DeLonghi EXAM44055G, EXAM44055B, EXAM44055W User Manual

Download

Instructions for use

EXAM44X.5Y

FEB4455

Rivelia Contents

DESCRIPTION OF THE MACHINE .................................................................................. 4

DESCRIPTION OF PANEL AND HOMEPAGE .....................................................................6

DESCRIPTION OF THE ACCESSORIES ............................................................................. 7

DESCRIPTION OF MILK CARAFE ................................................................................... 8

USING THE MACHINE FIRST TIME ................................................................................9

Select your language ..............................................................................................9

Select the day and time ..........................................................................................9

Fill the water tank ................................................................................................10

Prepare the machine ............................................................................................10

Fit the bean hopper ..............................................................................................10

Using for the rst time..........................................................................................10

Tips .......................................................................................................................11

Check the hardness of the water ...........................................................................11

Setting water hardness.........................................................................................11

Proles .................................................................................................................12

Tutorial .................................................................................................................12

TURNING THE MACHINE ON ...................................................................................... 13

TURNING THE MACHINE OFF ..................................................................................... 14

Switching o for extended periods .......................................................................14

MENU SETTINGS ...................................................................................................... 15

Rinsing ................................................................................................................15

Descaling .............................................................................................................15

Water lter ...........................................................................................................15

General .................................................................................................................15

Auto-o................................................................................................................15

Support ................................................................................................................16

Grind & Empty ......................................................................................................16

Cleaning the milk carafe .......................................................................................16

Coee temperature ..............................................................................................17

Statistics ...............................................................................................................17

Languages ............................................................................................................17

Day and time ........................................................................................................17

Coee grinder settings .........................................................................................18

Water hardness.....................................................................................................18

Empty circuit .......................................................................................................19

Default values .....................................................................................................19

COFFEEBASED DRINKS .................................................................................... 20

Setting up the machine to make coee-based drinks ...........................................20

Directly selected drinks.........................................................................................20

customised coee-based drinks ...........................................................................20

Preparation with pre-ground coee .....................................................................21

EXTRA SHOT ............................................................................................................ 23

INDICATIONS FOR MAKING COFFEEBASED DRINKS .................................................... 24

Tips for a hotter coee ..........................................................................................24

BEAN ADAPT TECHNOLOGY ......................................................................................25

COFFEE ROUTINE ..................................................................................................... 26

MILKBASED DRINKS

Preparing the milk carafe .....................................................................................27

Which milk to use? ...............................................................................................27

Filling and attaching the milk carafe ....................................................................27

Adjusting the amount of froth ..............................................................................28

Making milk-based drinks ....................................................................................28

Cleaning the milk carafe after use ........................................................................28

....................................................................................... 27

MAKING “TO GO” BEVERAGES ....................................................................................30

Cleaning the De’Longhi travel mug (sold separately) every time after use ...........31

HOT WATER ............................................................................................................. 32

“MY” FUNCTION ....................................................................................................... 33

Choose the drink (Use the beans left in the coee grinder to make a drink): ........35

Grind & Empty (Run a grinding cycle without preparing any drink, to empty the grinder of its con-

tents) ....................................................................................................................35

You can now switch the bean hopper ...................................................................35

CLEANING THE MACHINE .......................................................................................... 36

Internal circuit of the machine ..............................................................................37

Bean hopper .........................................................................................................37

Coee grounds container ......................................................................................38

Drip tray and drip tray grille .................................................................................38

Inside of the machine ...........................................................................................39

Water tank ............................................................................................................39

Coee spouts ........................................................................................................40

Pre-ground coee funnel .....................................................................................40

Removable brewing unit ......................................................................................40

Thorough cleaning of milk carafe .........................................................................41

DESCALING .............................................................................................................. 43

WATER SOFTENER FILTER ......................................................................................... 46

Installing the lter ................................................................................................46

Replacing or removing the lter ...........................................................................46

FREQUENT AND ALARM MESSAGES ...........................................................................48

FAQ ................................................................................................................. 54

Rivelia

Description of the machine

MAX

Bean hopper with lid

A1. A2. Lid covering accessories/pre-ground coee compartment A3. Coee spouts (height-adjustable) A4. Flap covering milk carafe connector/hot water spout A5. Drip tray A6. Power cord A7. Water tank with lid A8. Brewing unit access ap (accessible when water tank is removed) A9. Coee grinding adjuster ring

A18

A17

A16

MAX

A14

A12

A10

A13

A15

A11

A10. Grounds container A11. Grounds container support A12. Cup grille A13. Drip tray grille A14. Drip tray water level indicator A15. Drip tray A16. Brewing unit housing A17. Brewing unit A18. Grind setting indicator

Rivelia

Americano

Description of panel and homepage

WATCH THE VIDEO

B1B4

HERE

C10

Milk

Coffee

B2B3

B1. ON/Standby button B2. Coee-based drinks selection button B3. Milk-based drinks selection button B4. Prole selection button

C2 C3

Espresso

Cappuccino

Coffee

C1. Selected prole C2. Coee Routine C3. Bean Adapt Technology C4. Filter spent indicator C5. Descale warning indicator C6. Milk carafe Clean indicator C7. Energy saving indicator C8. Settings menu C9. Direct drink selection C10. Drink customization bar

Rivelia

Description of the accessories

D1 D2 D3 D4

Decalcicante per macchine da caè

Descaler for coee machines

Détartrant pour machines à café

Entkalker für Kaeemaschinen

De’Longhi Appliances s.r.l.

Via L. Seitz, 47 31100 Treviso - ITALY

Tel. +39 0422 4131

5413218631/04.15

INSIDE THE MACHINE ACCESSORIES COMPARTMENT A2

D1. Pre-ground coee scoop/brush D2. Hot water spout D3. Removable pre-ground coee funnel

ON THE SOCKET WHERE THE BEAN HOPPER IS FITTED TO THE MACHINE

D4. Coee grinder protective cover

D7D6 D8D5

IN THE ACCESSORIES PACK

D5. "Water Hardness Test" strip D6. Descaler D7. Interchangeable bean hoppers D8. Water softener lter

Rivelia

Description of milk carafe

E1.

Froth adjustment/Clean dial

E2. Milk carafe lid E3. Milk spout (height-adjustable) E4. Milk spout extension E5. Milk carafe connector (removable for cleaning) E6. Milk intake tube (silicone) E7. Milk container

WATCH THE VIDEO

Rivelia

Using the machine ﬁrst time

HERE

Please note:

• Possible traces of coee in the grinder are the result of settings tests performed on the machine before sale, proof of the meticulous care and attention we invest in our products.

• When used for the rst time, all removable accessories that make contact with water or milk (milk carafe, water tank) should be rinsed with hot water. For best results, wash the milk carafe in a dishwasher.

MAX

1. Connect the power cord to the mains supply

The machine switches on and will show you how to set it up the way you prefer and the Rivelia will be ready for use!

Here are the essentials:

Fresh drinking water

Hot water spout

Bean hopper

(you’ll nd it in the accessories pack)

Your favourite coee beans

A container

(make sure the capacity is at least 0.2 litres)

Water hardness test

(you’ll nd it in the accessories pack)

(g. 1).

: follow

the instructions displayed

Select your language

2. Scroll through the pages of the display (g. 2) until your language appears, then select the corresponding ag;

3. Press “Done” to go to the next step.

Select the day and time

Milk

Coffee

4. Select the exact day and time and press “Next”: select the day and time display format and press “Next".

Fill the water tank

5. Detach the water tank.

Please note:

Tilt the water tank slightly to ensure that it separates correctly from the machine (g. 3).

6. Fill the tank with fresh drinking water up to the MAX level (g. 4) and reposition it in the machine, then press "Next".

