODELS
10,000-15,000 BTU
DUAL BURNER MODELS
10,000-30,000 BTU
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to appli­ance.
2. Extinguish any open
ame.
WARNING
CARBON MONOXIDE HAZARD This appliance can produce carbon mon­oxide which has no odor.
Using it in an enclosed space can kill you. Never use this appliance in an enclosed
space such as a camper, tent, car, or home.
Save this manual for future reference.
For more information, visit www.desatech.com
FOR YOUR SAFETY
Do not store or use gaso-
line or other ammable
vapors and liquids in the vicinity of this or any other appliance.
IMPORTANT: Read and understand this manual before assembling, starting or servicing heater. Improper use
of heater can cause serious injury. Keep this manual for future reference.
GENERAL HAZARD WARNING:
Failure to comply with the precautions and instructions provided with this heater, can result in death, serious
bodily injury and property loss or damage from hazards of re, explosion, burn, asphyxiation, carbon monoxide
poisoning, and/or electrical shock. Only persons who can understand and follow the instruc-
tions should use or service this heater. If you need assistance or heater information such as an in-
structions manual, labels, etc. contact the manufacturer.
Specications ...................................................... 2
TABLE OF CONTENTS
Safety Information ............................................... 3
Assembly Instructions.......................................... 4
Operating Instructions ......................................... 5
Maintenance and Storage ................................... 6

SPECIFICATIONS

15,000 BTU/HR MODELS
• Rating: 10,000 - 15,000 Btu/hr (3.0 - 4.4 kW)
• Type of Gas: Propane/LP Only
• Ignition: Match Light
• Gas Supply Pressure to regulator: Max - Tank Pressure, Min - 20 psi (1.37 bar)
• Regulator Outlet Pressure: 10 - 18 psi (0.68 bar
- 1.2 bar)
• Minimum Ambient Temp. Rating: 0° F (-17.8° C)
• Fuel Consumption per 20 lb. Cylinder: 36 hours
Servicing .............................................................. 7
Technical Service................................................. 7
Replacement Parts .............................................. 7
Illustrated Parts Breakdown and Parts List.......... 8
Warranty and Repair Service ............................ 10
30,000 BTU/HR MODELS
• Rating: 10,000 - 30,000 Btu/hr (3.0 - 8.8 kW)
• Type of Gas: Propane/LP Only
• Ignition: Piezo
• Gas Supply Pressure to regulator: Max - Tank Pressure, Min - 20 psi (1.37 bar)
• Regulator Outlet Pressure: 10 - 18 psi (0.68 bar
- 1.2 bar)
• Minimum Ambient Temp. Rating: 0° F (-17.8° C)
• Fuel Consumption per 20 lb. Cylinder: 18 hours
www.desatech.com
117240-01C2

