Dell UP2716DA User Manual
Dell UltraSharp
UP2716DA
User’s Guide
Model:UP2716DA
Regulatory model: UP2716Dt
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if
instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright © 2020 Dell Inc. All rights reserved. This product is protected by U.S. and international
copyright and intellectual property laws.
Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions.
All other marks and names mentioned herein may be trademarks of their respective companies.
2020 – 11 Rev. A00
Contents
About Your Monitor ..................................... 5
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Monitor Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LCD Monitor Quality and Pixel Policy. . . . . . . . . . . . . . . . . . . . . . 20
Setting Up the Monitor.................................. 21
Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using the Tilt, Swivel, and Vertical Extension . . . . . . . . . . . . . . . . . 24
Adjusting the Rotation Display Settings of Your System . . . . . . . . . . 25
Connecting Your Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Organizing Your Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing the Monitor Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Operating the Monitor ..................................30
Turning on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using the Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . . . . . . . . 33
Troubleshooting ....................................... 51
Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Contents | 3
Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Appendix .............................................. 57
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
FCC Notices (U.S. only) and Other Regulatory Information . . . . . . . . 57
Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
EU product database for energy label and product information sheet . . 57
Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4 | Contents
About Your Monitor
Package Contents
Your monitor ships with the components shown below. Make sure that you have
received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Somefeatures or media may not be available in certain countries.
Monitor
Stand riser
Stand base
Power cable (varies by country)
About Your Monitor | 5
USB 3.0 upstream cable (enables
the USB ports on the monitor)
DP cable (mDP to DP)
• Quick Setup Guide
• Safety and Regulatory Information
• Factory Calibration Report
Product Features
The Dell UltraSharp UP2716DA monitor has an active matrix, thinfilm transistor (TFT),
liquid crystal display (LCD), and LED backlight. The monitor features include:
• 68.47 cm (27-inch) active area display (Measured diagonally) 2560 x 1440
resolution, plus full-screen support for lower resolutions.
• Tilt, swivel, pivot and vertical extension adjustment capabilities.
• Removable pedestal and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier
set up with an elegant viewing experience.
• Extensive digital connectivity with DP, mDP, HDMI, and USB 3.0 helps future-proof
your monitor.
• High Dynamic Contrast Ratio (2,000,000:1) .
• Supports major industry standards: 100% AdobeRGB, 100% sRGB, 100% REC709,
98% DCI-P3.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Security lock slot.
• Asset Management Capability.
• RoHS compliant.
• BFR/PVC Free monitor (excluding cables).
• TCO Certified Displays.
• Arsenic-Free glass and Mercury Free for Panel only.
• ≤ 0.3 W in Standby Mode.
• Energy Gauge shows the energy level being consumed by the monitor in real time.
6 | About Your Monitor
Identifying Parts and Controls
Front view
Front view
Front panel controls
Label Description
1 Function buttons (For more information, see Operating the Monitor)
2 Power on/off button (with LED indicator)
Solid white light indicates the monitor is turned on and functioning normally.
Blinking white light indicates the monitor is in Standby Mode.
About Your Monitor | 7
Back View
Label Description Use
1 VESA mountiong holes (100 mm
x 100 mm-behind attached VESA
cover)
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Security lock slot Secures monitor with security cable lock
5 Barcode, serial number, and Service
Tag label
6 Dell soundbar mounting slots Attaches the optional Dell soundbar.
7 Cable management slot Use to organize cables by placing them
Wall mount monitor using VESAcompatible wall mount kit (100 mm x 100
mm).
(sold separately).
Refer to this label if you need to contact
Dell for technical support.
NOTE: Please remove the plastic strip
covering the mounting slots before affixing
the Dell Soundbar.
Dell soundbar is sold separately.
through the slot.
