Denver DVH-1019 MK2 User Manual

DVH-1019 MK2

User Manual

PULL

Safety Rules

WARNING Read all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury. The term electrical device ,as used in the following, refers to mains operated electrical devices (corded) and to battery operated (cordless) electrical devices.

Save these instructions.

1)Work area

a)Keep work area clean and well lit. Cluttered and dark work areas invite accidents.

b)Do not operate the unit on easily inflammable surfaces (e. g. paper, textiles, etc.) Or in inflammable environments. Fire hazard due to occurring heat build-up.

2)Electrical Safety

a)The plugs of electrical devices must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) electrical devices. Unmodified plugs and matching outlets will reduce the risk of electric shock.

b)Do not misuse the cord. Never use the cord for carrying, pulling or unplugging the electrical device. Keep cord away from

heat, oil, sharp edges and moving parts.

Damaged or entangled cords increase the

risk of electric shock.

c) Connect the electrical device to a mains supply that is properly connected to earth.

Socket and extension cord must have an op-

erative protective conductor.

d)Protect the electrical device from rain and moisture. The penetration of water in a battery charger increases the risk of electric shock.

e)Check the electrical device, cable and plug each time before using. Do not use the electrical device when defects are detected. Do not open the electrical device yourself and have it repaired only by qualified personnel using original spare parts.

Damaged electrical devices, cables and plugs increase the risk of electric shock.

3)Service

a)Have repairs performed only by a qualified technician and only using original spare parts. This ensures that the safety of theelectrical device is maintained.

NOTE:

The power cable/disconnect device shall remain easy to operate/disconnect.

CONTENTS

 

CONTENTS......................................................

1

SAFETY PRECAUTIONS................................

2-3

NOTES ON DISCS............................................

4

LOCATION OF CONTROLS............................

5-6

FRONT PANEL...............................................

5

BACK PANEL. ................................................

5

DVD DISPLAY................................................

5

REMOTE CONTROL.......................................

6

CONNECTIONS.............................................

7-9

FUNCTION SETTING..................................

10-14

LANGUANG SETUP......................................

10

VIDEO SETUP...............................................

11

AUDIO SETUP...............................................

12

RATING SETUP.............................................

13

MISC SETUP................................................

14

BASIC OPERATIONS..................................

15-21

PLAY DISCS.................................................

15

SELECT ANGLAES.......................................

16

OSD.............................................................

16

SELECT SUBTITLE.......................................

17

PLAY DISCS IN VARIOUS WAYS................

17-21

OTHERS....................................................

22-23

TROUBLE SHOOTING..................................

22

TECTNICAL SPECIFICATIONS......................

23

SAFETY PRECAUTIONS

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED

OR DEFEATED.AVOID DIRECT EXPOSURE TO BEAM.

CAUTION: HAZARDOUS LASER RADIA-TION WHEN OPEN AND INTERLOCK

DEFEATED.

Denver DVH-1019 MK2 User Manual

SAFETY PRECAUTIONS

3

NOTES ON DISCS

4

LOCATION OF CONTROLS

1

2

3

4

5

6

7

8

9

10

1.STANDBY

 

4.DISC LOADING TRAY

 

7.STOP

 

 

 

2.LED DISPLAY

 

5.OPEN/CLOSE

 

8.3 IN 1 MMC

 

 

 

3.SENSOR

 

6.PLAY/PAUSE

 

9.USB

 

 

 

 

 

 

 

 

 

10.COVER

 

 

 

1.Y.Pb/Cb.Pr/Cr VIDEO OUTPUT 2.VIDEO OUTPUT

3.FRONT LEFT AUDIO OUTPUT 4.CENTER AUDIO OUTPUT 5.SURROUND LEFT AUDIO OUTPUT 6.MASTER LEFT AUDIO OUTPUT 7.MASTER RIGHT AUDIO OUTPUT 8.DIGITAL AUDIO-COAXIAL OUTPUT 9.HDMI OUTPUT

10.S-VIDEO OUTPUT

11.DIGITAL AUDIO-OPTICALOUTPUT 12.FRONT RIGHT AUDIO OUTPUT 13.SUBWOOFER AUDIO OUTPUT 14.SURROUND RIGHT AUDIO OUTPUT 15.SCART OUTPUT

16.POWER ON/OFF

17.POWER IN

5

LOCATION OF CONTROLS

STANDBY

N/P

VIDEO

RANDOM

DEFAULT

GOTO CARD/USB

SETUP

N/P

1

 

2

3

 

 

 

VIDEO

4

 

5

6

 

 

 

RANDOM

7

 

8

9

 

 

 

DEFAULT GOTO

0

 

CARD/USB

 

ZOOM

10+

 

 

MENU/PBC

 

 

 

P

 

 

O

 

 

 

 

 

U

 

 

S

ET

 

 

 

 

D

S

 

 

 

 

OPEN/CLOSE

NUMERIC KEYS

ZOOM

MENU/PBC

OSD

 

 

 

ENTER

TITLE

 

 

 

 

 

 

 

 

 

 

I

 

 

/R

 

T

 

 

 

 

TL

 

L

 

 

E

 

 

PROG

CLEAR MARK

PROG

FAST BACKWARD

PLAY/PAUSE

STOP

FAST FORWARD

LANGUAGE

LANGUAGE ANGLE SUB

 

-T

+

 

 

 

 

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RETURN REPEAT A-B

 

 

 

 

 

 

 

 

 

VOL

RETURN

 

 

 

 

 

 

 

 

 

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REPEAT

 

 

 

STEP

 

SLOW

 

 

 

MUTE

A-B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STEP

FORWARD SLOW

BACKWARD SLOW

ENTER

L/R

MARK

CLEAR PREVLOUS

NEXT

SUB-T

VOL+

VOL-

MUTE

6

Loading...
+ 18 hidden pages