SAFETY INFORMATION

WARNING: This product con­tains and/or generates chemicals known to the State of California
to cause cancer or birth defects,
or other reproductive harm.
WARNING: Not for home or recreational vehicle use.
WARNING: Fire, burn, inhala­tion, and explosion hazard. Keep solid combustibles, such as build­ing materials, paper or cardboard,
a safe distance away from the
heater as recommended by the
instructions. Never use the heater in spaces which do or may contain
volatile or airborne combustibles,
or products such as gasoline, sol­vents, paint thinner, dust particles or unknown chemicals.
ASPHYXIATION HAZARD
• Do not use this heater for heating human living quarters.
• Do not use in unventilated areas.
• The ow of combustion and ventilation air must not be obstructed.
• Proper ventilation air must be provided to support the combustion air require­ments of the heater being used.
• Refer to the specification section of the heater’s manual, heater data plate, or contact DESA Heating Products to
determine combustion air ventilation
requirements of the heater.
• Lack of proper ventilation air will lead
to improper combustion.
• Improper combustion can lead to car­bon monoxide poisoning leading to
serious injury or death. Symptom of
carbon monoxide poisoning can include headaches dizziness and difculty in breathing.
1. Keep children and animals away from heater.
2. Never operate heater while sleeping or unat­tended.
3. Check the heater thoroughly for damage. Do not operate a damaged heater.
4. Do not modify the heater or operate a heater
which has been modied from its original
condition.
5. Use only propane/LP gas.
6. Use only vapor withdrawal propane/LP supply. If there is any question about vapor withdrawal, ask your propane/LP dealer.
7. For outdoor use only. Area must be well ventilated. Provide minimum openings of
1 sq ft (0.093m²) near the oor and 1 sq ft.
(0.093m²) near the ceiling. Do not use inside house, camper, tent, vehicle, or any type of unvented or enclosed area.
8. Do not use heater in basement or below ground level.
9. Before connecting heater to the propane/LP tank, make sure the heater regulator knob is in the "OFF" position. Always connect and
light heater in areas free of open ames.
10. Mount the propane/LP cylinders vertically (shutoff valve up). Secure them from falling or being knocked over and protect them from damage.
11. IMPORTANT: Use only the hose and regulator assembly provided with the dual burner tank top heater. Inspect the hose assembly before each use. If there is excessive abrasion or wear, or hose is cut, replace with hose assembly listed on parts list before using heater. The hose and regulator must be protected from damage.
12. The heater burner must be at least 2 ft. (0.61m)
above the oor. Always attach to propane/LP
tank in an upright position. Never operate a heater on its side or attach to propane/LP tank in a horizontal position. This could lead
to dangerous are-ups or re. Do not direct
heat toward propane/LP cylinders.
13.
Maintain minimum clearance from nor­mal combustible materials (like paper) as follows: Sides - 3 ft. (0.91m); Front - 5 ft. (1.5m). Locate 10 ft. (3m) from canvas or plastic tarpaulins or similar cover-
ings and secure them to prevent apping or
movement due to wind action.
14. If at any time gas odor is detected, IMME­DIATELY DISCONTINUE operation until the source of gas has been located and cor­rected.
Top and
117240-01C 3
www.desatech.com
SAFETY INFORMATION
Continued
15. Install the heater such that it is not directly exposed to water spray, rain, dripping water and/or wind.
16. Operate only on a stable, level surface.
17. Due to the high surface and exhaust tempera­tures, adults and children must observe clear­ances to avoid burns or clothing ignition.
18. Do not move, handle or service while hot or burning. Do not attach or remove a hot or operating heater from the propane/LP tank.
19.
Before each use, check heater for leaks. Never
use an open ame to check for leaks. Apply a
mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks.
20. Keep all connections and ttings clean. Make
sure propane/LP tank valve is clean. Check "O" ring on heater inlet fuel valve connector for damage before each use. Replace if worn or damaged.
21. Use only in accordance with local codes or, in the absence of local codes, with the Standard
for the Storage and Handling of Liqueed Pe­troleum Gases ANSI/NFPA 58 and CSA B149.1, Natural Gas and Propane Installation Code.
ASSEMBLY
INSTRUCTIONS
30,000 BTU MODELS ONLY
1. Inspect the heater components for possible shipping damage. If any is found, immediately notify the dealer. Check to make sure that all components are included with your heater (see pages 8 and 9).
2. Insert the piezo ignitor into the bracket on the burner support bracket as shown in Figure 1. Tighten the piezo mounting nut. Do not over tighten the nut.
3. Connect the burner hoses together as shown in Figure 2. Wrench tighten to insure leak tight connection.
