Denon DCD-720 User Manual
Operations
Information
Preparations
CD
DCD-720AE / DCD-520AE
COMPACT DISC PLAYER
Owner’s Manual
Preparations
Operations
Information
CD
SAFETY PRECAUTIONS
n
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
,,
CLASS 1
LASER
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING: OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
ATTENZIONE: QUESTO APPARECCHIO E’ DOTATO DI
DISPOSITIVO OTTICO CON RAGGIO LASER.
L’USO IMPROPRIO DELL’APPARECCHIO PUO’ CAUSARE
PERICOLOSE ESPOSIZIONI A RADIAZIONI!
PRODUCT
,
,
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14. Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug
from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to the unit
and must be within easy access by the user.
•DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this
declaration relates, is in conformity with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of Low Voltage Directive 2006/95/EC and EMC
Directive 2004/108/EC, the EC regulation 1275/2008 and its frame work
Directive 2009/125/EC for Energy-related Products (ErP).
DENON EUROPE
Division of D&M Germany GmbH
An der Kleinbahn 18, Nettetal,
D-41334 Germany
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with the local recycling regulations.
When discarding the unit, comply with local rules or
regulations.
Batteries should never be thrown away or incinerated
but disposed of in accordance with the local regulations
concerning battery disposal.
This product and the supplied accessories, excluding the
batteries, constitute the applicable product according to the
WEEE directive.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
I
NOTES ON USE
Preparations
Operations
Information
CD
n
n CAUTIONS ON INSTALLATION
WARNINGS
•Avoid high temperatures.
Allow for sufficient heat dispersion when installed in a rack.
•Handle the power cord carefully.
Hold the plug when unplugging the cord.
•Keep the unit free from moisture, water, and dust.
•Unplug the power cord when not using the unit for long periods of time.
•Do not obstruct the ventilation holes.
•Do not let foreign objects into the unit.
•Do not let insecticides, benzene, and thinner come in contact with the unit.
•Never disassemble or modify the unit in any way.
•Ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, tablecloths or curtains.
•Naked flame sources such as lighted candles should not be placed on
the unit.
•Observe and follow local regulations regarding battery disposal.
•Do not expose the unit to dripping or splashing fluids.
•Do not place objects filled with liquids, such as vases, on the unit.
•Do not handle the mains cord with wet hands.
•When the switch is in the OFF (STANDBY) position, the equipment is not
completely switched off from MAINS.
•The equipment shall be installed near the power supply so that the power
supply is easily accessible.
•Do not keep the battery in a place exposed to direct sunlight or in places
with extremely high temperatures, such as near a heater.
z
z z
z
Wall
z For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
•More than 0.1 m is recommended.
•Do not place any other equipment on this unit.
II
Getting started
Preparations
Operations
Information
CD
Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading them, be sure to keep them for future reference.
Contents
Getting started ·············································································· 1
Accessories ··················································································1
Features ························································································ 2
Cautions on handling ····································································2
Preparations ·············································································3
Connections ··················································································· 4
Cables used for connections ························································4
Connecting a 2-channel audio amplifier ········································ 4
Connecting to a digital recording device ······································· 4
Connecting an iPod or USB memory device to the iPod/USB port
(DCD-720AE only) ········································································· 5
Connecting the power cord ·························································· 6
Setting the Auto Standby mode··················································6
Operations ················································································7
Playback ························································································· 8
Turning the power on ···································································8
Playing CD ····················································································8
Playback of MP3 and WMA files ·················································· 9
Playback iPod® ·········································································· 10
Playing a USB memory device ···················································11
Operations enabled during playback ··········································· 12
Using the timer play function ······················································14
Information ·············································································15
Part names and functions···························································16
Front panel ·················································································· 16
Display ························································································ 17
Rear panel ··················································································· 17
Remote control unit ···································································· 18
Other information ·······································································21
Playable media ············································································ 21
Cautions on using media ····························································23
Explanation of terms ··································································· 24
Troubleshooting ·········································································· 25
Specifications ··············································································26
Accessories
Check that the following parts are supplied with the product.
q Getting Started ........................................................................ 1
w CD-ROM (Owner’s manual) .................................................... 1
e Safety Instructions .................................................................. 1
r Service network list ................................................................. 1
t Remote control unit (RC-1173) ................................................ 1
y R03/AAA batteries ................................................................... 2
u Audio cable .............................................................................. 1
ut
1
Features
Preparations
Operations
Information
CD
Cautions on handling
AL32 Processing (DCD-720AE only)
Equipped with AL32 Processing, DENON’s own analog waveform
reproduction technology.
The reproducibility of weak signals is enhanced by expanding 16 bit
digital data to 32 bit.
High precision 32 bit / 192 kHz D/A converter
Equipped with high-precision 32 bit / 192 kHz-compatible D/A
converter for analog signal conversion of the digital data (in the
case of DCD-720AE, expanded with AL32 processing).
