Dell SE2419HX, SE2719HX, SE2719H, SE2419H User Manual

Dell SE2419H/SE2419HX/
SE2719H/SE2719HX
User’s Guide
Monitor Model: SE2419H/SE2419HX/SE2719H/SE2719HX
Regulatory model: SE2419Hf, SE2719Hf
Notes, Cautions and Warnings
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks
are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
2018 – 09
Rev. A01
Contents
About your monitor 5
Package contents
Product features
Identifying features and controls
Monitor specifications
Plug and play capability
LCD monitor quality and pixel policy
Maintenance guidelines
Setting up the monitor
Connecting the stand
Connecting your monitor
Organizing cables
Removing the stand
........................ .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
..................... .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
20
21
10
17
17
17
18
18
21
5
6
7
Operating your monitor
Turning on the monitor
Using the front panel controls
.................... .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
Using the On-Screen Display (OSD) menu
Setting up your monitor
Using tilt
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . .
Contents
23
23
23
25
47
49
|
3
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . .
50
Self-test
Built-in diagnostics
Common problems
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Product-specific problems
Appendix
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC notices (U.S. Only) and other regulatory information
Contacting Dell
Pin assignments
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . .
50
52
53
55
56
56
56
57
4
|
Contents

About your monitor

Package contents

Your monitor ships with the components indicated in the table. Ensure that you have received all the components and see Contacting Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some features may not be available in certain countries.
NOTE: To set up with any other stand, see the documentation that shipped with the stand.
Monitor
Stand riser
Stand base
Power cable (varies by country)
VGA cable (SE2419H and SE2719H)
About your monitor |
5
HDMI cable (SE2419HX and SE2719HX)
Quick Setup Guide
Safety and Regulatory Information

Product features

The Dell SE2419H/SE2419HX/SE2719H/SE2719HX at panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include:
SE2419H/SE2419HX: 60.45 area display (measured diagonally). 1920 x 1080 resolution, with full-screen support for lower resolutions. SE2719H/SE2719HX: 68.58 cm (27 inch) diagonal viewable area display (measured diagonally). 1920 x 1080 resolution, with full-screen support for lower resolutions. Wide viewing angles of 178 degrees in vertical and horizontal directions.
High dynamic contrast ratio (8,000,000:1).
HDMI connectivity makes it simple and easy to connect with legacy and new systems. Plug and play capable if supported by your computer On-Screen Display (OSD) adjustments is to easy setup and
0.5 W standby power when in the sleep mode. Optimize eye comfort with a flicker-free screen.
Possible long-term effects if blue light emission from the monitor may cause damage to the eyes, including eye fatigue or digital eye strain. ComfortView feature is designed to reduce the amount of blue light emitted from the monitor to help optimize eye comfort.
Security-lock slot.
Arsenic-free glass and mercury-free panel.
BFR/PVC-Reduced (the circuit boards inside your monitor are made using BFR/ PVC-free laminates).
RoHS Compliant.
Energy Saver feature for Energy Star compliance.
cm (23.8 inch) diagonal viewable
optimize screen.
6 | About your monitor

