Denver DVD-7742 User Manual
DVD-7742
User Manual
IMPORTANT
Please read this manual carefully before operating the DVD PLAYER.
Keep this manual handy for further reference.
17
19
Front panel
Front and rear panel illustration
7
5
3
6
12
4
STAND BY
1
2
OPEN/CLOSE
3
PLAY/PAUSEY
Rear panel
POWER IN
~110V-~230V
50Hz/60Hz
POWER ON/OFF
4
STOP
5
POWER INDICATOR
6
REMOTE SENSOR
Scart Output
7
TRAY DOOR
MODEL:DENVER DVD-7742
POWER IN:~110V-~230V 50Hz/60Hz 25W
SerialNumber:
Remote control
When use, direct the remote control to the infra-red sensor (within 45 degrees)
Do not put remote control near to the place with high temperature or moisture
Do not put water or any other object on remote control
Do not use new and old batteries or different type batteries together
Please replace batteries when find remote control is out of work or weak sensitivity.
STANDBY
N/P
VIDEO
RANDOM
DEFAULT
GOTO
ZOOM
SETUP
TITLE
PROG
FAST BACKWARD
FAST FORWARD
LANGUAGE
ANGLE
RETURN
REPEAT
FORWARD SLOW
STEP
N/P
VIDEO
RANDOM
DEFAULT
LANGUAGE
RETURN
STEP
ZOOM
SET
TIT
PROG
GOTO
UP
L
E
123
5
4
7
ANGLE
REPEAT
MENU
ENTER
CLEAR
SLOW
6
9
8
10+
0
P
B
C
O
SD
/R
L
MARK
SUB-T
+
A-B
VOL
-
MUTE
OPEN/CLOSE
NUMERIC KEYS
PCB
MENU
OSD
ENTER
L/R
MARK
CLEAR
PREVLOUS
PLAY/PAUSE
STOP
NEXT
SUB-T
VOL+
A-B
VOL-
MUTE
BACKWARD SLOW
DVD+ TV
Notes :
There are five ways of connecting the player s AV output to the TV set:
Scart cable (set the video type to RGB)
POWER IN
~110V-~230V
50Hz/60Hz
SCART
MODEL:DENVER DVD-7742
POWER IN:~110V-~230V 50Hz/60Hz 25W
SerialNumber:
Basic operation
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3. Set the TV to the AV input connected to the DVD player.
4. Turn down the volume on your amplifier, and then power it on.
5. Set the amplifier to the AV input connected to the DVD player.
Step 1: Press the STAND BY,
and the playerwill start, LOAD
is illuminated on the display and
the logo is displayed on TV screen.
Step 2: Press OPEN/CLOSE either
on the front panel or remote control.
The player displays OPEN on
the display. When the tray is open,
please put the disc on the tray with the
label side up. Press OPEN/CLOSE
again to close the disc tray
Step 3: Press the PLAY button on the
front panel or remote control. The
player will automatically read and
identify the disc, display the type and
total time and begin playback.
.
Loading...