4. Mount the burner assembly onto the support arm using the burner head mounting brackets and brass screws as shown in Figure 3. Place side of bracket into the slot on support arm. Se­cure with screw. Make certain that the air holes on the sides of the burner tube are not blocked. Securely tighten the burners into place.
5. Attach the electrode wires to the piezo ignitor as shown in Figure 4.
Piezo Ignitor
Piezo Mounting Nut
Burner Support Bracket
Figure 1 - Installing Piezo Ignitor
Figure 2 - Attaching Burner Hoses to
Brass Screw
Figure 3 - Attaching Burner Head
Assembly to Support Arm
Figure 4 - Attaching Electrode Wires to
Regulator
Burner Head Assembly
Slot
Air Hole
Burner Head Mounting Bracket
Piezo Ignitor
Electrode Wires
Piezo Ignitor
Support Arm
www.desatech.com
117240-01C4
OPERATING
INSTRUCTIONS
1. Check heater for damage. If heater is damaged, promptly inform dealer where you bought heater.
2. Follow all of the safety and operating pre­cautions.
3. Check the "O" ring on the POL before each use. Replace the "O" ring if there is any sign of wear or damage.
4. Make sure heater regulator knob is in the "OFF" position.
5. 30,000 Btu Models Only Attach the heater to the guard on the propane/LP cylinder with the support arm on the inside of the guard and bolts through two holes in the guard (see Figure 5). Tighten the support arm bracket into place us­ing the wing nuts provided.
6. For All Models Connect the POL fitting at regulator to the propane/LP cylinder by rotating the POL nut counter clockwise into the propane/LP cylinder's valve outlet and securely tighten with a wrench.
WARNING: Attach heater in
upright position. Never attach
heater in a horizontal position.
This could lead to dangerous
are-ups or re.
7. Securely tighten all gas connections.
8. Open the cylinder's gas valve and check all connections for leaks. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak that must be corrected. DO NOT USE A FLAME.
Support Arm Bracket
Bolt
Support Arm
TO START HEATER
WARNING: When lighting
the heater DO NOT look over
top of heater (reector). Stand
to the side of the heater during ignition. Do not stand or have
any part of your body in front
of the heater.
WARNING: MAKE SURE THERE IS NO OPEN FLAME IN THE AREA. Fully open the valve on the propane/LP cylinder.
Read all lighting instructions before attempting to ignite heater.
1. Turn the heater regulator knob counterclock­wise to the "HI" position.
2. Repeatedly push and release the piezo ignitor (dual burner), or place a lighted match near the face of the heating element (mesh screen) of the burner you are lighting, using the hole located
on the side of the reector. See Figure 6.
CAUTION: Do not light at the
orice.
3. Depress the red button on the safety valve admitting gas to the burner (see Figure 6).
WARNING: Do not depress red
valve button before repeatedly activating the piezo or inserting
match.
Red Button
Regulator
Figure 5 - Attaching Support Arm and
Regulator to Propane/LP Tank
117240-01C 5
www.desatech.com
Figure 6 - Lighting Heater With a Match
on Safety Valve
OPERATING INSTRUCTIONS
Continued
4. When the gas on the face of the mesh screen lights, continue to hold the valve button de­pressed for 30 seconds, then release.
5. If ame goes out, wait 5 minutes and repeat
the lighting procedure.
6. If heater will not light after repeated tries, do not attempt to repair heater. Return heater to nearest authorized service center or to manu­facturer of this product.
7. For dual burner models, repeat steps 1 through 4 to ignite the other burner.
8. After both burners or single burner, are lit, turn the heater regulator knob to the desired heat setting (LOW, MED, HI).
TO STOP HEATER
1. Securely close valve on the propane/LP cylinder.
2. Turn the heater regulator knob to the "OFF" position. Wait 15 minutes for the heater to cool down before handling heater.
3. Always remove the heater from the propane/ LP tank after each use. Do not store the heater while attached to propane/LP tank. Remove the heater from the propane/LP tank by turn­ing the fuel connector nut clockwise. Always store propane/LP tank outdoors. Never store propane/LP tank in an enclosed area.
TO RESTART HEATER
1. Securely close valve at propane/LP cylinder.
2. Wait 5 minutes.
3. Restart following To Start Heater procedure, page 5.
MAINTENANCE AND
STORAGE
1. Inspect heater before each use. Check connec­tions for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak that must be corrected. Correct all leaks at once. Have heater inspected at least
annually by a qualied service person.
2. Before each use, check the soft "O" ring seat
at the bullnose of the POL tting. If the "O"
ring is cut, scuffed, or otherwise damaged, replace it with part number 6681.
3. Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace.
3. Turn off the gas at the propane/LP gas supply cylinder when the heater is not in use.
4. When the heater is to be stored, the connection between the propane/LP gas supply cylinder and the heater must be disconnected and the cylinder removed from the heater and stored out of doors and in accordance with Chapter 5 of the standard for Storage and Handling of Liqueed Petroleum Gases ANSI/NFPA 58.
www.desatech.com
117240-01C6