4 5

MAX

6 7

11. Take one of the bean hoppers, turn it upside down and check that

12. Fill the bean hopper with the beans you want to use and close it

13. Position the bean hopper in the socket and twist clockwise to lock it

9 10

Prepare the machine

7. Open the lid of the accessories compartment and take out the hot water spout (g. 5).

8. Push down the ap of the milk carafe connector/hot water spout and attach the

MAX

hot water spout (g. 6). Press "Next".

Fit the bean hopper

9. Check that the grind setting indicator is set to “5”, and if not, set it to “5”. Press "Next".

10. Remove the protective cover of the coee grinder from the bean hopper socket.

the bottom section is securely closed: to make absolutely sure, turn the bottom section anticlockwise until a click is heard (g. 7). The bean hopper is closed correctly when the two arrows are aligned (g. 8). Press "Next".

securely again: press "Next".

in place. To ensure it is tted correctly, align the

symbol with the

mark on the lower ring (g.

9) and, when inserted, turn

the hopper to the

position

(g. 12). Press "Next".

Using for the ﬁrst time

14. Position a container of at least 0.2 litres capacity under the coee and hot

water spouts (g. 13).

15. Press "Yes" to start the rinse function. Delivery will stop automatically.

Tips

Tips for use will appear on the display. Read them carefully: they will be of help when using the machine. Press “Next” to continue.

Check the hardness of the water

The machine will prompt for descaling to be carried out after a predetermined period of time based on a nominal water hardness setting. The machine can also be programmed according to the actual hardness of the local water supply, so that the descaling procedure will be required less frequently. Proceed as follows:

1. Press “Start” and remove the "Total hardness test” strip (in the accessories pack) from its wrapper. Press "Next".

2. Immerse the strip completely in a glass of water for about one second.

3. Remove the strip from the water and shake lightly. Press "Next". After about a minute, 1, 2, 3, or 4 red squares will appear, depending on the hardness of the water; each square corresponds to 1 level;

Setting water hardness

4. Press the dot corresponding to the water hardness measured previously, as indicated in the following table:

Test strip Water hardness

Level 1

Level 2

Level 3

Level 4

5. Press "Ok".

6. The machine is now reprogrammed with the new water hardness setting.

Please note:

The water hardness can be changed at any time by way of the settings menu (see “Water hardness”).

This done, the machine is ready to be congured on the basis of your needs and preferences: press “Start”.

Proﬁles

1. Set the number of users for this machine. Press "Next".

2. To customize the number, press on the prole icon, make the choices, then press the button showing the name, press “Change”, and nally press "Save".

3. Press "Next". the proles are conrmed.

WATCH THE VIDEO

HERE

Tutorial

1. Press "Next": the machine is ready to show a short introductory video.

2. Press “Start” and watch the display.

3. The machine illustrates the main functions. Press "Next" to move on to the next screens in sequence;

When the introduction has nished, press “Start ” and enjoy your machine.

Please note:

• The rst time the machine is used, it will be necessary to make 4-5 cappuccinos before the drink in the cup tastes as it should.

• The rst time the machine is used, the water circuit will be empty and operation could be very noisy. The noise becomes less as the circuit lls.

Rivelia

Coffee

Turning the machine on

Please note:

Each time the machine is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The machine is not ready for use until the cycle has been completed.

1. To turn the machine on, press the

button (g. 12): the machine

switches on.

MAX

2. Once the machine has heated up it starts a rinse cycle, during which hot water is delivered from the coee spout; in addition to heating up the boiler, this has the eect of heating up the internal circuits as hot water is circulated through them.

Rivelia

Turning the machine o

Whenever the machine is turned o after being used to make coee, it will run a rinse cycle automatically.

1. To turn the machine o, press the button (g.12).

2. If envisaged from the coee spouts , then switches o (stand-by).

Important!

Never unplug the machine while it is switched on.

Switching o for extended periods

If the machine is not going to be used for any length of time (e.g. holidays, periods of absence), follow the directions in heading Empty circuit. In the event of the machine not being used for a few days, proceed as follows:

• Press the button to turn the machine o;

• empty out and clean the grounds container and the water tank (g.

16);

• unplug the power cord from the socket.

Please note:

When turning the machine on again, ll the water tank and, before making any kind of drink, run 3 rinse cycles as indicated in section

Rinsing.

, the machine runs a rinse cycle, delivering hot water

Rivelia

Menu settings

Rinsing

Using this function, hot water can be delivered from the coee spouts to clean and heat the internal circuit of the machine. Place a container of at least 0.2 litres capacity under the spouts (g. 11). To activate this function, proceed as follows:

1. Press

2. Scroll through the pages until the item “Rinse” is displayed;

3. Press "Yes" to start delivery: after a few seconds, hot water is de-

4. To stop rinsing, press "Stop", or wait for the rinse cycle to stop

Please note:

• If the machine is not used for more than 3-4 days, it is highly ad-

• Water may nd its way into the grounds container during the rinse

to access the settings menu (g. 13).

livered from the coee spout to clean and heat the internal circuit of the machine.

automatically.

visable, when turning it on again, to run 2-3 rinses before use;

procedure: this is quite normal.

Descaling

For instructions on descaling the machine, go to “Descaling”.

Water ﬁlter

For instructions regarding the water lter, go to “Water softener lter”.

General

1. Press to access the settings menu (g.13).

2. Scroll through the pages until the item “General” is displayed;

In this section of the menu, the following functions can be activated or deactivated with a simple tap:

- "Audible warning": when enabled, the machine beeps whenever an operation is performed.

- "Energy saving": use this function to enable or disable energy saving. When active, the function reduces energy consumption in com-

pliance with current European regulations: the on the homepage.

3. Press "X" to save the new selec tion and go back to the homepage.

Please note:

The serial number of the machine is displayed on the screen: this is useful for identication purposes.

symbol appears

Auto-o

Auto-o can be set so that if the machine is not being used, it will switch o after 15 or 30 minutes or after 1 or 3 hours have elapsed.

To programme Auto-o, proceed as follows:

1. Press

2. Scroll through the pages until the item “Auto-o ” is displayed;

3. Select the desired time interval (15 or 30 minutes, or 1 or 3 hours).

4. Press "X" to save the new selec tion and go back to the homepage.

to access the settings menu (g.13).

Support

1. Scan the QR-Code to see the manual and access support.

2. Press “X” to go back to the homepage.

Grind & Empty

This function, which clears away residual beans by grinding them up, can be used to empty the coee grinder (not the bean hopper).

1. Press

2. Scroll through the pages until the item “Grind&Empty” is displayed;

3. Press “Read more”;

4. Twist the bean hopper to the unlocked position ( ) (g. 14) and

5. Press “Start”: the machine will grind any beans there may be left

6. When done, remove the bean hopper and either position the other

7. The homepage reappears, and the machine is ready for use.

Important!

• The presence of powdery coee residues in the bean hopper sock-

• If the bean hopper proves dicult to t, make sure there are no

to access the settings menu (g.13).

leave it there until the operation has been completed.

in the grinder.

one (see “Fit the bean hopper”) or t the protective cover over the coee grinder (g. 15).

et is perfectly normal.

coee beans in the hopper socket on the machine. If traces of coffee are found, clean the bean hopper socket with the brush provided and wipe with a soft clean cloth. Remove powdery coee residues with a vacuum cleaner.

Cleaning the milk carafe

The machine oers a tutorial on thorough cleaning of the carafe, which will ensure smooth operation of the Lattecrema system over time.

1. Press

2. Scroll through the pages until the item “Cleaning the milk carafe”

3. Press “Next" or “Back” to read the suggested sequence of steps.

4. When at the nal step, press “Done” to go back to the settings menu.

5. Press “X” to go back to the homepage.

to access the settings menu (g. 13).

is displayed.

Please note:

The procedure is illustrated in heading Thorough cleaning of milk carafe

Coee temperature

To change the temperature of the water used to make coee, proceed as follows:

1. Press

2. Scroll through the pages until the item “Coee temperature” is

3. Press “Set”.

4. Select the required temperature from those suggested;

5. Press “<” to save the new selection and go back to the settings

6. Press “X” to go back to the homepage.

Please note:

The eect of varying the temperature is most noticeable with long drinks.