8 | About Your Monitor
Side View
Bottom View
USB downstream port
Port with lightning icon is for BC 1.2
Label Description Use
1 AC power connector To connect the monitor power cable.
2a HDMI 1 connector
2b HDMI 2 connector
3 DP connector (in) Connect your computer with DP cable.
4 mDP connector (in) Connect your computer with mDP to DP cable.
5 DP connector (out) DP output for MST (multi-stream transport) capable
Connect your computer with HDMI cable devices .
monitor. DP 1.1 monitor can only be connected as
the last monitor in the MST chain. To enable MST,
refer to instruction on section “Connecting the
Monitor for DP MST Function”.
NOTE: Remove the rubber plug when use DP out
connector.
About Your Monitor | 9
6 Audio line-out port Connect speakers to playback audio coming
through HDMI or DP audio channels.
Only supports 2-channel audio.
NOTE: The audio line-out port does not support
headphones.
WARNING: Excessive sound pressure from
earphones or headphones can cause hearing
damage or loss.
7a USB upstream 1 port Connect the USB cable that comes with your
monitor to the computer. Once this cable is
7b USB upstream 2 port
8 USB downstream ports (2) Connect your USB device. You can only use this
9 Stand lock Lock the stand to the monitor using a M3 x 6 mm
connected, you can use the USB downstream
connectors on the monitor.
connector after you have connected the USB cable
to the computer and USB upstream connector on
the monitor.
screw (screw not included).
Monitor Specifications
Flat Panel Specifications
Model
Screen type Active matrix - TFT LCD
Panel type In-plane switching (IPS)
Viewable image:
Diagonal 68.47 cm (27 inches)
Active Area:
Horizontal 596.74 mm (23.49 inches)
Vertical 335.66 mm (13.21 inches)
Area 200301.75 mm
(310.47 inches2)
Pixel pitch 0.2331 mm x 0.2331 mm
Viewing angle:
Horizontal 178° (typical)
Vertical 178° (typical)
Luminance output 300 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
2,000,000 to 1
(dynamic contrast on)
Faceplate coating Anti-glare treatment of the front polarizer (3H)
2
10 | About Your Monitor
Backlight LED
(kHz)
Vertical)
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 1200
Response Time 14 ms (typical),
6 ms (fast mode)
Color depth 1.07 Billion colors
Color gamut 100% AdobeRGB
100% sRGB
100% REC709
98% DCI-P3
Resolution Specifications
Horizontal scan range 30 kHz to 88 kHz
Vertical scan range 50 Hz to 75 Hz
Maximum preset resolution 2560 x 1440 at 60 Hz
Video display capabilities
(DP & HDMI playback)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, QHD
Preset Display Modes
Horizontal
Display Mode
720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/VESA, 640 x 480 37.5 75.0 31.5 -/VESA, 800 x 600 37.9 60.0 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1920 x 1080 67.5 60.0 148.5 +/+
VESA, 2048 x 1080 26.27 24 58.22 +/-
VESA, 2048 x 1080 66.58 60 147.16 +/VESA, 2560 x 1440 88.8 60.0 241.5 +/-
Frequency
64.0 60.0 108.0 +/+
80.0 75.0 135.0 +/+
75.0 60.0 162.0 +/+
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
About Your Monitor | 11
MST Multi-Stream Transport (MST) Modes
MST Source Monitor Maximum number of external monitor that can be
supported
2560 x 1440/60 Hz 1920 x 1200/60 Hz 1920 x 1080/60 Hz
2560 x 1440/60 Hz 1 2 2
NOTE: Maximum external monitor resolution supported is 2560x1440 60Hz only.
Electrical Specifications
Video input signals • Digital video signal for each dierential line.
Per dierential line at 100 ohm impedance.
• DP/HDMI signal input support
Input voltage/ frequency/
current
Inrush current 120 V: 30 A (Max.)
