Thank you for choosing this bean to cup espresso and cappuccino machine.
Take a few minutes to read this Instruction for Use. This will
avoid all risks and damage to the appliance.
1.1 Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on pages 2-3.
1.2 Troubleshooting and repairs
In the event of problems, rst try and resolve them by reading
the information given in sections “22. Displayed messages” and
“23. Troubleshooting”.
If this does not resolve the problem or you require further information, you should consult Customer Services by calling the
number given on the annexed "Customer Service" sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee. If repairs are required, contact
De’Longhi Customer Services only. The addresses are given in
the guarantee certicate provided with the machine.
1.3 Download the App!
A number of functions can be controlled remotely using the
De’Longhi Coee Link App.
In the App, you can also nd information, tips and curious facts
about the world of coee, together with information on your
machine at your ngertips.
This symbol highlights the functions you can control or
consult using the App.
You can also create up to 6 new beverages and save them in your
appliance.
Please note!
Check compatible devices on "compatibledevices.delonghi.
com".
A5. Beans container lid (I)
A6. Beans container (II)
A7. Beans container lid (II)
A8. button: to turn the appliance on and o (standby)
A9. Cup shelf
A10. Connection nozzles access door
A11. Connection nozzles
A12. Main switch (ON/OFF)
A13. Power cord connector socket
A14. Swivelling control panel
A15. Front door release button
A16. Front door
A17. Coee spouts (adjustable height)
A18. Coee grounds container
A19. Cup tray
A20. Drip tray water level indicator
A21. Drip tray grille
A22. Drip tray
A23. Water tank rell door
A24. Water tank lid
A25. Water tank
A26. Infuser door
A27. Removable infuser
2.2 Description of the homepage (main screen)
(page 2 - B)
B1. Display
B2. Customisable proles (see “16. SELECTING YOUR PERSONAL
PROFILE”)
B3. Scroll arrow
B4. To display and customise the beverage settings
B5. Directly selectable beverages
B6. Appliance settings menu
B7. Descaling required light
B8. Milk container cleaning required
B9. Filter exhausted light
B10. No coee beans light
2.3 Description of the accessories (page 2 - C )
C1. "Total Hardness Test" indicator paper (attached to page 2
of the English instructions)
C2. Pre-ground coee measure (in the compartment (A2))
C3. Descaler
C4. Water softener lter
C5. Cleaning brush
C6. Power cord
C7. Ice cube tray (2 pieces)
C8. Tube brush
C9. Cloth
7
2.4 Description of the milk container
(page 2 - D )
D1. Milk container lid
D2. Milk container connector (removable for cleaning)
D3. Milk rell lid
D4. Milk container lid release button
D5. Milk intake tube
D6. Milk spout (adjustable height)
D7. Milk container
D8. Thermal casing
(page 2 - F )
F1. Spout body
F2. Spout connector (removable for cleaning)
F3. Spout release button
F4. Hot water/steam connection nozzle
F5. Cappuccino maker
3. SETTING UP THE APPLIANCE
Please note!
• Coee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coee in the mill. The machine is, however, guaranteed to
be new.
• You should customise water hardness as soon as possible
following the instructions in section “19. Setting water
hardness”.
• The control panel (B) can be swivelled to make sure the
homepage is always visible.
1. Plug the power cord connector (C6) into the socket (A13) at
the back of the appliance and connect the appliance to the
mains electricity supply (g. 1). Make sure the main switch
(A12) at the back of the appliance is pressed (g. 2);
2. "SELECT LANGUAGE": Press the ag corresponding to the
desired language.
Then follow the instructions which appear on the appliance
display (B1):
3. "FILL TANK WITH FRESH WATER. USE BUTTON ON THE RIGHT
TO OPEN THE FRONT DOOR":
• Press the button (A15) and open the door (A16) (g. 3);
• Remove the water tank (A25) (g. 4) and ll to the MAX
line (marked on the inside of the tank) with fresh water
(g. 5);
• Then put the tank back (g. 6) and close the door;
• Check that the hot water/steam spout (F) is inserted on
the connection nozzles(A11) (g. 7) and place a container holding a minimum of 100 ml underneath (g.
8);
• Press "Next".
4. "FILL BEANS CONTAINERS AND PRESS Next": ll beans container (I) (A4) and, if you want to also use another quality
of coee, beans container (II) (A6) (g. 12), then conrm
by pressing "Next".
5. "WATER CIRCUIT EMPTY. PRESS OK TO START FILLING": conrm by pressing "OK";
6. "MACHINE SETUP UNDERWAY. AFTER IT GOES OFF TURN ON
AGAIN": the appliance delivers water from the spout (g.
9);
7. The appliance goes o.
The coee machine is now ready for normal use. Turn on following the instructions in section “4. Turning the machine on”.
Please note!
• The rst time you use the appliance, you need to make
4-5 cappuccinos before the results in the cup will be
satisfactory.
• The rst time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit lls.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
4. TURNING THE MACHINE ON
Please note!
• Before turning the appliance on, make sure the main
switch (A12) is pressed (g. 2).
• Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
1. To turn the appliance on, press the button (A8) (g.
10). The message "HEATING UP UNDERWAY" appears on
the display (B1);
2. When at temperature, the appliance performs a rinse cycle
delivering hot water from the coee spouts (A17) and
the message "RINSING UNDERWAY, HOT WATER FROM
8
SPOUTS" is displayed. As well as heating the boiler, this
also heats the internal circuits by circulating hot water.
Please note! Using for the rst time:
3. "GET READY TO EXPERIENCE YOUR NEW ESPRESSO MACHINE. ENJOY THE VIDEO!": press "OK" to watch a short
video on the homepage;
4. "MACHINE READY. ENJOY YOUR COFFEE!": Press "OK" to
go to the homepage (main screen) (or press "Repeat" to
watch the video again).
The appliance is at temperature when the main "CHOOSE YOUR
FAVOURITE" screen appears.
5. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
1. To turn the appliance o, press the button (A8) (g.
10).
2.
"TURNING OFF UNDERWAY": if envisaged, the appliance
performs a rinse cycle, delivering hot water from the coee
spouts (A17), then goes o (stand-by).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
1. First turn the appliance o by pressing the button
(g. 10);
2. Release the main switch (A12) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
6. MENU SETTINGS
6.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A17) and hot water/steam spout (F), if inserted, to clean and
heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the settings menu (B6);
2. Select "Rinsing";
3. "Position 0.5l container under spouts. Press OK to start".
Press OK to start delivery. After a few seconds, hot water is
delivered rst from the coee spouts, then the hot water/
steam spout (if inserted) to clean and heat the internal
circuit of the appliance (g. 11). "Rinsing underway. Hot
water from spouts" appears on the display (B1);
4. To stop rinsing, press "Cancel" or wait for rinsing to stop
automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2-3 rinses before use;
• After cleaning, it is normal for the grounds container (A18)
to contain water.
6.2 Descaling
For instructions on descaling, see section “18. Descaling”.
6.3 Clean milk container
This function can be used to clean the milk container (D) before
putting it in the refrigerator. To clean, proceed as follows:
1. Attach the milk container to the connection nozzles (A11)
and push as far as it will go (g. 22). The machine emits a
beep (if the beep function is enabled);
2. Adjust the milk spout (D6) by turning it anticlockwise (g.
23);
3. Place a recipient under the milk spout (g. 26);
4. Press the settings menu;
5. Select "Clean milk container";
6. "Place recipient under milk spout. Press OK to start milk
container cleaning";
7. Press "OK" to start cleaning: "CLEANING MILK CONTAINER
UNDERWAY. PLACE A RECIPIENT UNDER MILK SPOUT" (g.
26): hot water is delivered from the milk spout and stops
automatically when cleaning is complete.
8. Before extracting the milk container, place the milk spout
in the not-in-use position by turning it clockwise.
Please note!
• Never extract the milk container by pulling the milk spout.
• To interrupt the cleaning cycle at any moment, press
"Stop";
• In some cases, to clean you must wait for the appliance to
heat up;
• The milk container can be kept in the refrigerator.
6.4 Adjust mill
The appliance has two coee mills corresponding to beans containers (I) (A4) and (II) (A6). The coee mills are set by default
to prepare coee correctly and should not require regulating
initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), they can be adjusted.
Proceed as follows:
1. Press the settings menu (B6);
2. Select "Adjust mill". A tutorial is displayed with suggestions
on the grinding level; if you want to skip this presentation,
press "Skip" or "Next" to continue with the tutorial;
3. "Select mill [I] or [II] and adjust coarseness within the
available range":
9
• Select the mill you want to adjust ( or );
• Follow the previous instructions in the tutorial to select the required grinding neness by pressing directly
on one of the selectable numbers in the highlighted
interval;
4. Press "OK": "The result in the cup will be perceived after
about 5 deliveries";
5. To implement the adjustment, press OK and deliver 5 coffee beverages using the mill selected at point 3.
6.
Please note!
• After carrying out the above procedure, we recommend
delivering at least 5 coees before adjusting again. If coffee delivery is still not correct, repeat the procedure.
• You cannot adjust more than one grinding level at a time
unless at least two coee-based beverages have been
made using the coee mill selected in point 3.
• To reset the mill to the default values (shown with a star),
press "Default" and deliver 5 coee beverages.
6.5 Water lter
For instructions on the lter (C6), see section “20. Water softener
lter”.
6.6 Water hardness
For instructions on setting water hardness, see section “19. Setting water hardness”.
6.7 General
1. Press the settings menu (B6);
2. Select "GENERAL";
Here you can enable or disable the following functions with a
simple touch:
-"Beep": when enabled, the appliance beeps whenever an
operation is performed.
-"Cup lighting": This function enables or disables the cup
lights under the coee spouts (A17).
-"Energy saving": use this function to enable or disable energy saving. When enabled, the function reduces energy
consumption in compliance with European regulations.
When enabled, the
settings menu (B6).
symbol appears on the icon in the
6.8 Auto-o
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the settings menu (B6);
2. Select "Auto-O";
3. Select the desired time interval (15 or 30 minutes, or 1, 2
or 3 hours).