Bean Adapt Technology

We suggest accessing Bean Adapt Technology from the homepage, so that this parameter can be set as appropriate for the particular coee bean used.

to access the settings menu (g.13).

displayed;

menu;

Statistics

This function displays statistics relating to the machine. To view the statistics, proceed as follows:

1. Press

2. Scroll through the pages until the item “Statistics” and the main data

3. Press “<” to quit the page.

4. Press “X” to go back to the homepage.

to access the settings menu (g. 13).

are displayed; To see further information, press “Read more”.

Languages

To change the language of the homepage, proceed as follows:

1. Press

2. Scroll through the pages until the item “Languages” is displayed:

3. Press “Set”.

4. Press the ag corresponding to the desired language: the display is

5. Press "<" to save the new selection and go back to the settings

6. Press “X” to go back to the homepage.

to access the settings menu (g. 13).

updated immediately and presented in the selected language.

menu;

Day and time

To change the day and time on the homepage, proceed as follows:

1. Press to access the settings menu (g. 13).

2. Scroll through the pages until the item “Day and time” is displayed;

3. Press “Set”.

4. Set the hour and minutes, and the day, and select the format. Press “Ok” to conrm (or “<” to cancel and go back to the previous step.

5. Press “X” to go back to the homepage.

Coee grinder settings

The machine oers a tutorial on how to adjust the coee grinder correctly and ensure the best results.

1. Press

2. Scroll through the pages until the item “Coee grinder settings” is

3. Press “Read more”; to watch tutorial on how to adjust the level of

4. When at the nal page, press “Ok” to go back to the settings menu.

5. Press “X” to go back to the homepage.

Please note:

• After completing the above procedure, at least 3 coees should

• The adjuster ring must be turned only when the coee grinder

Bean Adapt Technology

We suggest accessing Bean Adapt Technology from the homepage, so that this parameter can be set as appropriate for the particular coee bean used.

to access the settings menu (g. 13).

displayed.

grinding. Press “Next" or “Back” to read the advice.

be prepared and delivered before making any further adjustment to the coee grinder. If coee delivery is still not correct, repeat the procedure.

is in operation during the initial step of preparing coee-based drinks.

Water hardness

To enter a new water hardness setting, proceed as follows:

1. Measure the water hardness as described above, see “Check the

hardness of the water”.

2. Press

3. Scroll through the pages until the item “Water hardness” is dis-

4. Select the level corresponding to the result give by the test strip.

5. Press "<" to save the new selection and go back to the settings

6. Press “X” to go back to the homepage.

to access the settings menu (g. 13).

played. Press “Set”.

menu.

MAX

Empty circuit

To avoid the water in the circuit freezing if the machine is to be left idle for an extended period, or before taking it to a service centre, it is advisable to drain the water circuit. Proceed as follows:

1. Press

to access the settings menu (g. 13).

2. Scroll through the pages until the item “Empty circuit” is displayed.

3. Press "Ok" to start the guided procedure;

4. Remove, empty and reposition the grounds container and the drip tray (g. 16), then press "Next";

5. Position a container of 0.2l capacity under the spouts (g. 11). Press "Next".

6. The machine runs a rinse cycle, delivering hot water from the spouts.

7. Once rinsing is complete, remove the water tank (g. 3) and empty it.

8. Remove the lter (if installed) from the water tank and press "Next".

9. Reposition the tank (empty) and press "Yes";

10. When ready, press “Yes” to conrm.

11. Wait for the machine to empty the circuit; (Caution: beware of hot water coming from the spouts!). As the water circuit gradually empties, the machine could become noisier: this is a normal aspect of operation.

12. Once the circuit has emptied, remove, empty and reposition the drip tray, then press "Yes";

13. Press "Ok": the machine will switch o (standby).

14. Unplug the machine from the mains power supply.

15. The

next time the machine is turned on, follow the instructions in sec-

tion “

“Using the machine rst time”

”.

Default values

This function resets all menu settings and all user customizations, restoring the factory default values (with the exception of the language, which remains as set, and the statistics). Proceed as follows:

1. Press

2. Scroll through the pages until the item “Default values” is displayed.

3. Press “Read more”:

4. Select the items you want to reset: machine or individual prole,

5. Follow the relative instructions until prompted to conrm, and press

6. Press “X” to go back to the homepage (C).

Please note:

Whenever the machine (not the individual prole) is reset to the factory default values, the system will suggest running the rst time start-up operations from Proles

to access the settings menu (g. 13).

then press "Next";

“Ok”;

Rivelia

Americano

Coffee

Americano

Espresso

lungo

Coee-based drinks

Milk

Americano

Coffee

Espresso Coffee

Milk

Americano

Espresso

lungo

Long 2x Espresso Espresso

Espresso

Your machine can be used to make a great variety of drinks: scroll through the options on the display until you see the one you want (g. 17):

Hot Cold

Espresso

2X Espresso

Coffee

Espresso lungo

Coee

Long

Americano

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Setting up the machine to make coee-based drinks

Important!

Do not use green, caramelized or candied coee beans as they could stick to the coee grinder and render it unusable.

1. Place 1

or 2 cups under the coee spout.

2. Lower the spout as near as possible to the cup (g. 18): this makes a creamier coee.

Directly selected drinks

1. Touch the image on the homepage that illustrates the desired coee drink (e.g. espresso, g. 19).

2. Hot coee-based drinks: the machine proceeds with preparation.

Cold coee-based drinks:

• Select either an “Ice” drink or an “Extra ice” drink: press “Next";

• Depending on the selection made, the machine will suggest the

amount of ice to add to the drink before proceeding with preparation: place the recommended number of ice cubes in the glass (g. 20): press “Deliver”.

• The machine proceeds with the preparation.

A description of each single step (grinding, delivery of coee) appears on the display. Once the preparation has been completed, the machine is ready for use again.

customised coee-based drinks

To make coee-based drinks with customised parameters, proceed as follows:

✕ ✕

Coffee

Americano

1. Press the customization bar at the bottom of the image corresponding to the desired drink (e.g. espresso, g. 21). The parameters that

Espresso

Milk

lungo

can be customized according to preference appear on the display:

Quantity

Intensity

2. Hot coee-based drinks: After setting the parameters, press “Deliver”: the machine proceeds with preparation and a description of each single step (grinding, delivery of coee) appears on the display;

Cold coee-based drinks: Select the quantity, then press Start

and proceed as follows:

• Select either an “Ice” drink or an “Extra ice” drink: press “Next";

• Before delivering the drink, the machine suggests an appropriate

number of ice cubes to add: place the quantity of ice indicated in the glass (g. 22): press “Deliver”.

• The machine proceeds with the preparation. A description of

each single step (grinding, preparation, delivery of coee) appears on the display.

3. When delivery has ended, press “Save” to store the new settings or “Cancel” to retain the previous parameters. You can also save them in your Coee Routine by ticking the relative box

Please note

If saved, the new settings will be stored ONLY in the selected prole.

The machine is ready to be used again.

Preparation with pre-ground coee

Important!

• Never add pre-ground coee when the machine is o, or it could spread through and soil the inside of the machine. This could damage the machine.

• Never use more than one level scoop as it could dirty the inside of the machine or block the funnel.

• When using pre-ground coee, you can make only one cup at a time.

• Making Long or 2X Espressocoee: halfway through preparation, when prompted by the machine, add one level scoop of pre-ground coee and press "Ok".

1. Press the customization bar at the bottom of the image corresponding to the desired drink (e.g. espresso, g. 21). The parameters that can be customized according to preference appear on the display:

2. Select “Pre-ground”

3. Choose the quantity and press “Deliver”.

4. Lift the lid of the accessories compartment (g. 22).

5. Check that the pre-ground coee funnel is inserted and make sure it is not blocked; add one level scoop of pre-ground coee (g. 23) . Press "OK" to proceed with delivery.

