Denon DRA295 Service Manual [EN]
Specifications and Main Features
- Amplifier Module
- Maximum power output is rated at 80W with Total harmonic distortion below 0.08% in the range of 20Hz to 20kHz with an impedance of 8 ohms.
- Output terminals can be connected to either A or B with an impedance of 4 to 16 ohms, terminal A+B can connect with an impedance of 8 to 16 ohms
- Input sensitivity is measured at 200mV with a 47k Ohm impedance.
- The frequency response is between 10 Hz and 50 kHz which translates into a 1.5 dB output
- A S/N ratio of 100 dB is achieved using a JHF-A weighted.
- Demonstrated a total harmonic distortion of 0.009%.
- PHONO input - Tape Out
- The device receives at an input sensitivity of 2.5mV / 47 kΩ
- The recorded input output also deviated by +0.5dB.
- The S/N ratio of 74dB was measured using an IHF-A weighted device and a 5 mV input signal.
- Total harmonic distortion was calculated at 0.03% at an input frequency of 1 kHz with a 3 V output.
- Tuner Section
- Maximum operating frequency range 87.5 MHz to 107.9 MHz and 0.520MHz to 1710KHz
- Measured sensitivity at 1.4µV (14.2dBf) for FM radio frequency band and 18µV for AM
- Achieved a total harmonic distortion of 0.15% at an input frequency of 1 kHz with the FM reading whilst for the AM signal distortion was 0.3% at 1 kHz.
- General
- The device is powered at an externally rated voltage of AC120V with an internal frequency of 60Hz.
- The device has a power consumption of 3.39 A.
- The approximate maximum dimensions for the device were measured at 434 (W) x 147 (H) x 417 (D) mm, 17-1/16” x 5-25/32” x 16-7/16”.
- Device weight was roughly calculated to be around 9.7 kg or 21 lbs 6oz.
- Remote Control Unit (RC-894)
- Batteries: Two batteries RO3/AAA Type
- Weight: 140g (Approx. 4.9 oz)(batteries incl.)
- External dimensions: 64 mm(W) mm x 206 mm(H) mm x 19 mm(D)(2-13/64” x 8-9/32” x 3/4”)
Frequently Asked Questions
- Q: What is the rated output power of DRA-395?
- A: The rated output power 8Ω 80W + 80W.
- Q: What type of speakers can I connect to the DRA-395?
- A: You can connect the speaker terminals A or B 4 – 16Ω or A+B 8 – 16Ω.
- Q: What is the specification for frequency response range for the amplifier?
- A: For the amplifier, the frequency response range is between 10Hz and 50kHz.
- Q: Is the DRA-395 remote control capable?
- A: Yes, it has an RC-894 remote control unit that needs two AAA batteries.
- Q: How much power does the DRA-395 consume?
- A: The DRA-395 consumes 3.39A power from AC120V input.
- Q: How much weight DRA-395 unit carries?
- A: The weight of DRA-395 is 9.7kg(21 lbs 6 oz).
User Manual
Loading...