Denon PMA-700V Service Manual 1
Specifications and Main Features
- Output type: Integrated Amplifier
- Rated Power Output: With a minimum of 100 watts RMS per each channel with an 8 ohm impedance
- Distortion level: < 0. 004%( 20hz-20khz at 8 ohm load)
- Input Level: 110mV
- Equalizer Sensitivity: 150mV
- Power Consumption: ~ 230W maximum
- Inputs: Phono, Aux, Tuner, CD, Microphone
- Output Ports: Tape, Video, Two speakers
- Dimensions: Width: 450, Height: 132, Depth: 340
- Net weight: 10.9 kg
- 3.8 A (U.S.A. & Canada)
- 220 W (IEC), 190W (Multiple)
- Dimensions:
- Width: 434 mm (17-5/64")
- Height: 157 mm (6-3/16")
- Depth: 397 mm (15-5/8") – including rubber feet, control knobs, and terminals
- Weight: 10.5 kg (23 lbs 2 oz)
Frequently Asked Questions
Q: How many watts is the PMA-700V rated to output?
A: It is rated at an output which is 100 Watts minimum RMS per channel and 8 ohm of output load.
Q: How does this amplifier perform with regards to total harmonic distortion?
A: The total harmonic distortion is lower than 0.02% at the frequency range from 20 – 20 kHz.
Q: In case a different impedance is applied, will the PMA-700V output remain unaffected?
A: No, it works at these different load impedances 150 W at 4 ohms. And 120 W at 6 ohms.
Q: Are there any limitations to input sensitivity of the equalizer amplifier section?
A: There are no limitations, since the output of the equalizer amplifier is at 150 mV which is fairly high sensitivity.
Q: What about the AC outlets of the PMA-700V?
A: It has two switched and one unswitched AC outlet.
Q: Specify the dimensions for the PMA-700V?
A: Without taking out the rubber feet and control knobs, the dimensions are 434 x 157 x 397 mm.
Q: Indicate the weight for PMA-700V?
A: The power amplifier weighs 10.5 kg which is equal to 23 lbs 2 oz.
User Manual
Loading...