4. Press "←" to save the new selection and go back to the
homepage.
6.9 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a mobile device. Proceed as follows:
1. Press the settings menu (B6);
2. Select "Bluetooth";
3. "Download the COFFEE LINK app. For greater security enable PIN protection and modify PIN from app": enable or
disable the PIN by pressing the cursor corresponding to
"PIN protection".
4. Press "←" to save the new selection and go back to the
homepage.
The preset PIN is "0000". You are recommended to customise the
PIN directly from the App.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identied unambiguously when an
association is created between the coee machine and the App.
6.10 Selecting the language
To modify the language of the display, proceed as follows:
1. Press the settings menu (B6);
2. Select "Select language";
3. Press the ag corresponding to the language you want
to set (press "Next" or "Back" to display all the languages
available). The display is immediately updated with the
selected language.
4. Press "←" to save the new selection and go back to the
homepage.
6.11 Emptying the circuit
To avoid the water in the circuit freezing if the appliance is to be
left idle for a long period of time, or before taking it to customer
services, we recommend emptying the water circuit.
Proceed as follows:
1. Press the settings menu (B6);
2. Select "Empty water circuit";
3. "Press OK to start water circuit emptying": press "OK";
4. "Empty grounds container and drip tray": after completing
the operation requested, press "Next";
5. "Position 0.5l container under spouts. Press OK to start":
after completing the operation requested, press "OK";
6. "Rinsing underway. Hot water from spouts": the appliance
performs a rinse cycle from the coee spouts (A17);
7. "Empty water tank": when the tank is completely empty,
press "Next";
8. "Remove water lter": when you have removed the lter,
press "Next";
10
9. "Insert water tank. Press OK to empty water circuit": put
the tank back in the appliance and press "OK";
10. Water circuit emptying underway": wait for the appliance to empty the circuit; (Important: hot water from the
spouts!). As the water circuit empties, the appliance could
become noisier. This is part of normal operation.
11. "Empty drip tray": extract and empty the drip tray, then
put back in the appliance and press "Next";
12. "Emptying complete. Press OK to turn o": press "OK". The
appliance goes o.
The next time the appliance is turned on, follow the instructions
in section “3. Setting up the appliance”.
6.12 Edit prole
You can use this function to modify the image and colour of the
icon for each prole. To customise the icon, proceed as follows:
1. Press the settings menu (B6);
2. Select "Edit prole";
3. "Select prole to edit": select the prole and press "Next";
4. "Select your favourite icon and colour. Use the COFFEE LINK
App to personalize prole name": customise the prole as
you want, then press "OK" to conrm.
5. Press "←" to save the new selection and go back to the
homepage.
6.13 Default values
This resets all menu settings and user customisation back to
the default values (with the exception of the language, which
remain as set, and the statistics).
Proceed as follows:
1. Press the settings menu (B6);
2. Select "Default values";
3. "Press OK to reset machine to default values or go to next
page to reset single prole":
• To reset the appliance to the default values: press "OK";
• To reset the individual proles to the default values:
press the arrow to pass to the next screen, select the
prole to reset and press "OK.
4. "Press OK to conrm reset to default values": press "OK";
5. "Default values set": press "OK" to exit the menu and go
back to the homepage (main screen).
Please note!
When the appliance (not the individual proles) has been reset
to the default values, the machine proposes the introductory
video again.
6.14 Statistics
This displays statistics relating to the machine. To view the statistics, proceed as follows:
1. Press the settings menu (B6);
2. Select "Statistics". To display the information and scroll between screens, press "Next" or "Back".
3. Press "←" to go back to the homepage.
7. MAKING COFFEE
7.1 Making coee using coee beans
Important!
Do not use green, caramelised or candied coee beans as they
could stick to the coee mill and make it unusable.
1. Fill beans containers (I) (A4) and/or (II) (A6) with coee
beans ( g. 12);
2. Place 1 or 2 cups under the coee spouts (A17);
3. Lower the spouts as near as possible to the cup (g. 13).
This makes a creamier coee.
4. Select the coee you want to make as described in the following paragraphs.
7.2 Your coee at a touch
To deliver coee-based beverages, press the image on the
homepage (B) corresponding to the desired coee (e.g. espresso, g. 14). The appliance proceeds with preparation. The image
of the selected beverage appears on the display (B1), together
with a progress bar which gradually lls as the operation proceeds and a description of each individual phase (grinding,
brewing coee).
At the end of preparation, the message "Your beverage is
ready!" appears on the display. The appliance is now ready to
be used again.
7.3 Customising the beverages
To make coee-based beverages with customised parameters,
proceed as follows:
1. Press at the bottom of the image corresponding to
the desired coee (e.g. espresso, g. 15). The parameters
that can be customised according to your tastes appear on
the display (B1):
"Quantity"
"Aroma"
"Coee type"
"Temperature"
Please note!
When "pre-ground coee" is selected, but the chosen beverage
is not suitable for this mode, the message "PRE-GROUND MODE
IS NOT ALLOWED WITH THIS BEVERAGE" is displayed.
11
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.