
16
Please read this instruction
booklet carefully before
installing and using the
appliance. In this way, you will
obtain the best possible results
and maximum operating safety.
In particular, refer to the safety
warnings on page 24.
INTRODUCTION
The new PAC 35 consists of two units: the internal
unit is designed to operate inside the room to be
conditioned; the external unit is installed in the
open.
The two units are connected by a special hose,
approximately 3,5 metres in length. This hose
contains the freon tubes, the electrical wiring and
the condensation discharge tube.
TECHNICAL DATA
For this equipment’s technical features, read the
plate listing those features.
Tube length 3500 mm
Tube size 20 x 44 mm
Dimensions (internal unit):
• width 560 mm
• height 735 mm
• depth 355 mm
• weight 44 kg
Dimensions (external unit):
• width 450 mm
• height 470 mm
• depth 210 mm
• weight 14 kg
CONDIZIONI STANDARD DI
FUNZIONAMENTO:
Temperatura interna 27°C
47% umidità relativa
Temperatura esterna 35°C
41% umidità relativa
IDEAL OPERATING CONDITIONS
Room temperature 21 ÷ 32°C
External temperature 21 ÷ 43°C

DESCRIPTION
INTERNAL UNIT
Condensation discharge tube
Castors
Power cable
Rear panel
Carrying handle
Removable filter
Power cable space
Air intake grille
Air outlet grid
Control panel
EXTERNAL UNIT
Tiemr cover
(to adjust the timer, slide cover
sideways)
INTERNAL UNIT
Connection hose

18
ACCESSORIES
ILLUSTRATION NUMBER SUPPLIED
2
4
4
2
1
2
1
4
DESCRIPTION
Wall bracket
Screws + wall plugs (Ø 6mm)
Nut and bolt (Ø 5mm)
Support belt with hook
Frame for connector hose
Castor stop
Condensation drainage coupling
Castors for external unit and washers
This appliance is fitted with a special HE (High
Efficiency) system for extra-low energy
consumption. When the unit is switched on,
this system requires about 4 minutes before
cold air is generated.