DELTA DORE TYBOX 1010 WT User Manual

TYBOX 1010 WT

www.deltadore.com

User guide

Contents

1- AUTO mode

1- AUTO mode ................................................................................ 3

2- Technical unit indicator lights ......................................................3

3- Home automation functions ........................................................ 4

4- Date and time settings ................................................................ 4

5- Setting the temperature settings ................................................5

6- Consumption data display .......................................................... 7

7- Programming .............................................................................. 8

8- ‘i’ information button ................................................................ 10

9- Days home ............................................................................... 11

10- Absence .................................................................................11

11- Heating override ..................................................................... 12

12- DHW override ......................................................................... 12

13- AUTO mode ............................................................................ 13

14- Help ........................................................................................ 14

- 2 - - 3 -

TYBOX controls the heating depending on the active programme (P1 to P6)
and required temperature (settings).

Control output
start

Information
button

Override

/ )

(

Day of the
week

Time

Temperature
measured

Profile of active
programme

Consumption
data display

Hot water tank
override

• Heating and DHW (Domestic Hot Water) overrides possible,

• Access to consumption data (

),

- Access to the system status ('i' button) and to any faults,

• Changeover to standby after a 30 seconds time-out period

2- Technical unit indicator lights

Bus indicator light

Blinks in sync with the data
Steady blinking = Bus fault
Off = Power supply failure

Electronic meter indicator light

On = Normal operation
Blinking = remote-info fault

DHW load control indicator light

On = Load control in progress

DHW (Domestic Hot Water) indicator
light

On = ON
Off = OFF

"Control output" indicator light

On = ON
Off = OFF

TYBOX

Ref. : 4100795

4VA

230V~50Hz

246810

1

3 5 7 9

T

BUS A

C

Ti1 Ti2 Ti3

BUS

N

L

11

12

3A - 230V

16 17 19 2018

T
C

~

3- Home automation functions

5- Setting the temperature settings

The home automation functions control the following functions either locally
or remotely via a tablet or a smartphone:

- heating control (heat/cool mode, Auto/Off/Absence/override mode),

- display of the consumption data over the current month and the history of
previous months (electricity, gas, etc.).
To get this service, you have to associate the room unit with the TYDOM
home automation gateway.

Example with the TYDOM 2000 home automation gateway

Smartphone

TYDOM 1000

Volets

Eclairages

Chauffage

1

Alarme

Garage

Portail

Autres

Scénarios

Pièces

ADSL BOX

TYDOM 2000

Wireless

OR

Tablet

TYDOM 2000

Volets

Scénarios

1

Eclairages

Chauffage

Alarme

Garage

Portail

Autres

Pièces

Wi (local)

or

Internet (remote)

Ethernet cable

4- Date and time settings

These settings are only available if the control output is used and declared
(configuration menu 2-08 > 0, installation instructions).
The Heat/Cool option will only be available if the presence of a cooling
system has been declared (installer menu, 0-06).
Press '+' or '-'. Confirm with OK.

2

3

5 30°C

1

4

6

5

5 16°C

7

EXIT5 30°C

Turn the selector
knob
to exit the mode

2 4 5

3

JJ/MM/AA HH/MM

1

Enter the date, then the time.
Confirm with OK.

Return to
the previous
setting

EXIT

Turn the
selector
knob to exit
the mode

- 4 - - 5 -

6- Consumption data display

From the AUTO,

Press
.

or modes.

Gas

Elec.

Cooling

Heating

DHW

Others

Plugs

: Total gas consumption

: Total electric consumption

: Cooling consumption

: Heater consumption

: Domestic Hot Water consumption (DHW)

: Consumption of devices connected to the mains

- To change over to a different consumption, turn the selector knob.

- Depending on the system's configuration, some symbols will not be avail­able.

- To exit the "Consumption data display" mode, press .

• If you own a "hybrid" boiler, the heating and DHW consumption data will
be displayed for each type of energy used (gas and electricity).

• The consumption indices and the history can be reset (menu 2-24,
installation instructions).

Example: To view the total electric consumption of your system
turn the selector knob to select the

History: Press '+' to display the overall consump­tion history from the beginning of the current year,
then for the previous year

Displays the con­sumption for the
current month

History:
Press '-' to display the
consumption history for the 12 previous months

symbol.