USB and iPod Direct playback
A USB port is mounted on the Front Panel. MP3/WMA files can be
played by connecting a USB Player or USB memory device.
An iPod is connected using the USB cable supplied with the
iPod. Music files in an iPod, USB Player or USB memory device
are transmitted via digital signal and can be enjoyed at high audio
quality using the this unit’s own audio circuitry.
Large 16-character / 2-line display
Text information appears on the large display during MP3 or iPod
playback.
Reduced power consumption during standby
In consideration of the environment, power consumption during
standby has been reduced to 0.3 W or better.
•Before turning the power on
Check once again that all connections are correct and that there are
no problems with the connection cables.
•Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
•Proper ventilation
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving the signals properly.
•About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from this unit when it is in use.
•Moving the unit
Turn off the power and unplug the power cord from the power
outlet. Next, disconnect the connection cables to other system units
before moving the unit.
•About care
•Wipe the cabinet and control panel clean with a soft cloth.
•Follow the instructions when using a chemical cleaner.
•Benzene, paint thinner or other organic solvents as well as
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.
2
Preparations
PreparationsPreparations
Operations
Information
CD
Preparations
Here, we explain the connections and setup methods for this unit.
F Connections vpage4
F Setting the Auto Standby mode vpage6
3
Connections
PreparationsPreparations
Operations
Information
CD
Connections for all compatible audio signal formats are described
in this owner’s manual. Please select the type of connections
corresponding to the equipment you are connecting.
NOTE
•Do not plug in the power cord until all connections have been
completed.
•When making connections, also refer to the owner’s manual of the
other components.
•Be sure to connect the left and right channels properly (left with left,
right with right).
•Do not bundle power cords together with connection cables. Doing
so can result in humming or noise.
Cables used for connections
Select the cables according to the equipment being connected.
Audio cable (supplied)
Audio cable
Optical cable
USB cable
(Provided with
iPod)
L
R
Audio cable (sold separately)
Cable (sold separately)
L
R
Connecting a 2-channel audio
amplifier
This connection is for playback of audio of this unit, using a 2-channel
audio device.
Amplifier
AUDIO
AUDIO
IN
RL
R
L
L
R
Connecting to a digital recording device
This connection is for recording audio from this unit, using an audio
device with optical digital audio input connectors.
CD recorder /
MD recorder
AUDIO
OPTICAL
IN
n When connecting the optical digital output
connector with an optical transmission cable
(sold separately)
Match the shapes
Match the shapes then insert firmly.
4
Connecting an iPod or USB memory device to the iPod/USB port (DCD-720AE only)
PreparationsPreparations
Operations
Information
CD
•You can enjoy music stored on an iPod or USB memory device.
•For operating instructions see “Playback iPod®” (vpage 10) or “Playing a USB memory device”
(vpage11).
Cables used for connections
To connect an iPod to this unit, use the USB cable supplied with the iPod.
iPod
USB memory
device
Supported iPod models
•iPod classic
or
DENON does not guarantee that all USB memory devices will operate or receive power. When using a
portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power,
use the AC adapter.
NOTE
•USB memory devices will not work via a USB hub.
•It is not possible to use this unit by connecting the unit’s iPod/USB port to a PC via a USB cable.
•Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.
•When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone
is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this
device.
•If the iPod is connected using an iPod cable (commercially available) that is longer than 2 m, sound may
not be played correctly. In this case, use a genuine iPod cable, or a cable that is shorter than 1 m.
•iPod nano
•iPod touch
•iPhone
(as of May 2012)
5
Connecting the power cord
PreparationsPreparations
Operations
Information
CD
After completing all the connections, insert the power plug into the
power outlet.
To household power outlet
(AC 230 V, 50/60 Hz)
Power cord
NOTE
•Do not plug in the power cord until all connections have been
completed.
•Insert the plugs securely. Loose connections will result in the
generation of noise.
•Do not unplug the power cord while the unit is operating.
Setting the Auto Standby mode
With the Auto Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
•The default setting is “On”.
Press and hold POWER X for at least
5 seconds.
•Auto Standby mode is switched between
Off and On.
•The power indicator indicates Auto Standby
mode Off/On during Standby, as shown
below :
Auto Standby mode “Off”
“Lit in red”
•The power indicator flashes in red during Auto Standby mode
setting.
•If you set the Auto Standby mode while the unit is ON, the unit will
enter the standby mode as soon as the Auto Standby mode setting
is completed.
•When iPod is being charged, this unit enters the power standby
mode after charging.
NOTE
If an iPod is connected with this unit in the remote mode,this unit will
not enter the standby mode, even after about 30 continuous minutes
of stop mode with no operation.
Auto Standby mode “On”
“Unlit”
6
Operations
Operations
Information
Operations
Preparations
CD
Operations
Here, we explain functions and operations that let you make better use of this unit.
F Playback vpage8
7
Loading...