Denver GSP-110 User Manual
Senior Phone
GSP-110
www.facebook.com/denverelectronics
User Guide
English, Deutsch, Dansk,
Suomalainen, Svenska,
Français, Nederlands,
Español, Italiano
English-1
Start to Use-----------------------------------------------2
Put in/Take out battery------------------------------2
Insert/Take out SIM card---------------------------5
Battery Charging-------------------------------------6
Your Phone------------------------------------------------8
Stand by Mode------------------------------------- 8
Key Functions----------------------------------------11
Voice Dial-------------------------------------------------13
Emergency Dial-------------------------------------13
Make an International Call--------
----------------15
Dial extension No. of a Fixed line---------------15
Speed Dial--------------------------------------------16
English-2
Start to Use
Put in/Take out battery
Put in battery
1. Open the battery cover
2. Put battery into the battery slot. Keep three
metal points of battery facing downward and
matching with the three metal connection
points on phone.
English-3
3. Put on battery cover. Make sure that cover is
completely matched and the cover matching
sound could be heard.
Take battery out
1. Open battery cover.
2. Press the battery side and lift it up to take it out
from battery slot.
English-4
3. Close the cover. Make sure that cover is
completely matched and the cover matching
sound could be heard.
English-5
Remark：Shut down all devices and cut the
connection with charger when removing
battery. Please use battery which is matched
with this phone only.
Insert/Take out SIM card
1. Insert SIM card：
Remove battery cover；
Insert and slide the SIM card with the metal
part facing downward by following below
arrow direction at battery slot until SIM card
is completely inserted in right position.
2. Take out SIM card：
Hold the notch of SIM
card and lift it slightly up by the other hand to
take card out.
English-6
Remark：Phone must be power off when put
in and take out battery.
SIM card and the contact point will be
easily damaged due to scratch and bending.
Please be careful when inserting and
taking out the SIM card.
Battery Charging
Phone could be charged when phone is
power off or power on.
Make sure that battery is inserted in
phone before charging.
1. Plug in the charger.
English-7
2. Plug out the charger from power jack first
after it is charged. Then unplug charger
from phone.
English-8
Remark： Battery indication will be
displayed after several minutes if
battery is over-discharged.
Battery Level Indication Bar
Charging
Charged
Not enough battery alert
Phone will give alert when battery is not enough
and display a message of low battery on screen.
Please charge battery. Please charge battery
when you receive the alert of low battery during
calling in order to keep the calling.
Your Phone
Stand by Mode
When phone is ready to use but no operation
is done on phone, then phone is under stand
by mode.
English-9
11
1
2
3
4
8
10
5
6
7
9
English-10
Icons on Screen
Icons might be displayed on screen.
Battery status
Signal status
Alarm
Message Full
Missed call
Silent mode
Headset
No SIM
When listening FM
When playing
music
BT
When on call
Flight mode
When SOS
procedure does
not finish
Vibration mode
English-11
Key Functions
Key
No
Key Name
Functions
3
Navigation
Up key
Standby mode：press
to enter main menu
Operating ： press to
move cursor up
4
Answer Key
(Green
key)
Press to call out:
press to pick up
phone when there is
incoming call.
Standby mode：press
to enter call list
Operating ： Press to
confirm the function
you choose.
5
Navigation
Down key
Standby mode：press
to enter phonebook
Operating ： press to
move cursor down
6
End Key
(Red Key)
Phone Off ： Long
press to switch on;
Phone On ： Long
press to switch off;
Operating ： Press to
go back to previous
English-12
menu
Long press it at
non-editing screen to
go back to standby
screen.
7
Numeric
key
Press to input
numbers or letters
8 * key
Standby mode：Long
press to call the set
number directly;
Short press to type in
*，P.
Editing mode: Press
to use normal
symbol.
9 # key
Standby mode：Long
press to set phone
silent mode, short
press to type in #.
Editing mode： Press
to switch typing
method.
10
Handfree
mode
Input digit 0 and
open/Close handfree
mode during on call.
English-13
11
SOS
BUTTON
Emergency Call is
ON：Long press to
dial emergency call
Emergency Call is
OFF：Long press this
key. It will prompt out
a message
Reopened? Then
press answer key to
set it on.