6. The machine proceeds with preparation and a description of each single step (water heating, delivery of coee) appears on the display.

Once the preparation has been completed, the machine is ready for use again.

;

Rivelia

Extra shot

Give a boost to the following drinks by adding an extra shot of espresso:

Hot

Espresso

Espresso lungo

Long

Coee

Americano

Cappuccino

Latte Macchiato

Espresso Macchiato

Caelatte

Cappuccino Mix

Cortado

Flat White

Proceed as follows:

2. Press “Extra Shot”, then “Ok”.

3. Select the desired quantity and intensity. Press “Deliver”.

4. Conrm by pressing "Ok". (Ticking the box, the message will not be displayed again).

5. The machine proceeds with preparation and a description of each single step appears on the display.

6. When delivery has ended, press “Save” to store the new settings or “Cancel” to retain the previous parameters. You can also save them in your Coee Routine by ticking the relative box. In this instance, the Extra Shot is indicated by the symbol in the customization bar of the drink.

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Please note

If saved, the new settings will be stored ONLY in the selected prole.

The machine is ready to be used again.

Rivelia

Indications for making coee-based drinks

• When the machine is making coee, delivery can be interrupted at any moment by pressing “Stop” or “Cancel”.

• At the end of delivery, to increase the quantity of coee in the cup, simply press " reached, press “

• Sundry alarm messages could be displayed while using the machine (“Fill tank with fresh water up to the MAX level”, etc.) their meaning is explained in section “Frequent and alarm messages”.

• If the coee emerges drop-by-drop,too weak and not creamy enough or too cold, refer to the tutorial on adjusting the coee grinder (see heading “Coee grinder settings”) and section “FAQ”.

• If “Energy Saving” mode is activated, there may be a few seconds delay before the rst coee is delivered.

Tips for a hotter coee

To make a hotter coee, proceed as follows:

• run a rinse cycle before preparing and delivering the coee (see

“Rinsing” in the settings menu

• warm the cups with hot water using the hot water function (see section “Hot water”).

• select a higher temperature setting for the coee (see “Coee tem-

perature” in the settings menu

Extra". When the required quantity has been

Stop” or “Cancel”.

Rivelia

Coffee

Bean adapt technology

Bean Adapt

Light Dark

Medium X-Dark

A coee expert at your ngertips to help you optimise coee brewing and the result in your cup in just a few steps. Smart technology guides you through adjustment and operation of the machine, according to the selected coee beans: from grinding to brewing, each step will be controlled to get the best from any coee bean.

1. On the homepage, press

(g. 24).

2. Enable Bean Adapt (g. 25).

3. The machine shows a reminder that before any adjustment of the coee grinder, at least 3 coees need to be made. Press Ok.

4. Select the variety of coee bean being used: 100% Arabica or a blend of Arabica and Robusta (this information will be found on the pack containing the beans). Press i for additional information. Press "Next".

5. Select the type of roast, tapping the colour depth description that appears closest to the colour of the beans (g. 26). Press i for additional information. Press "Next".

The machine will now check how the settings can be adjusted to give the best possible outcome, based on the information it has:

6. Check the current setting of the coee grinder and select it from the drop-down menu. Press i for additional information. Press "Next".

7. Press “Deliver” to prepare an Espresso. Following delivery, press "Next".

8. The machine will ask how the coee tasted and, according to the answer it gets, recommend the optimum parameters: press "Next” on each page to bring up the next parameter:

- Coee temperature;

- Intensity;

- Coee grinder setting (turn the indicator ring only when the beans are actually being ground) (g. 27).

9. Tap

on the name of the beans and the keyboard pops up to

allow changes. To conrm the current name, press "Ok”.

10. Press “Save”: the machine stores the settings and the name of the bean appears in place of the

logo.

Please note

• Bean Adapt Technology is applicable only to Espresso coee.

• Up to 6 dierent bean proles can be stored. All the stored proles are accessed by pressing the name on the homepage.

Rivelia

Coffee

Americano

Coffee

Coee Routine

Espresso

Coffee Routine

Espresso

lungo

With the Coee Routine function, Rivelia can remember how you like your coee during the day and update your drinks list.

1. On the homepage, press the symbol corresponding to the current coee routine (g. 28).

2. Activate the coee routine (g. 29) and press “Yes” to conrm.

3. A symbol appears on the homepage, which will dier according to the time of day (g. 30).

In this way the machine is able to oer the preferences saved from previous preparations: your favourite coee, just how you like it.

Please note

To disable this function, go to the homepage and press the symbol indicating the current coee routine, then press the “Coee Routine” button (g. 29). In this instance:

• conrm that the function is to be disabled by pressing “Yes”;

• the machine prompts for an existing routine to be selected and conrmed with “Ok”.

This symbol

now appears on the homepage, replacing the symbol

of the coee routine currently selected.

Rivelia

Milk-based drinks

Preparing the milk carafe

Please note

To avoid the preparation of milk with insucient froth or large bubbles, always clean the milk carafes as described in headings “Cleaning the

milk carafe after use” and “Thorough cleaning of milk carafe”

Which milk to use?

The quality of the froth will vary depending on:

• the temperature of the milk or vegetable drink used (for best re-

• type of milk or vegetable drink;

• the brand used;

• ingredients and nutritional values.

WATCH THE VIDEO

HERE

sults, always use milk or vegetable drink straight from the fridge, 5 °C);

Cow's milk

Whole (fat >3,5%)

Semi-skimmed (fat between 1.5 and 1.8%)

Skimmed (fat <0.5%)

Vegetable drinks

✓

Soya

Almond

Oatmeal

✓

Filling and attaching the milk carafe

1. Raise the lid and ll the milk container with a sucient quantity of milk, not exceeding the MAX level marked on the container (g. 31);

2. Make sure the milk intake tube is secured correctly to the socket located on the underside of the milk carafe lid (g. 32);

3. Reposition the lid on the milk container;

Coffee

Americano

Coffee

Americano

4. Lower the ap and attach the carafe to the connector, pushing it fully home (g. 33). The machine emits a beep (if the beep function is enabled);

5. Place a suciently large cup under the coee spouts and under the milk spout. The milk spout can be lengthened by adjusting the extension (g. 34);

6. Select the desired drink as described in the following steps.

Adjusting the amount of froth

Turn the froth adjustment dial to select the amount of froth on the milk that will be delivered when making milk-based drinks.

Dial position Recommended for…

• Caelatte

Delicate

• Latte Macchiato

Creamy

Dense

• Flat White

• Cortado

• Cappuccino

• Cappuccino Mix

• Espresso Macchiato

• Hot Milk (frothed)

Making milk-based drinks

On the homepage, press directly on the image corresponding to the re-

Cappuccino

Milk

Caffelatte

quired drink (g. 35). As in the case of coee-based drinks, a drink can be customized by pressing on the bar at the bottom of the image on the homepage (g. 36). To stop deliver y manually, press "Stop" or "Cancel"

Cleaning the milk carafe after use

Every time a milk-based drink is delivered, the machine will prompt the user to clean the carafe (Clean function) to ensure that the lid of the carafe is not left unwashed. To start cleaning, proceed as follows:

1. Leave the milk carafe in the machine (there is no need to empty the container);

2. Place a cup or other recipient under the milk spout (g. 37);

Cappuccino

Milk

Caffelatte

3. Turn the froth adjustment/clean dial to the "Clean" position (g.

38): hot water and steam are delivered from the milk spout. Clean-

ing stops automatically;

4. Turn the dial back to one of the froth selections;

Where several drinks are prepared in succession:

• To proceed with further preparations, when the message to clean the carafe appears (Clean function), press “Cancel”. Proceed with cleaning of the carafe after the nal preparation.