- 6 - - 7 -

7- Programming

This menu enables the following functions:

- assigning a daily programme P1 to P6 for each day of the week, and appli­cable in AUTO mode,

- modifications to programme P6 (P1 to P5 are not editable),

- modifications to programme P0 (Days home) applicable in

• Programme P6 can be viewed. Press >> to scroll the programme steps.
Modifications to programme P6 are applied to all the days when the
programme is assigned.

2

1

+

OU

OK

2

mode.

Non editable P1 to P5

Editable P0

6h 24h0h 21h

6h

P1

P2

6h 8h

6h 8h

13h11h 23h17h

P3

P4

P5

You have to set the start (Start) and
(Stop) time for the Comfort period (e.g.
6am to 9pm).

24h0h 23h

24h0h

23h17h

24h0h

24h0h

24h0h

Day 1

Day 2

3

OK

Select the programme to be applied on day 1.

Select with '+' and '-'. Confirm with OK.

Editable P6

OK OK OK

7h 9h 0h0h 23h18h

Example: Comfort mode from 7 to 9am and 6

EXIT

to 11pm

4

OK

5

OK

6

+ +

Select the programme to be applied on day 2.

+ +

OK

Press the following buttons as many times as necessary:

-

to create the economy periods

to create the comfort periods.

-

OK

Repeat the
procedure for the
other zone, where
necessary.

- 8 - - 9 -

8- 'i' information button

4

9- Days home

From the AUTO, or modes, you can view the system status
('i' button) and any faults (refer to the "Help" section).

Operating hours
meter (boiler).

h (ON)

023

Temperature
setting

Time to
boiler
maintenance

• The operating hours meter is only active if the menu 2-08 (refer to instal­lation instructions) is not 0 or PROG.

• The operating hours meter can be reset (menu 2-17).

• The period before maintenance must be initialised after each mainte­nance operation (menu 2-20).

10- Absence

6h 24h0h 21h

This menu monitors programme
P0 (refer to the "Programming"
section).

• Heating and DHW overrides
possible.

• Access to consumptions

• Switch to stand-by after a 30
seconds time-out period

Example: You are away from Friday 10/02 to Saturday 18/02.
The heating is on 'Frost Protection' mode over this period.
The DHW system is off (modifiable, installer menu 1-05).

JJ/MM/AA

Set the Frost Protection
temperature (except for
Cool mode).

Turn the selector knob to
then enter the date of return
with '+' and '-'.
Confirm with OK.

18/02 00:00

Automatic return
to AUTO mode on
Saturday 18/02 at
00:00h.

- 10 - - 11 -

11- Heating override

4

6h 8h

From the AUTO mode.

17h15h30 23h

When you apply a 'Stop' or 'Frost Protection' override from a tablet or
smartphone, the and symbols are not displayed on the room unit.

E.g. it is 3.30pm and you want to run the

0h0h

Comfort mode before the set time (5pm)
on zone 1.

At 5pm, the programme will resume its
normal cycle.

13- Stop mode

In this mode:

- the heating is off.

- the DHW override is possible

- the consumption data is displayed (button

- the system status ('i' button)
and any faults (refer to the "Help" section) are displayed.

).

Boiler
operating hours meter

hON

023

12- DHW override

From the AUTO, or modes.

Press .

Press the 'i' button several times,
to view the system's status

The

symbol blinks.
The DHW is restarted
for 6 hours.

Restart may be suspended when
changing to Off-Peak times or by
pressing

again.

- 12 - - 13 -

Number of days to
maintenance

14- Help

Nothing is displayed on the room unit screen.

There is no power supply.

Check the circuit breaker.

You cannot set the Frost Protection temperature in absence mode.

Cool mode is active.

The Frost Protection mode settings are not available in this mode.

The

symbol does not appear.

The DHW is not managed by the device.

Refer to menu 1-04, installation instructions.

The

Boiler maintenance is due in less than 30 days.
OR
A system fault has been identified.

From the AUTO,
"Fault".

dEF 6:

There is a communication fault between TYBOX and the technical unit (Bus
A).

Check the system.

dEF 7:

There is a communication fault with the electronic meter.

Check the connection with the meter.

symbol blinks.

or , modes press the 'i' button to display the type of

- 14 - - 15 -

2004/108/EC - 2006/95/EC

EN