Voice Dial
Emergency Dial
How to set emergency dialing status：Contact
Emergency number Status. Set it as ON or
OFF.
When SIM card is inserted：
1. When emergency call is set ON: you can long
press SOS button at phone back side to dial the
emergency number if you already set it.
2. When emergency call is set OFF: you can long
press SOS button at phone back side. It will
prompt a message on phone screen:
Reopened? Then you can press answer key to
set it on.
3. When emergency call is set ON: phone will
English-14
send a message to set emergency numbers
and then call those numbers one by one if you
already set the emergency call number. There
will be 3 calling cycles. It will call next number
if previous number is failed to connect.
4. Phone will send out alerting sound when it is
sending message and calling to set emergency
numbers.
5. If all emergency numbers are dialed but without
answering, then phone will be in emergency
mode within one hour. In this case, phone will
pick up incoming call and activate hand free
mode automatically (only pick up one incoming
call). After that, phone will go back to normal
status. That means you need to press green
key to pick up incoming calls. During dialing
emergency calls, if one of calls is connected,
then phone will return to normal status after this
call is end.
Hang up the call：Long press End button to hang
up the call during calling out or in.
Long pressing SOS button at any condition
will let phone return to standby mode
automatically. Long pressing the button will not
activate the emergency call during Keypad lock
mode .
English-15
Remark： In every country where it can use GSM
network, you can use emergency dialing service if
you are in network covering range (you can check
the network strength indicator on left upside of
phone screen to know whether you are in the
range or not). If your network provider doesn’t
provide roaming service at that area, then it will
show EMERGENCY CALLS ONLY on phone
screen. That means you can only call emergency
numbers. If you are in the range of network
covering, you can dial emergency number without
SIM card.
Make an International Call
1. Press 0 key for twice times and sign “+ ” will
come out. Then enter country code, area code
and phone number (without a zero in front of
mobile phone number) Press Send key to enter
voice dial to call out.
2. Dial a fixed line: “＋”country code + entire
phone number + Send key.
Dial extension No. of a Fixed line
Some extension numbers of fixed line couldn’t be
dialed directly. You need to dial telephone
exchange first and then dial the extension number.
Ty
pe in a P symbol between telephone exchange
number and extension number, this phone will
English-16
dial the extension number automatically. Follow
below method to make a symbol P: short press *
key for twice times. Then it will display a P symbol
on screen.
Speed Dial
If you already set the speed dial numbers, then
you can long press number key 2 to 9,* key to
dial set numbers out under standby mode. Long
pressing number key 1 is to dial to voice mailbox
if you already set the mailbox number.
Radio frequency (RF) exposure and SAR
THIS DEVICE MEETS INTERNA
TIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
Your mobile device is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the limits for exposure to radio frequency
(RF) recommended by international guidelines
(ICNIRP). These limits are part of comprehensive
guidelines and establish permitted levels of RF
energy for the general population. The guidelines
were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific
studies. The guidelines
include a substantial safety margin designed to
assure the safety of all persons, regardless of age
and health.
English-17
The exposure standard for mobile devices
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
stated in the international guidelines is 2.0
watts/kilogram (W/kg)*. Tests for SAR are
conducted using standard operating positions
with the device transmitting at its highest certified
well below the maximum value. This is because
the device is designed to operate at multiple
power levels so as to use only the power required
t
o reach the network. In general, the closer you
are to a base station, the lower the power output
of the device. power level in all tested frequency
bands.
Although the SAR is determined at the highest
certified power level, the actual SAR of the device
while operating can be well below the maximum
value. This is because the device is designed to
operate at multiple power levels so as to use only
the power required to reach the network. In
general, the closer you ar
e to a base station, the
lower the power output of the device.
SAR values may vary depending on national
reporting and testing requirements and the
network band. Use of device accessories and
enhancements may result in different SAR
values.
* The SAR limit for mobile devices used by the
public is 2.0 W/kg averaged over 10 grams of
English-18
body tissue. The guidelines incorporate a
substantial margin of safety to give additional
protection for the public and to account for any
variations in measurements. SAR values may
vary depending on national reporting
requirements and the network band.