After multiple preparations, the milk container is empty or the milk that remains is not enough to make further drinks

• Having carried out the cleaning step (with the “Clean” function), disassemble the milk carafe and clean all components, proceeding as described in heading “Cleaning the milk carafe after use”

After multiple preparations, there is enough milk left in the container to make further drinks

• Having carried out the cleaning step with the “Clean” function, remove the milk carafe and put it straight in the refrigerator. The “HOT” carafe which time all components should be cleaned as described in the heading “Thorough cleaning of milk carafe”.

Important:

If the milk carafe is left out of the refrigerator for more than 30 minutes, disassemble and clean all components, proceeding as described in the heading

Following preparation of milk-based drinks — general notes:

• If the milk carafe is not cleaned, the symbol homepage as a reminder that cleaning is required.

• In certain cases, the machine will need to heat up before cleaning can take place.

• To ensure correct cleaning, wait for the CLEAN function to end. The function is automatic. It must not be stopped while in progress.

can be kept in the refrigerator no more than 2 days, after

“Thorough cleaning of milk carafe”.

appears on the

Rivelia

Coffee

Making “To Go” beverages

The “To Go” function is ideal for anyone wanting to create a customized drink to take away. Search the delonghi.com website to nd the recommended travel mug for your machine:

Travel mug (not included) (capacity 236 ml/ 130mm)

Type: DLSC074

EAN: 8004399024465

Coffee

The “To go” function can be used for preparation of the following drinks:

Hot Cold

Coee

Americano

Cappuccino

Latte Macchiato

Caelatte

Cappuccino Mix

Flat White

Milk

Proceed as follows:

1. Press the customization bar at the bottom of the image corresponding to the desired drink (e.g. espresso, g. 21). The display shows the parameters that are customizable according to preference, and the functions that can be selected:

2. Select

3. Press “Next”, then “Ok”.

4. Pressing quantity of the drink, and therefore to the requisite size of the travel mug (g. 40).

5. Press

6. The new quantity of the “to go” drink will be stored and set automatically for the next time the drink is prepared. Press “X”.

7. Press “Brew”: the machine proceeds with preparation of the drink.

Please note:

• Each time a dierent mug is used, it is advisable to stay close to the machine to check the amount of liquid eectively dispensed.

(g. 39): this accesses the “To go” func tion.

the display will show information relating to the

(g. 41) to select the quantity of the drink: press “Save”.

✓ ✓ ✓ ✓ -- ✓ -- ✓ -- ✓ -- ✓ -- ✓ --

• If saved, the new settings will be stored ONLY in the selected prole.

• To maintain the temperature of hot drinks, preheat the travel mug with hot water.

• It is advisable to use the travel mug only for the drinks indicated on the homepage.

• If the intention is to use a travel mug other than the one supplied, bear in mind that it must be no taller than 14 cm.

Important

• Before screwing on the lid, open the cap to release the pressure;

• Whenever drinks have been prepared with milk, clean the carafe as indicated in the section “Following preparation of milk-based drinks

— general notes:”.

• The contents should be used within 2 hours maximum: once this time has elapsed, empty and clean the mug as described in the following section.

• For more information, refer to the leaet accompanying the travel mug.

Cleaning the De’Longhi travel mug (sold separately) every time after use

In the interests of hygiene, the travel mug should always be cleaned after use. Do not use abrasive materials that could damage the surface of the container. Proceed as follows:

1. Unscrew the lid and rinse the container and lid with warm drinking water (40°C).

2. Soak the components in warm water (40°C) and washing up liquid for at least 30 minutes. Do not use scented detergents.

3. Clean the inside of the container and the lid with a clean sponge and washing up liquid, removing any visible dirt.

4. Rinse all components with warm drinking water (40°C).

5. Dry all components with a clean, dry cloth or paper towels, then reassemble.

6. Wash the lid in the dishwasher once a week. The metal container is not dishwasher safe.

Rivelia

Hot water

1. Push down the ap of the accessories compartment and attach the hot water spout (g. 6). Press "Next".

2. Place a cup under the hot water spout.

3. On the homepage:

• press directly on the image corresponding to hot water: delivery begins;

• press the customization bar at the bottom of the image and select the quantity to be delivered, then press “Brew”: delivery begins;

4. Delivery will stop automatically.

Please note

• To stop deliver y manually, press "Stop" or "Cancel"

• Immediately after delivery has stopped automatically, the quantity can be increased by pressing “Ex tra”.

Rivelia

“My” function

With the “my” function, you can select the quantity of each single ingredient used for preparation of the hot drink you want to make.

1. Check that the prole selected is the prole for which you want to customize the drink;

2. Press the customization bar under the image of the desired drink (e.g. espresso, g. 21).

3. Press ;

4. Press “Start”,

5. When preparing coee based drinks, select the intensity or the “Bean Adapt” function: press "Next";

6. Make sure that a cup of the right size is placed under the coee spout, and press “Brew”;

7. As the drink is delivered, a progress bar will ll up gradually. Once the minimum programmable quantity is reached, the “Stop” button will be enabled. The “

8. When the quantity in the cup is as desired, press “Stop”;

9. Press “Save” to store the new parameters for the drink under the selected prole: if “Coee Routine” is enabled, the machine will suggest the option of saving the drink for that particular time of the day.

Please note

• If saved, the new settings will be stored ONLY in the selected prole.

• Customizing a single drink, the respective double version of the drink is automatically customized as well.

• It is possible to exit programming mode at any given moment by pressing “X”: the values will not be saved.

• To disable the function and prepare the drink using other parameters, press the customization bar relative to the drink: press

on the page to disable the function (

revert to the factory default values.

• To reprogramme the My drink, the parameters must be reset to the factory default values: press the customization bar of the drink and check that the function is enabled ( "Reset” to restore the factory default values for the drink. The drink can now be reprogrammed.

” symbol indicates the previous quantity.

) and

). Press

Quantities table

Drink Standard quantity Programmable

quantity

Espresso 40ml 20-180 ml

⇢

2X Espresso 40 ml + 40 ml 20-180 ml + 20-180 ml

Espresso lungo 120ml 60-180 ml

Coee 180ml 100-270 ml

Long 160ml 115-250 ml

Americano 150ml 70-480 ml

Hot water 250ml 20-420 ml

Coffee

WATCH THE VIDEO

Rivelia

Bean switch

Choose a drink Grind & Empty

HERE

Switch the bean hopper to enjoy a dierent blend of coee beans Proceed as follows:

1. Twist the bean hopper to the unlocked position (g. 42) and leave it there until the end of the procedure;

2. The display shows the options for the “Bean Switch”: select one of the options and follow the procedure (g. 43):

Choose the drink (Use the beans left in the coffee grinder to make a drink):

3. Select “Choose the drink”.

4. Press “Start”: the homepage displays the drinks you can choose from (the intensity is already set and cannot be changed).

5. Press “Ok” and prepare the drink as usual (Tick the box; the message will not be displayed again).

Grind & Empty (Run a grinding cycle without preparing any drink, to empty the grinder of its contents)

3. Select “Grind & Empty ”

4. Press “Start” and wait for the machine to nishing grinding.

You can now switch the bean hopper

5. Remove the bean hopper (g. 44);

6. Insert the new hopper and twist clockwise to secure it in the socket. To carry out the operation correctly, align the unlock symbol with the notch on the adjuster ring (g. 45) and, when inserted, twist the bean hopper into the locked position (g. 46).

Please note

If the bean hopper is switched without emptying the coee grinder, the coee delivered subsequently will be made with a blend of old beans and new beans.

Important!

• The presence of powdery coee residues in the bean hopper socket is perfectly normal.

• If the bean hopper proves dicult to t, make sure there are no coee beans in the socket on the machine that holds the bean hopper. If traces of coee are found, clean the bean hopper socket with the brush provided and wipe with a soft clean cloth. Remove powdery coee residues with a vacuum cleaner.