Power Consumption 0.3 W (Off Mode)
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.6 A (maximum)
240 V: 60 A (Max.)
1
0.3 W (Standby Mode)
30.5 W (On Mode)
130 W (Max)
28.2 W (Pon)
2
3
89.3 kWh (TEC)
1
1
3
1
As dened in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB ports.
3
Pon: Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
12 | About Your Monitor
Physical Characteristics
Model
Connector type • DP (HDCP 1.4) connector (include DP in
and DP out)
• mDP (HDCP 1.4) connector
• HDMI 1/HDMI 2 (HDCP 1.4) connector
• Audio line-out
• USB 3.0 update stream port connector.
• USB 3.0 down stream port connector x 4.
(Port with lightning icon is for BC
1.2)
Signal cable type
Dimensions (with stand)
Height (extended) 540.3 mm (21.27 inches)
Height (compressed) 410.3 mm (16.15 inches)
Width 611.4 mm (24.07 inches)
Depth 200.3 mm (7.89 inches)
Dimensions (without stand)
Height 362.5 mm (14.27 inches)
Width 611.4 mm (24.07 inches)
Depth 51.4 mm (2.02 inches)
Stand dimensions
Height (extended) 433.4 mm (17.06 inches)
Height (compressed) 387.2 mm(15.24 inches)
Width 292.4 mm (11.51 inches)
Depth
Weight
Weight with packaging 9.52 kg (20.99 lb)
Weight with stand assembly and cables 7.42 kg (16.36 lb)
Weight without stand assembly (For wall
mount or VESA mount considerations - no
cables)
Weight of stand assembly 2.55 kg (5.62 lb)
Front frame gloss 5.5 ± 1.5 GU
mDP to DP 1.8 M cable.
USB 3.0 1.8 M cable.
200.3 mm (7.89 inches)
4.56 kg (10.05 lb)
About Your Monitor | 13
Environmental Characteristics
Model
Temperature:
Operating 0°C to 35°C (32°F to 95°F)
Non-operating –20°C to 60°C (–4°F to 140°F)
Humidity:
Operating 10% to 80% (non-condensing)
Non-operating
Altitude:
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal
dissipation
5% to 90% (non-condensing)
443.7 BTU/hour (maximum)
104.07 BTU/hour (On Mode)
14 | About Your Monitor
Pin Assignments
DP connector (in)
Pin number 20-pin side of theconnected signal cable
1 ML3(n)
2 GND
3 ML3(p)
4 ML2(n)
5 GND
6 ML2(p)
7 ML1(u)
8 GND
9 ML1(p)
10 ML0(n)
11 GND
12 ML0(p)
13 CONFIG1
14 CONFIG2
15 AUX CH (p)
16 GND
17 AUX CH (n)
18 Hot Plug Detect
19 Return
20 DP_PWR
About Your Monitor | 15
DP connector (out)
Pin number 20-pin side of theconnected signal cable
1 ML0(p)
2 GND
3 ML0(n)
4 ML1(p)
5 GND
6 ML1(n)
7 ML2(p)
8 GND
9 ML2(n)
10 ML3(p)
11 GND
12 ML3(n)
13 CONFIG1
14 CONFIG2
15 AUX CH(p)
16 GND
17 AUX CH(n)
18 Hot Plug Detect
19 Return
20 DP_PWR
16 | About Your Monitor
mDP connector
Pin number 20-pin side of theconnected signal cable
1 GND
2 Hot Plug Detect
3 ML3 (n)
4 CONFIG1
5 ML3 (p)
6 CONFIG2
7 GND
8 GND
9 ML2 (n)
10 ML0 (p)
11 ML2 (p)
12 ML0 (p)
13 GND
14 GND
15 ML1 (n)
16 AUX (p)
17 ML1 (p)
18 AUX (n)
19 GND
20 DP_PWR
About Your Monitor | 17
HDMI connector
Pin number 19-pin side of theconnected signal cable
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5 V POWER
19 HOT PLUG DETECT
18 | About Your Monitor
Loading...