Dell U4320Q User Manual

User
SOP 8P
SO8
SOIC 8P
U1202,U120
Non-volatile memory, 2k bit.
No
Part place on Interface Board,
IC EEPROM
U1902
Non-volatile EEPROM 16Kbit.
No
Part place on Interface Board,
IC SDRAM
U801,
Volatile memory 2Gbit
No
Part place on Interface Board,
Statement of Volatility – Dell U4320Q
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
The Dell U4320Q contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the U4320Q system board.
Description
IC FLASH MX25L6433 FM2J-08G SOP 8P
IC FLASH MX25L8006 EM1I-12G
IC EEPROM M24256­BRMN6TP
IC EEPROM GT24C02A­2GLI-TR
GT24C16A­2GLI-TR SOIC 8P
Reference Designator
Volatility Description
U301 Non-volatile Flash memory,
64M bit. To store firmware.
U1308 Non-volatile Flash memory,
PD
8M bit. To store
firmware.
U302 Non-volatile memory,
256Kbit, To store Scaler data.
3
To store HDMI EDID,
To
ISP function
Accessibl e for external data
Remedial Action (Action necessary to prevent loss of data)
No Part place on Interface Board,
it has hardware/software write protected.
No Part place on Interface Board,
it has hardware/software write protected.
No Part place on Interface Board,
it has hardware/software write protected.
it has hard protected.
it has hard
ware/software write
ware write protected.
DDR3 W632GG6NB 09J 2GBIT BGA96P
CAUTION: All other components on the system board lose data if power is removed from the system. Primary power loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3, 1067 MHz). Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration and time-of-day information.
Nov 2019
U802,U803,U 804
(128Mx16). To store video data stream and firmware code.
Loading...