MAX

WATCH THE VIDEO

Rivelia

Cleaning the machine

INTERNAL CIRCUIT OF THE

MACHINE

DRIP TRAY AND DRIP TRAY

GRILLE

BEAN HOPPER

INSIDE OF THE MACHINE

HERE

COFFEE GROUNDS

CONTAINER

MAX

WATER TANK

COFFEE SPOUTS

PREGROUND COFFEE

FUNNEL

“THOROUGH CLEANING OF MILK CARAFE”

Please note

• Do not use solvents, abrasive detergents or alcohol to clean the machine. With De’Longhi superautomatic coee machines, no chemical additives are required for cleaning purposes.

• Do not use metal objects to remove encrustations or coee deposits as they could scratch metal or plastic surfaces.

REMOVABLE BREWING

UNIT

Which items are dishwasher-safe

Grounds container

Internal circuit of the machine

If the machine has not been used for more than 3-4 days, it is strongly recommend that before any further use, it should be switched on and rinsed 2 or 3 times, selecting the relative function “Rinsing”.

Please note

Water may nd its way into the grounds container during the above cleaning procedure: this is quite normal.

Bean hopper

Clean the bean hopper periodically. Proceed as follows:

1. Twist the bean hopper to the unlocked position (g. 42) and leave it there until the end of the procedure: the machine is now in “Bean Switch” mode (g. 43);

2. Select one of the modes available (Choose the drink (Use the beans

left in the coee grinder to make a drink):or Grind & Empty (Run a grinding cycle without preparing any drink, to empty the grinder of its contents) and carry out the procedure;

3. Next, remove the bean hopper;

Drip tray grille

Drip tray

Hot Lattecrema Carafe

(all components must be disassembled)

4. Remove the lid from the bean hopper. Empty out the hopper, transferring any remaining beans to another recipient;

5. Wipe the inside and the outside of the hopper clean with a soft moist cloth, removing all residual traces of coee.

6. Clean the bean hopper socket on the machine, using the brush and a soft clean cloth. Remove powdery coee residues with a vacuum cleaner.

7. Dry the bean hopper and the lid thoroughly, using a clean dry cloth or absorbent paper: make certain all the surfaces are completely dry.

8. Fill the hopper with coee beans and close with the lid. To carr y out the operation correctly, align the unlock symbol with the notch on the adjuster ring (g. 45) and, when inserted, twist the bean hopper into the locked position (g. 46).

Coee grounds container

When required by the machine, this must be emptied and cleaned. The machine cannot be used to make coee until the grounds container has been cleaned. The machine will display the message indicating the need to empty the grounds container 72 hours after the rst coee has been prepared, even if the container is not full (for the 72 hours to be calculated correctly, the machine must never be disconnected from the mains power supply).

Important! Danger of scalding

If several milk-based drinks are prepared one after the other, the metal cup grille becomes hot. Wait for it to cool down before touching it, and handle from the front only.

To clean (with the machine on):

1. Remove the drip tray and coee grounds container;

2. Empty the drip tray and the grounds container and clean them, taking care to remove all residues that may have collected on the bottom.

3. Reposition the drip tray in the machine, complete with grille and grounds container.

Important!

When removing the drip tray, the coee grounds container must always be emptied, even if it has not lled up noticeably. If this is not done, it can happen that when further coees are prepared, the grounds container will ll up more than expected and clog the machine.

Drip tray and drip tray grille

The drip tray is tted with a oat level indicator (colour red) showing the amount of water it contains (g. 47).

The drip tray must be emptied and cleaned before the indicator starts to project from the cup tray, otherwise the water may spill over the rim and damage the machine, the surface on which the machine is placed, or the surrounding area. To remove the drip tray, proceed as follows:

1. Remove the drip tray with all its components;

2. Separate the grounds container from its support: empty the grounds container;

3. Remove the cup grille and the drip tray grille and wash all components thoroughly: the cup grille cannot be put in a dishwasher;

4. Reposition the drip tray in the machine, complete with all its components.

Important!

Inside of the machine

Danger of electric shock!

Before carrying out cleaning operations on internal parts, the machine must be turned o (see “Turning the machine o”) and unplugged from the mains power supply. Never immerse the machine in water

1. Check periodically (about once a month) that the inside of the machine (accessible after removing the drip tray) is not dirty.

2. Remove all residues with a vacuum cleaner

Water tank

Periodically (about once a month) and whenever the water softener lter is replaced, clean the water tank.

1. Take out the water tank, remove the water softener lter (if installed) and rinse with drinking water;

2. Empty the water tank and clean with warm water (40 °C approx), wiping if necessary with a clean, non-abrasive cloth. Rinse thoroughly under running water;

3. Reinstate the lter, if removed previously, then ll the water tank with fresh drinking water up to the MAX level and return it to the machine.

4. (Only if a water softener lter is installed) release 100ml of hot water to reactivate the lter.

Please note:

If the machine has not been used for more than 3 days, clean the water tank as described above.

Coee spouts

1. Clean the coee spout regularly with a sponge or cloth (g. 48);

2. Check that the holes in the coee spout are not blocked. If necessary, remove coee deposits with a toothpick (g. 49).

Pre-ground coee funnel

Clean the removable pre-ground coee funnel regularly (about once a month). Proceed as follows:

1. Switch o the machine (see “Turning the machine o”);

2. Lift the lid of the accessories compartment (g. 22).

3. Remove the scoop/brush;

4. Take out the removable funnel;

5. Wash the funnel under warm running water (40 °C approx) and dry with a clean cloth. The funnel can also be washed in a dishwasher, in which case a 50 °C is suitable.

6. Return the funnel to the housing and put away the brush;

7. Close the lid.

Important!

After cleaning, check that no accessories have been left in the funnel. The presence of foreign matter in the funnel during operation could cause damage to the machine.

Removable brewing unit

The brewing unit must be cleaned at least once a month.

Important!

The brewing unit cannot be removed while the machine is on.

1. Make sure the machine has run the shutdown procedure correctly (see section “Turning the machine o ”);

2. Remove the water tank (g. 3);

3. Open the brewing unit ap (g. 50) on the right side of the machine, by releasing the top catch;

4. Press the two coloured release buttons inwards (g. 51) at the same time pulling the brewing unit outwards;

5. Immerse the brewing unit in fresh drinking water for about 5 minutes, then rinse under the tap;

Important!

RINSE WITH WATER ONLY NO DETERGENTS  NO DISHWASHER

✔

6. Do not use detergents when cleaning the brewing unit, as they could damage it.

7. Use the brush to remove any coee residues left in the brewing unit housing, visible through the ap.

8. After cleaning, replace the brewing unit by sliding it into its housing, then apply pressure to the component until it clicks into place;

Please note:

If the brewing unit is dicult to t, adapt it to the right size (before insertion) by applying pressure to the two levers (g. 52).

9. Once inserted, make sure the two coloured buttons have snapped out;

10. Close the brewing unit ap and ensure it is rmly in place;

11. Reposition the water tank in the machine.

Thorough cleaning of milk carafe

This operation will guarantee optimum results over time. Proceed as follows:

1. Remove the lid of the milk carafe (g. 53);

2. Detach the milk spout, the milk spout extension and the milk intake tube (g. 54);

3. Turn the froth adjustment dial clockwise to the "Insert" position (g.

55) and pull o;

4. Turn the connector-coupling of the milk carafe anticlockwise and pull out (g. 56).

5. Wash in a dishwasher (recommended) or by hand, as indicated below:

• In a dishwasher: Rinse all components under warm drinking water (at least 40 °C), then place them in the top basket of the dishwasher and run a programme at 50 °C, e.g. Eco standard.

• By hand: Rinse all components carefully with warm drinking water (at least 40 °C) to ensure that all visible residues are removed: make sure the water passes through the holes (g. 57). Immerse all components (including the milk container) in a solution of warm drinking water (at least 40° C) and washing-up liquid for at least 30 minutes. Rinse all components thoroughly with warm drinking water, rubbing them individually between ngers and thumbs.

6. Make sure there are no milk residues left in the cavity and the channel on the underside of the dial (g. 58). If necessary, scrape with a toothpick.

