Denon AVR-900 Service Manual
Specifications and Main Features
- Model: AVR-S00
- Output Power (FRONT 8 ohm): 60W + 60W (20 Hz - 20 kHz, 0.08% THD)
- Output Power (CENTER 8 ohm): 60W (20 Hz - 20 kHz, 0.08% THD)
- Output Power (REAR 8 ohm): 15W + 18W (1 kHz, 0.3% THD)
- Input Sensitivity:
- Line Input: 150 mV/47 k ohm
- PHONO: 2.5 mV/47 k ohm
- Frequency Response: 10 HZ TO50 KHz (+3 dB)
- Tone Control Range
- Bass: +10 dB 100 Hz
- Treble: +10 dB 10 kHz
- Signal-to-noise Ratio: 92 dB (stereo)
- RIAA Deviation: +1 dB (20 Hz to 20 KHz)
- Usable Sensitivity (FM): 1.0 uV (11.2 dBf)
- Frequency Range (FM): 87.5-107.9 MHz (North America)
- Weight: 7.7 kg (17 lbs)
- Dimensions: 434mm Width, 142 mm Height, 303 mm Depth
- Remote Control Unit Model: RC-195
- Total Remote Control Buttons: 28
- Power Supply: AC 120 V, 60 Hz (North America); 230 V, 50 Hz (Asia)
- Power Consumption
- 4.0 A (North America)
- 200 W (Asia)
Frequently Asked Questions
- Q: What are the specifications for the rated output power for the AVR-S00?
A: The hardware has the capacity to generate an output of 60W + 60W (8 ohms) for the front channels.
- Q: Is there a restriction to the impedance of the speakers that I connect to the AVR-S00?
A: A 4-ohm speaker can be connected as well, however the device should be used with the said impedance for better results.
- Q: Which remote control is designed for use with the AVR-S00?
A: The supported remote control for the AVR-S00 model is the RC-195.
- Q: Which period is covered in the warranty for the AVR-S00?
A: Warranty period may differ, check your device for manufacturers warranty paper to learn more.
- Q: What do I do when the device stops lighting up?
A: Look over the power cord, make sure the power outlet is working correctly while also confirming if the power switch was engaged, if the problem still persists then go through the service manual or reach out for support.
User Manual
Loading...