DeLonghi IC700 series, IC800 series User Manual
IC700 series
IC800 series
56394/1
UNFOLD
De'Longhi Australia Pty Limited
P.O.Box 597
Riverwood, NSW, 2208
AUSTRALIA
De'Longhi New Zealand Limited
P.O.Box 58-056
Greenmount, Auckland
NEW ZEALAND
before using for the first time
1Remove all packaging and any
stickers or labels.
2Wind excess cord around the base
of the steam station.
3Test the iron on an old cloth to make
sure the soleplate and water tank are
clean. We recommend that you
allow steam to disperse by pressing
the steam button in order to release
any residues that may have built up
during the manufacturing process.
●
Repeat step 3 after prolonged
periods of storage.
know your De’Longhi
steam station
lock for continuous steam
steam button
temperature control with
indicator light
soleplate
water tank cover
water tank
water tank guard rail
iron rest
cord cactus locations
power supply cord
cord storage
outlet for detachable iron
steam supply cord
boiler cap
variable steam control
low water indicator light
on/off button
ready to steam indicator light
outlet for Multicare accessory kit*
carry handle
cord cactus
detachable iron
PTFE soleplate not illustrated
(model IC800 series only)
* The Multicare accessory kit model
ICK01 and the PTFE soleplate model
ICSP01 are not included with model
IC700, but it may be able to be
purchased separately by contacting
the shop where you purchased the
steam station or by visiting
www.delonghi.com.au
using your steam station
1 Fit the detachable iron into it’s
socket: Lower the outlet cover, then
with the arrow on the connector
uppermost, push into the socket
until fully home. To remove, squeeze
the ribs on either side of the
connector and pull out . Never
remove the iron by pulling on the
cord.
2 Place the steam station on the
support of the ironing board or any
other stable surface nearby with the
iron sitting on the iron rest. Make sure
the steam station is unplugged and
that the power and steam supply
cords are unrolled and not kinked.
3 Fit the cord cactus into one of the
cord cactus locations. Place the
steam supply cord into one of the
grooves on the other end of the cord
cactus. This will keep the cord in an
upright position.
filling with water
Either
1 Lift off the water tank cover and fill
with water. Replace the cover.
Or
2Remove the tank by lifting off. Lift off
the cover, then fill the tank under the
tap. Re-fit the cover. Replace the
tank into its original position by
gently pushing into place.
●
Filtered water is best as it reduces
limescale, prolonging the life of your
steam station (water filters are widely
available). Alternatively use tap water.
●
If you need to refill your steam
station during use, we recommend
the empty water tank is removed for
filling. If filled whilst fitted, always
unplug the steam station first.
3
safety
When cleaning, never unscrew the
boiler cap whilst the unit is
pressurised. Steam will shoot out
and burn you. Always switch off,
unplug and leave overnight before
commencing to clean the boiler.
●
Don’t get burnt by the iron’s steam,
hot water, soleplate or iron rest.
●
Keep children away from the steam
station. And make sure they can’t
grab the cords and pull the steam
station down.
●
Trailing cords are a hazard, keep
them out of the way to prevent
accidents.
●
Never iron clothes being worn.
●
Never put the steam station, cord or
plug in liquid – you could get an
electric shock.
●
Always remove the water tank from
the steam station when filling from a
tap.
●
Don’t let the power and steam
supply cords touch hot parts.
●
Don’t let infirm people use the steam
station without supervision.
●
During ironing pauses and after use
always place the iron flat on the iron
rest of the steam station.
●
Never leave the steam station on
unattended.
●
Never use a damaged steam station.
Get it checked or repaired: see
‘service and customer care’.
●
Only use this appliance for its
intended domestic use.
●
Don’t let children play with the steam
station.
●
Don’t touch the appliance with wet
or damp hands.
●
Always switch off and unplug the
steam station before fitting or
removing the detachable iron.
●
Always unplug the steam station
when not in use and allow to cool
before moving or cleaning.
●
It is extremely dangerous to direct
the steam towards people or
animals.
●
Only use water with this appliance.
●
During use, the steam station must
be stable and used in a horizontal
position.
●
Never attempt to attach any
unauthorised accessories to the
steam station. Outlet 19 should only
be used with the Delonghi Multicare
accessory kit.
●
Never let the iron touch or rest
against the water tank.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the steam station.
2
Loading...