Denver DVBC-110HD Instructional Manual

110

Instructional Manual
Betjeningsvejledning
Använderinstruktioner
Benutzerhandbuch

works for

Yousee,

Stofa + more

Important safety instructions to be kept with the product

Please read attentively

To prevent fire and electric shock, do not expose this receiver to
rain or moisture. In order to avoid any possible risk of electric shock,
never attempt to open the unit. In case of breakdown, reparation should
be made by qualified technicians. No part of this unit should be
re

p

aired by users.

WARNING!
Presence of dangerous tension inside apparatus! Do not open. Risk of electric
shock! No part should be repaired by users. The maintenance of the receiver
should be carried out exclusively by qualified persons.

If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or persons of similar qualification in order to avoid
possible danger.

The product must be installed in accordance with national regulations.

The used batteries must be disposed of safely. Throw them in collection bins provided is
prohibited (inquire after your retailer for more details) in order to protect the environment.

Proper Installation

- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.

- Do not place the receiver on top of another device, such as an amplifier. This may lead to
overheating.

- Do not put anything above the unit (for example, CDs or magazines).

Sufficient Ventilation

- Place the receiver in a well-ventilated location to prevent accumulation of internal heat.
Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm
to both sides to avoid overheating.

- Do not obstruct any ventilation openings with items such as newspapers, tablecloths,
curtains, etc.

Protecting the Receiver from High Temperatures, Humidity, Water and Dust

- The receiver should not be exposed to dripping water or splashing.

- No objects filled with liquids, such as vases, shall be placed on the unit.

- Do not place any objects that might damage your unit near it (e.g. liquid filled objects or
candles).

- Do not place any source of flames such as lit candles on the receiver.

- This receiver is to be used in a temperate climate and should not be used in a tropical
climate.

Electricity Supply

- Please unplug the receiver in case of prolonged non-use.

- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or similar qualifications to those to avoid possible
danger.

- This device must be connected to a 230V ~ 50Hz electrical network.

- The plug must remain readily accessible after the installation of the product.

Welcome Section

Congratulations on choosing to buy a DENVER product. By doing so you now have the
assurance and peace of mind that comes with purchasing a product made by one of the
leading manufactory.

Main features

ġ

z Slim size (180mm)
z MPEG-2, MPEG-4(H.264) decoding
z USB2.0 for software update , music ,image, movie and recording
z LCN(Logical Channel Number) supported;
z Parental control
z Favorite lists
z Timer
z EPG/TXT/SUBTITLE supported
z Digital sound through COAXIAL output (S/PDIF)
z PVR ready supported

Automatic Standby: the STB preset to automatically switch from active mode into
standby if 3 hours no interaction and/or channel change from user, with alert message 2
minutes before going into standby. User can choose OFF (turn off this function) or other
hours.

FAQ – DENVER DVB-C

Congratulations with your digital cable-tv tuner. With this settop box you can enjoy digital TV signal, and get HD channels in full
quality.

To get a proper signal you need good cables with proper connectors and assembling. If you don’t have this, it can be hard to receive
proper signal.

This is why it is important to check your cables. Bad assembling and bad quality of assemblings can do so that you don’t get signal at
all, or in best case pixelating channels.

Check your cables.

If possible, the DVB-C box shall be connected directly to the input connector of the house. And you should maximum use 10 meter
cables. If you put more cables in a row (with connectors), you risk to loose a lot of signal, so use one long cable instead of several
with connectors.

It is also important to use double shielded cables, and preferrable of the type with mounted connectors.

x If you need to split the signal to more than one tv, it is best to do this after the box is connected. OR best of all use a

connector box with F-connectors. And not the T-pieces that you use as normal antenna plug.

F-Connector looks like this:

x Please make sure not to make sharp turns on the cable. You risk to damage the inside of the cable this way.

If you follow these rules, you will get digital cable tv in super quality.

Please notice that in some houses it might be necessary to use a signal amplifier. If you use this, make sure it is made for digital cable
tv, and has the proper shielding. It might be a good idea to ask you tv provider what amplifier they suggest.

1. Installation of STB ....................................................................................................... 2

1.1 Front Panel ....................................................................................................... 2

1.2 Rear Panel........................................................................................................ 2

1.3 Connection ....................................................................................................... 3

1.4 Remote ............................................................................................................. 4

2. Installation Guide ........................................................................................................ 5

3. Basic Operation ........................................................................................................... 5

3.1 Program Organizer ........................................................................................... 5

3.2 Installation Guide .............................................................................................. 6

3.3 System Setup ................................................................................................... 6

3.4 Tools ................................................................................................................. 8

3.5 Timers .............................................................................................................. 8

3.6 Record .............................................................................................................. 8

3.7 MutiMeida......................................................................................................... 9

3.7 Audio key .......................................................................................................... 9

3.8 TV Channel and radio Channel list ................................................................... 9

4. Other functions introduction ...................................................................................... 9

4.1 Program information ......................................................................................... 9

4.2 Favorite List .................................................................................................... 10

4.3 EPG (Electronic program guide) ..................................................................... 10

5. Troubleshooting ........................................................................................................ 10