SERVICING

A hazardous condition may result if a heater is
used that has been modied or is not functioning
properly. When the heater is working properly:
The emmitter screen is glowing bright orang-red.
• There are no ames above the burner.
• The ame is burning on the surface of the screen and not inside the burner (ashback).
• There is no strong disagreeable odor, eye burn­ing or other physical discomfort.
• There is no smoke or soot internal or external to the heater.
• There are no unplanned or unexplained shut downs of the heater.
The parts lists and exploded view show the heater as it was constructed. Do not use a heater which is different from that shown. In this regard, use only
the hose, regulator and cylinder connection tting (called a POL tting) supplied with the heater.
IMPORTANT: For this heater, the regulator must be set as shown in Specications, page 2. If there is any uncertainty about the regulator setting, have it checked.

TECHNICAL SERVICE

A heater which is not working right must be re­paired, but only by a trained, experienced service
person. To nd the service center closest to you,
or if you have further questions about this heater, contact DESA Heating Products’ Technical Service Department at 1-866-672-6040. When calling, please have your model and serial numbers of your heater ready.
You can also visit DESA Heating Products’ Techni­cal Service web site at www.desatech.com. You may also obtain in-warranty or out-of-war-
ranty service by taking the product to your local service center.

REPLACEMENT PARTS

WARNING: Use only original
replacement parts. This heater
must use design-specic parts. Do not substitute or use generic
parts. Improper replacement parts could cause serious or fa­tal injuries. This will also protect your warranty coverage for parts replaced under warranty.
PARTS UNDER WARRANTY
Contact authorized dealers of this product. If they can’t supply original replacement part(s), either contact your nearest Parts Central or call DESA Heating Products’ Technical Service Department at 1-866-672-6040.
When calling DESA Heating Products, have ready
• your name
• your address
• model number of your heater
• how heater was malfunctioning
• purchase date
PARTS NOT UNDER WARRANTY
Contact authorized dealers of this product. If they can’t supply original replacement part(s), either contact your nearest Parts Central (listed in Authorized Service Center booklet) or call DESA Heating Products at 1-866-672-6040 for referral information.
When calling DESA Heating Products, have ready
• model number of your heater
• the replacement part number
117240-01C 7
www.desatech.com
ILLUSTRATED PARTS BREAKDOWN
2
1
2
3
4
6
7
5
8
18
9
10
11
12
17
13
14
15
1
16
16
MODELS SPC-30RG, HD30G, TT30G
www.desatech.com
117240-01C8
PARTS LIST
2
12
13
14
1
16
This list contains replaceable parts used in your heater. When ordering parts, follow the instructions listed under Replacement Parts on page 7 of this manual.
MODELS SPC-15RG, HD15G, TC108, TC109, TT15G
KEY NO. PART NO. DESCRIPTION QTY.
1 114092-01 Burner Head Assembly • • 1-2 2 100911-01 Grille • • 1-2 3 097159-05 Piezo Ignitor 1 4 102334-01 Nut, Piezo 1 5 114095-01 Support Arm 1 6 114099-01 Burner Head Mounting Bracket 2 7 114145-01 Brass Screw 2 8 114093-01 Hose Assembly 2 9 114096-01 Support Arm Bracket 1 10 114098-01 Fitting 1 11 114097-01 Fitting 1 12 LPA2025 POL Excess Flow/Regulator • • 2-1 13 114100-01 Thermocouple • • 1-2 14 100898-01 Thermocouple Nut • • 2-4 15 114094-01 Electrode Assembly (Round) 1
114094-02 Electrode Assembly (Flat) 1 16 116995-01 Rear Guard • • 1-2 17 115063-01 Wing Nut • • 2 18 115062-01 Shoulder Bolt 5/16-18 x 1.25 • • 2
114091-07 Instruction Hang Tag (English) 1
PARTS AVAILABLE - NOT SHOWN
114091-10 Instruction Hang Tag (English) 1
114091-08 Instruction Hang Tag (Spanish) 1
114091-11 Instruction Hang Tag (Spanish) 1
114091-09 Instruction Hang Tag (French) 1
114091-12 Instruction Hang Tag (French) 1
LPA5050 Replacement Screen Assembly • • 1-2
117240-01C 9
www.desatech.com
30,000 Btu
15,000 Btu

WARRANTY AND REPAIR SERVICE

KEEP THIS WARRANTY
Model
Serial No.
Date of Purchase
LIMITED WARRANTIES FOR NEW AND FACTORY
RECONDITIONED PRODUCTS
New Products: DESA Heating Products warrants this heater and any parts thereof, to be free of defects in materials
and workmanship for one (1) year from the date of rst purchase, when operated and maintained in accordance
with the manufacturer's instructions. These warranties are extended only to the original retail purchaser, when proof of purchase is provided.
Factory Reconditioned Heaters: DESA Heating Products warrants this factory reconditioned heater and any parts
thereof, to be free of defects in materials and workmanship for thirty (30) days from the date of rst purchase,
when operated and maintained in accordance with the manufacturer's instructions. These warranties are extended only to the original retail purchaser, when proof of purchase is provided.
This warranty is extended only to the original retail purchaser. This warranty covers only the cost of parts required to restore this heater to proper operating condition. Warranty parts must be obtained through authorized dealers of this product and/or DESA Heating Products who will provide original factory replacement parts. Failure to use original factory replacement parts voids this warranty. The heater must be used in accordance with all local codes and instructions furnished with the unit.
This warranty does not apply to parts that are not in original condition because of normal wear and tear, or parts that fail or become damaged as a result of misuse, accidents, lack of proper maintenance, alteration, tampering, contaminated fuels, or defects caused by improper installation. Travel, transportation and incidental costs associated with warranty repair are not reimbursable under this warranty and are the responsibility of the owner.
To the full extent allowed by the law of the jurisdiction that governs the sale of the product: This express war-
ranty excludes any and all other expressed warranties of merchantability and tness for a particular purpose to ONE YEAR from the date of rst purchase: and DESA HEATING PRODUCTS’ liability is hereby limited to
the purchase price of the product and DESA HEATING PRODUCTS shall not be liable for any other damages whatsoever including indirect, incidental or consequential damages.
Some states do not allow a limitation on how long an implied warranty lasts or an exclusion or limitation of incidental or consequential damages, so the above limitation on implied warranties, or exclusion or limitation on damages may not apply to you.
This warranty provides the original retail purchaser with specic legal rights. For specic information regarding
those rights, please consult the applicable state laws.
2701 Industrial Drive P.O. Box 90004 Bowling Green, KY 42102-9004 ATTN: Customer Service Department
117240-01
Rev. C 05/06
Loading...
+ 22 hidden pages