Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.
Microsoft
Microsoft Corporation in the United States and/or other countries. SUSE
of Novell Inc. in the United States and other countries.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
February 2011Rev. A01
®
, Windows®, and Windows Server® are either trademarks or registered trademarks of
The Dell PowerVault Modular Disk (MD) storage arrays provide an industry
standard application programming interface (API) called the Storage
Management Initiative Specification (SMI-S). This interface enables third
party SMI-S client applications to manage MD storage arrays in a multi-vendor
storage area network (SAN) environment.
SMI-enabled management applications are known as CIM clients. To allow
clients to manage a storage device, an SMI-S Provider (also called SMI-S
Agent or CIM Agent) is required. SMI-S Providers can be implemented as:
•A proxy interface that translates the existing API of a device to an SMI-S
compliant interface. This implementation is the quickest path to SMI-S
compliance, but a proxy provider and a Common Information Model
Object Manager (CIMOM) must be installed on a server. A CIMOM is a
CIM/WBEM infrastructure that receives, validates, and authenticates
CIM requests from the client application. The CIMOM directs the
requests to the appropriate device provider.
•A native feature of the storage device API. This implementation is
sometimes referred to as an
Dell MD SMI-S Provider is implemented as a proxy interface. The Dell
SMI-S Provider, referred to as SMI-S Provider, runs on a server on the storage
network. OpenPegasus CIMOM is installed during the installation of this
SMI-S Provider.
The SMI-S Provider provides the SMI-S interface to the Dell PowerVault
Modular Disk storage array family. The provider uses the proxy CIM Agent
model and is supported on Microsoft Windows and Linux platforms only. For
more information about the platform versions, see the Support Matrix for the
MD storage arrays at support.dell.com/manuals.
embedded agent
.
Introduction5
Version Information
Table 1-1 lists the version details of the components.
Table 1-1.Version Information
ComponentVersion
SMI-S1.4
SMI-S Provider10.15
OpenPegasus CIMOM2.9.1
Supported Profiles and Sub-Profiles
SMI-S Provider version 10.15 supports the following profiles and sub-profiles:
•Physical package
•Profile registration
•Device credentials
•Proxy server system management
•Multiple computer system
•Block services
•Disk drive lite
•Copy services
•Job control
•Extent composition
•Disk sparing
•Initiator port (SAS and SATA)
•Target port (SAS)
•iSCSI target port
•Access points
•Indications
•Masking and mapping
•Location
•Software inventory
•Software update
6Introduction
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.