7. Check that the intake tube and the outlet tube are not clogged with milk residues;

8. Dry the components with a clean dry cloth;

9. Reassemble all components of the milk carafe.

Please note:

The machine will give a reminder periodically of the need for thorough cleaning of the milk carafe, and indicate the full sequence of steps.

WATCH THE VIDEO

Rivelia

Descaling

1,5L

HERE

Important!

• Before use, read the instructions and the labelling on the descaler pack.

• Use only descaler supplied by De’Longhi. If unsuitable descaler is used, or descaling is not carried out properly and when required, the machine may develop faults not covered by the manufacturer’s guarantee.

• Descaler can cause damage to delicate surfaces. If the product is accidentally spilt, dry immediately.

To descale

Descaler De’Longhi descaler

Container Recommended capacity: 1.5 litres

Time ~30min

Descale the machine when the corresponding message appears on the homepage: to proceed with descaling straight away, press “Ok” and follow the instructions step by step as indicated on the machine display. To delay descaling until later, press “Cancel”: the homepage will continue to show the out. (The message reappears every time the machine is turned on). To access the descaling menu:

1. Press on the homepage;

2. Scroll through the pages until the item “Descale” appears;

3. Press "Start" to enter the guided descale procedure;

4. Press "Yes” to start;

5. Attach the hot water spout (g. 6) (this is kept in the accessories

6. Remove and empty the drip tray and the coee grounds container

7. Remove the water tank, lift the lid and remove the lter (if in place).

8. Pour the descaler into the water tank up to the level A marked on the

9. Position an empty container of at least 2 litres capacity under the

symbol as a reminder that descaling needs to be carried

compartment on top of the machine);

(g. 16): then reposition both in the machine and press “Next”;

Empty the tank completely.

inside of the tank (which is equivalent to one 100ml pack), then add drinking water (one litre) up to level B (g. 59). Reposition the water tank (with lid) on the machine and press “Next”

spouts (g. 60). Press “Done” to start the procedure (or "Back" to go back to the previous screen, or "X" to abort and exit the procedure, but in this instance remembering to remove the descaler solution from the water tank).

;

Important! Danger of scalding

Hot water containing acid ows out of the spouts. Accordingly, take care to avoid contact with this solution.

10. The descale programme starts and the descaler liquid comes out of the hot water spout and the coee spout; a succession of rinses is performed automatically at set intervals to remove all the scale residues inside the coee machine;

After about 20 minutes, the descaling action ceases;

11. The machine is now ready to be rinsed out with cold water. Empty the container used to collect the descaler solution. Remove and

MAX

empty the water tank, rinse thoroughly under running drinking water, then ll the tank with fresh water up to the MAX level (g.

61) and return it to the machine. Press "Next"

12. Having emptied the container used previously to collect the descaler solution, reposition it under the spouts and press "Yes" to start the rst rinse;

13. Hot water is released both from the hot water spout and from the coee spout;

14. When the water in the tank has run out, empty the container used to collect the rinsing water;

15. Take out the water tank and reposition the water softener lter, if removed previously. Press "Next" to continue;

16. Fill the tank with fresh water to the MAX level, and return it to the machine;

17. Having emptied the container used previously to collect the descaler solution, reposition it under the spouts

and press "Yes" to start

another rinsing cycle;

18. When the water in the tank has run out, empty the container used to collect the rinsing water, then remove the drip tray and the grounds container, empty them and return them to the machine;

19. Detach the water tank, top up to the max level, return it to the ma

chine and press "Next";

20. The descaling procedure is now complete: press "Ok";

21. The machine performs a rapid preheat cycle and then goes back to the homepage.

Please note:

• If the descaling cycle is not completed correctly (e.g. electrical power failure) it is advisable to repeat the procedure;

• Water may nd its way into the grounds container during the rinse procedure: this is quite normal.

• If the water tank has not been relled to the MAX level, the machine prompts for a third rinse to ensure that the descaler solution has been completely eliminated from the internal circuits. Before starting the rinse, remember to empty the drip tray.

Rivelia

Water softener ﬁlter

To ensure the performance of the machine remains constant over time, the use of a De’Longhi water softener lter is recommended. For further information, visit www.delonghi.com.

EAN: 8004399327252

0,5 L

To ensure correct use of the lter, proceed as follows:

Installing the ﬁlter

1. Press on the homepage;

2. Scroll through the pages until the item "Water lter” is displayed;

3. Press "Yes" to enter the guided procedure

4. Remove the lter from the packaging and turn the date indicator to view the next 2 months (g. 62);

Please note:

The lter lasts about two months assuming normal use of the machine; if on the other hand the machine remains idle with the lter installed, it will not last more than three weeks, at most.

5. Press "Next" to continue ("Back" to go back to the previous screen);

6. To activate the lter, run tap water through the hole in the centre of the lter until water comes out of the openings at the side for more than a minute (g. 63). Press “Next”, “Back” or “X”;

7. Remove the water tank from the machine and ll with drinking water; insert the lter in the water tank, immersing the bottom part and squeezing the middle of the element 2-3 so that the air bubbles can escape (g. 64). Press "Next";

8. Finally, locate the lter in the special hous home;

press “Next”

9. Return the tank to the machine and press "Yes";

10. Position an empty container of at least 0.5 litres capacity under the hot water spout and press “Yes”.

11. The machine delivers hot water, then stops automatically. Press “OK” to go back to the homepage;

12. The lter is now active and the machine can be used.

. Close the water tank with the lid;

ing (g. 65) and push fully

Replacing or removing the ﬁlter

Replace the lter when the corresponding message appears on the homepage: to proceed with replacement of the lter straight away, press “Ok” and follow the instructions from point 3 of the previous heading. To delay replacing the lter until later, press "Cancel": the display continues to show the symbol as a reminder that the lter needs replacing. To replace, proceed as follows:

1. Press on the homepage;

2. Scroll through the pages until the item "Water lter” is displayed: press “Read more”;

3. Press "Yes" to enter the guided procedure;

4. Remove the water tank and the spent lter: press "Ok".

5. To remove the lter, press "Ok" ("Back" to go back to the previous screen; "X" to cancel the operation);

6. To replace the lter, press “Yes”. Follow the steps described in the previous heading, proceeding from point (4).

Please note:

After two months (see date indicator), or after 3 weeks if the machine has not been used, the lter should be replaced even if the warning message has not yet been displayed.

Rivelia

Frequent and alarm messages

Time to ll the water tank with fresh

water and then insert it.

Can you empty the drip tray and the

grounds container? Fill water tank with

fresh water and then insert it.

Can you insert the unità di

erogazione? ???

• Insucient water in the tank

Remove the tank (ﬁg. 3), ﬁll the tank with fresh drinking water up to the MAX level (ﬁg. 4), and return it to the machine

• Tank not correctly in place

Fit the tank correctly

• There is not enough water in the tank to make a drink, and the machine will soon be asking for the grounds container to be emptied

The machine asks for both operations to be done straight away so that multiple drinks can be prepared, without interruption

• Unità di erogazione ??? not reﬁtted after cleaning.

Fit the brewing unit as described in section “Removable brewing unit”

Time to empty the grounds container and the drip tray. Even if not full, it is

important to clear them out regularly

• The grounds container is full.

Clean as described in heading

“Coee grounds container”

Empty the grounds container and drip tray.

Once done, if you still see this message,

ensure the side door is closed.

• Grounds container and/or drip

• Side ﬂap missing or not

tray not correctly in place or missing completely.

Grounds container and/or the drip tray not correctly in place or missing completely.

correctly in place.

Position the ﬂap or ensure it is properly shut. Empty the grounds container so the machine can continue counting correctly.

Are you sure you have the added

pre-ground coffee?

Add it now One scoop only!

Oops! it looks like you’re out of

coffee beans. Time to add some

more.

