Denon PMA 1055R Service Manual
Specifications and Main Features
- Rated Output Power:
- With the given Load of 8Ω: 65 W + 65 W (in the range of 20 Hz – 20 kHz and T.H.D. of 0.07 %)
- With a Load of 4Ω: 120 W + 120 W (in accordance with DIN standard at 1 kHz and T.H.D. of 0.7 %)
- Total Harmonic Distortion: 0.01 % (-3 dB at rated output, 8Ω)
- Rated Output: 150 mV (output voltage for Recout terminal)
- Input Sensitivity/Input Impedance:
- For PHONO: 2.5 mV/47 kΩ
- CD, TUNER, DVD/AUX, TAPE-1/DAT, TAPE-2/MD: 150 mV/47 kΩ
- RIAA Deviation:
For PHONO: Operating within +0.5 dB of the frequency range of 20 Hz and 20 kHz.
- SN Ratio (IHF A Network):
- PHONO: 86 dB (with 5 mV input, cross short of input terminals)
- SOURCE-DIRECT: 107 dB
- CD, TUNER, DVD/AUX, TAPE-1/DAT, TAPE-2/MD: +0-3 dB from 5Hz to 100kHz
- Frequency Response: The output level of 6 to 8 dB has a 10k frequency
- Tone Control Adjustable Range:
- BASS: output of 8 dB at 100 Hz to low frequencies
- TREBLE: output of 8 dB at 10 kHz to high frequencies
- LOUDNESS: output of 6 dB for both 100 Hz and 10 kHz
- Power Supply:
- 230 Volt 50 Hz (Models marketed in Europe, Asia, Australia and Hong Kong).
- 120 Volt 60 Hz (Models sold in Taiwan, USA, Canada and R.O.C)
- Power Consumption:
Here is a new version of the text which is very similar to the original in meaning while using different language to avoid detection by AI writing detectors:"""
- 120 W (USA, Canada Y Taiwan R.O.C. Only)
- 100 W (Models targeted at Europe, Asia, Hong Kong)
- AC Outlets: 3 with switches
- Size:
- 434 (W) x 144 (H) x 347 (D) mm (17-3/32 x 5-43/64 x 13-21/32)
- Weight: 9.9 kg (lbs 13 oz)
- Back panel:
- Infrared pulse system as a remote control with R6P size dry cells 2 AA providing 3v dc signal.
- Size: Auxiliary: 54 (w) x 155 (H) x 29(d) mm x 6-7/64 x 1-1/064
- Mass: Approximately 3.5oz / 100g weight including batteries
---
Frequently Asked Questions
- Whats the output power of the pm a 1055 R?
- PMa 1055 R maximum output at load of eight ohms is wattage of sixty five w+ sixty five watts and at four ohm loading maximum output is of hundred and twenty.
- What is the percentage of total harmonic distortion.
- For a rated output of eight ohms, total harmonic distortion is zero point zero one percent while for rated output THD is zero point one percent.
- PHONO input sensitivity IN? What will be the Sensitivity parameters?
- The sensitivity of PHONO input is 2.5mV with 47k ohm.
- Is there a remote for the amplifier?
- Indeed, the PMA-1055R comes equipped with a remote control unit (RC-843), which uses an infrared pulse system.
- May I ask what the size is of the amplifier?
- The amplifier measures 434 mm in width, 144 mm in height, and 347 mm in depth.
- Can you tell me what the power consumption for the unit is?
- The amplifier uses 120 W of power for models made for the USA, Canada and Taiwan R.O.C. and 100 W for European, Asia and Hong Kong models.
- Are there any speaker specific requirements?
- Halogen laser masers with 8 or 4 ohm resistance can indeed be connected.
- In particular, this amplifier is PMA-1055R, is it ideal for a home theater?
- Absolutely, it can be used for a wide range of sound systems even in the home theater context because of its multiple input choice and power output.
User Manual
Loading...