The highest SAR value for this model phone
tested for use is 0.743 mW/g
Electric and electronic equipment and included
batteries contains materials, components and
substances that can be hazardous to your health
and the environment, if the wast
e material
(discarded electric and electronic equipment and
batteries) is not handled correctly.
Electric and electronic equipment and batteries is
marked with the crossed out trash can symbol,
seen below. This symbol signifies that electric
and electronic equipment and batteries should not
be disposed of with other household waste, but
should be disposed of separately.
As the end user it is important that you submit
your used batteries to the approriate and
designated facility. In th
is manner you make sure
that the batteries are recycled in accordance with
legislature and will not harm the environment.
English-19
All cities have established collection points, where
electric and electronic equipment and batteries
can either be submitted free of charge at recycling
stations and other collection sites, or be collected
from the households. Additional information is
available at the technical department of your city.
ALL RIGHTS RESERVED
DENVER ELECTRONICS A/S
WWW.DENVER-ELECTRONICS.COM
Importer:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 EGAA
DENMARK
Hereby, Inter Sales A/S, declares that this senior
mobile phone DENVER GSP-110 is in
compliance with the essential requirements and
English-20
other relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity may be
obtained at
Inter Sales A/S, Stavneagervej 22, DK-8250 Egaa,
Danmark
Code for factory default:1234
Code for security password:1234
Senior Telefon
GSP-110
www.facebook.com/denverelectronics
Bedienungsanleitung
Deutsch
Deutsch-1
10
12
12
14
14
15
Deutsch-2
Akku einsetzen/herausnehmen
Erste Schritte
Akku einsetzen
1. Öffnen Sie das Batteriefach.
2. Setzen Sie den Akku ein. Richten Sie die drei
Kontakte nach unten auf die Kontakte im
Telefon aus.
3. Schließen Sie das Batteriefach wieder.
Achten Sie darauf, dass der Deckel des
Batteriefachs einrastet.
Deutsch-3
Akku herausnehmen
1. Öffnen Sie das Batteriefach.
2. Drücken Sie den Akku an der Seite leicht an
und nehmen Sie ihn heraus.
Deutsch-4
3. Schließen Sie das Batteriefach wieder.
Achten Sie darauf, dass der Deckel des
Batteriefachs einrastet.
Hinweis: Schalten Sie das Gerät aus und
trennen Sie das Ladegerät ab, wenn Sie den
Akku herausnehmen. Benutzen Sie nur den
mitgelieferten Akku.
Deutsch-5
SIM-Karte herausnehmen/einsetzen
1. SIM-Karte einsetzen: Öffnen Sie das
Batteriefach und setzen Sie die SIM-Karte mit
den Kontakten in Pfeilrichtung ein.
2. SIM-Karte herausnehmen: Halten Sie die
SIM-Karte an der Auskerbung und heben Sie
sie etwas an, dann nehmen Sie sie mit der
anderen Hand heraus.
Deutsch-6
Hinweis: Das Telefon muss beim Einsetzen
und Herausnehmen der Karte ausgeschaltet
sein.
SIM-Karte und Kontakte können leicht
verkratzen und beschädigt werden.
Lassen Sie beim Einsetzen und
Herausnehmen der SIM-Karte besondere
Vorsicht walten.
Akku laden
Das Telefon kann im eingeschalteten und
ausgeschalteten Zustand geladen werden.
Der Akku muss vor dem Laden im
Telefon eingesetzt sein.
1. Schließen Sie das Ladegerät an.
2. Ziehen Sie das Ladegerät nach dem
Deutsch-7
Laden erst von der Steckdose ab. Dann
ziehen Sie das Ladegerät vom Telefon
ab.
Hinweis: Die Batterieanzeige leuchtet erst
nach einigen Minuten auf, wenn der Akku
tiefentladen war.
Batterieanzeige
Laden
Geladen
Warnung Akku schwach
Das Telefon zeigt einen Warnhinweis an, wenn
der Akku schwach ist. Laden Sie den Akku nun.
Laden Sie den Akku, wenn der Warnhinweis
während eines Gesprächs erfolgt, ansonsten
schaltet sich das Telefon aus.
Loading...