• Preparation of a drink using pre-ground coee has been selected, but the amount of pre-ground coee inserted is not sucient

Check that the funnel is not blocked, then add one level scoop of pre-ground coee, press "Ok" on the display and follow the instructions in heading “Preparation with pre-ground

coee”.

• Coee beans have run out.

Fill the bean hopper and press "Done".

The new settings have not been

saved

• In the course of customizing a drink (see section preparation has been deliberately interrupted by pressing "X", or an alarm has been tripped.

Press "OK" to go back to the homepage (C) and view the alarm that has caused the interruption. Follow the instructions corresponding to the alarm displayed (see section

“Frequent and alarm messages”)

““My” function”)

Just doing a little cleaning.

I’ll be back in a few seconds

I am unable to complete your drink.

Please reduce the pre-ground coffee

quantity and try again

• The machine has detected impurities in its internal circuits.

Wait until the machine is ready for use again and reselect the required drink. Contact an authorized Service Centre if the problem persists.

• Too much pre-ground coee has been used

Reduce the amount of preground coee (1 scoop, max). Press “Ok” to go back to the homepage

• If the water softener ﬁlter is present, an air bubble may have been released inside the circuit, obstructing delivery.

Press "Ok" and release a little water (see section “Hot water”) until the ﬂow is regular. If the problem persists, remove the ﬁlter (see section “Replacing or

removing the lter”)

I am unable to complete your drink. Please

• Too much pre-ground coee

reduce the pre-ground quantity, empty the

grounds container and try again

• The beans are too ﬁnely ground,

Sorry, I am unable to complete your

drink. Increase the grind setting by

1 (+1).

• Too much coee has been used.

Sorry, I am unable to complete your

drink. Please reduce the intensity

and try again

has been used

Reduce the amount of preground coee (1 scoop, max). Carry out the cleaning procedure as described in section . “Coee grounds container”

so that the coee is delivered too slowly or not at all.

Press "Ok", “Next” and proceed to adjust the coee grinder as appropriate (see heading “Coee

grinder settings”).

Select a milder “intensity” (see “customised coee-based drinks”) Press “Ok” to go back to the homepage.

Remember to store the milk carafe

in the fridge

• A milk-based drink has been prepared and the milk carafe is still on the machine

Remove the milk carafe and put it in the refrigerator.

A descale is needed.

Ready to start?

(~ 30 min)

Cancel

Oops, the process has been interrupted

The water lter needs to be replaced.

Ready to start?

Yes

• Indicates that the machine needs descaling.

To proceed with descaling, press “Yes” and follow the guided procedure, otherwise press "Cancel": in this case the homepage continues to display

symbol as a reminder

the that descaling is required (see section “Descaling”).

• Descaling interrupted or not completed correctly

Press Ok to continue (see section “Descaling”).

• Water softener ﬁlter spent.

Press “Yes” to replace the ﬁlter, or “Cancel” if the intention is to replace it later. Follow the instructions in section “Replacing or

removing the lter”.

Cancel

Something’s not right: can you refer to

the user manual please?

Yes

• The inside of the machine is very dirty.

Clean the inside of the machine thoroughly, as described in the section “Description of the machine”. If the message is still displayed after cleaning, contact De’Longhi Customer Services and/or an approved Service Centre

MAX

The water circuit is out of water.

Ready to rell?

Yes

• The water circuit is empty

Press "Yes" to ﬁll the circuit: the ﬂow of water will stop automatically. If the problem persists, make sure the water tank is correctly in place.

• A new water softener ﬁlter has been ﬁtted

Make sure the instructions for installing the new ﬁlter have been followed correctly (section

“Installing the lter” and “Replacing or removing the lter”).

If the problem

persists, remove the ﬁlter.

Prepare at least 3 coffees before

changing again

drinks before an adjustment can be changed using “Bean Adapt”

Make at least 3 coees, then proceed with the adjustment/ tuning.

• Reminder that the ﬁlter must be replaced

Replace the ﬁlter, or remove it, as described in section “Replacing

or removing the lter”.

• Reminder that the machine must be descaled.

The descaling procedure needs to be carried out without delay, see section . “Descaling”

• Reminder that the milk carafe needs to be cleaned.

See section Cleaning the milk carafe after use

• The machine needs to brew 3

•

Indicates that energy saving is activated.

To deactivate energy saving, proceed as described in section “General”.

Rivelia

FAQ

• Diculty removing the water tank

Tilt the tank away from the machine: once released, it will

detach easily.

• Steam comes out of the top after delivering coee

MAX

This is water vapour that escapes from the dose of coee utilized

and is released automatically by way of the grounds container.

This happens as part of normal and correct operation.

• Diculty ﬁtting the bean hopper

MAX

Make sure that the bean hopper socket is clean and free of loose

beans: use the brush to remove any residual traces of coee.

MAX

Locate the bean hopper in the socket, being sure to align the

unlock position

MAX

with the notch on the machine

Twist the bean hopper clockwise to the point at which the lock

position

aligns with the notch on the machine

MAX

• Coee not hot (1)

Americano

It has been 2-3 minutes since the last preparation and the

internal circuit of the machine has cooled down: in this situation,

a hot rinse is advisable.

On the homepage, press

Espresso Coffee

Espresso

lungo

Scroll through the pages until the item “Rinse” is displayed and

press “Yes” to start the procedure: after a few seconds, hot water

will begin ﬂowing to clean and heat up the internal circuit of the

Rinsing

to enter the settings menu:

machine.

Yes

⇢

• Coee not hot (2)

Americano

The temperature set for preparation of the coee is too low.

Select a higher temperature as indicated below:

on the homepage, press to enter the settings menu:

Espresso Coffee

Espresso

lungo

Scroll through the pages until the item “Coee temperature” is

displayed and press “Set” to change the temperature.

Coee temperature

Set

Select a higher temperature (Medium or Max).

• Coee not hot (3)

Descaling is required: proceed as illustrated in sectionDescaling.

This done, check that the water hardness setting is right for the

water provided by your local supplier (see Check the hardness of the water

and Setting water hardness).

• Milk presents large bubbles, or splashes from the milk spout, or is under-frothed (1).

Cow's milk

Whole (fat >3,5%)

Semi-skimmed (fat between 1.5 and 1.8%)

Skimmed (fat <0.5%)

Vegetable drinks

✓

Soya

Almond

Oatmeal

✓

Use cow’s milk or vegetable drinks at refrigerator temperature

(about 5° C).

If the result is still not as expected, try changing the brand of

milk.

In the case of vegetable drinks, use “Barista” versions for best

results.

• Milk presents large bubbles, or splashes from the milk spout, or is under-frothed (2).

Clean the lid of the milk carafe thoroughly, as indicated in sections “Cleaning the milk carafe after use” and “Cleaning the milk carafe”.

57132C8962_00_0124

DeLonghi EXAM44055G, EXAM44055B, EXAM44055W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Description of the machine

Description of panel and homepage

Description of the accessories

Description of milk carafe

Select your language

Select the day and time

Fill the water tank

Prepare the machine

Fit the bean hopper

Tips

Check the hardness of the water

Setting water hardness

Tutorial

Turning the machine on

Menu settings

Rinsing

Descaling

General

Support

Grind & Empty

Cleaning the milk carafe

Statistics

Languages

Day and time

Water hardness

Empty circuit

Default values

Directly selected drinks

Extra shot

Bean adapt technology

Coffee Routine

Preparing the milk carafe

Which milk to use?

Filling and attaching the milk carafe

Adjusting the amount of froth

Making milk-based drinks

Cleaning the milk carafe after use

Making “To Go” beverages

Cleaning the De’Longhi travel mug (sold separately) every time after use

Hot water

“My” function

Grind & Empty (Run a grinding cycle without preparing any drink, to empty the grinder of its contents)

You can now switch the bean hopper

Cleaning the machine

Internal circuit of the machine

Bean hopper

Drip tray and drip tray grille

Inside of the machine

Water tank

Removable brewing unit

Thorough cleaning of milk carafe

Descaling

Frequent and alarm messages