Identifying features and controls

Front view
1
Label Description Use
1 Function buttons
Power On/Off button
2
(with LED indicator)
To access the OSD menu and change the settings if required. (For more
information, see Using the front panel
controls)
To turn the monitor On or Off.
2
About your m | r otino 7
Back view
5
321
4
Without monitor stand
Label Description Use
1 Security-lock slot
2 Regulatory label, barcode, serial
number, and Service Tag label
3 Regulatory information (engraved)
4 Cable- management slot
5 Stand release button
To secure the monitor using a security lock (purchased separately).
List the regulatory approvals. See this label if you need to contact Dell for technical support. The Service Tag is a
enables Dell service technicians to identify the hardware components in your computer and access warranty information.
List the regulatory approvals.
To organize the cables.
Release stand from monitor.
With monitor stand
Side view
8 | About your monitor
Bottom view, without monitor stand
1
2 3
SE2419H/SE2419HX/SE2719H/SE2719HX
Label Description Use
1 Power port To connect the monitor power cable.
2
3
HDMI port
VGA port
For connection to your computer using HDMI cable.
For connection to your computer using VGA cable.
About your monitor | 9
Monitor specications
Model
SE2419H/SE2419HX
SE2719H/SE2719HX
Screen type Active matrix-TFT LCD
Panel type In-Plane Switching
Viewable area
Diagonal
604.70 mm (23.81 in. )
686.00 mm (27 in. )
Active area:
Horizontal
Vertical
Area
Pixel pitch
527.04 mm (20.75 in.)
296.46 mm (11.67 in.)
1562.46 cm2 (242.15 in.
0.2745 mm
597.89 mm (23.54 in. )
336.31 mm (13.24 in.)
2
)
2010.76 cm
0.3114 mm
2
(311.67 in.2 )
Pixel per inch (PPI) 92 81 Viewing angle:
Vertical Horizontal
Brightness 250 cd/m (typical) 300 cd/m (typical)
Contrast ratio
178° (typical) 178° (typical)
22
1,000 to 1 (typical) 8,000,000 to 1 (Dynamic Contrast)
Faceplate coating Anti-glare with 3H hardness
Backlight LED edgelight system
Response time (Gray to Gray): Normal mode Fast mode
8 ms 5 ms
Color depth 16.7 million colors
Color gamut CIE 1931 (72%)
Dell display manager
Yes
compatibility
Connectivity
One VGA port and one HDMI 1.4 (HDCP 1.4) port with SE2419H/SE2419HX/SE2719H/SE2719HX monitors.
Bezel width (edge of monitor to active area)
6.2 mm (Top)
6.2 mm (Left/Right)
20.5 mm (Bottom)
6.8 mm (Top)
6.8 mm (Left/Right)
21.1 mm (Bottom)
Security Security-lock slot for cable lock (optional purchase)
Tilt angle -5° to 21°
| About your monitor
10
Resolution specications
Model SE2419H/SE2419HX SE2719H/SE2719HX
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
Preset display modes
SE2419H/SE2419HX/SE2719H/SE2719HX
Display Mode Horizontal
Frequency
(kHz)
VESA, 720 x 400 31.5 70.1 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
VESA, 1920 x 1080 67.5 60.0 148.5 +/+
37.9
46.9
48.4
60.0
67.5 75.0 108.0 +/+
Vertical
Frequency
(Hz)
60.3 40.0 +/+
75.0 49.5 +/+
60.0 65.0 -/-
75.0 78.8 +/+
Pixel Clock
(MHz)
Sync Polarity (Horizontal /
Vertical)
About your monitor | 11
Electrical specications
Model SE2419H/SE2419HX
SE2719H/SE2719HX
Video input signals
Synchronization input signals
AC input voltage/ frequency/current
Inrush current
Analog RGB: 0.7 Volts 75 ohm input impedance HDMI 1.4 (HDCP 1.4), 600mV for each differential line, 100 ohm input impedance per differential pair
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
30A (120V AC Input) 60A (240V AC Input)
Physical characteristics
± 5 %,
Model
Signal cable type:
Analog Digital
Dimensions (with stand):
Height
Width 539.4 mm (21.24 in.)
Depth 152.8 mm (6.02 in.)
Dimensions (without stand):
Height
Width
Depth
SE2419H/SE2419HX SE2719H/SE2719HX
D-Sub (VGA), 15 pins; HDMI, 19 pins
SE2419H/SE2419HX SE2719H/SE2719HX
413.6 mm (16.28 in.)
SE2419H/SE2419HX
323.1 mm (12.72 in. )
539.4 mm (21.24 in. )
46.4 mm (1.83 in. )
454.2 mm (17.88 in. )
611.5 mm (24.07 in. )
186.8 mm (7.35 in.)
SE2719H/SE2719HX
364.2 mm (14.34 in.)
611.5 mm (24.07 in.)
46.4 mm (1.83 in.)
12 | About your monitor
Stand dimensions:
Height
Width
Depth
Weight: SE2419H/SE2419HX SE2719H / SE2719HX
With packaging
With stand assembly and cables 3.91 kg (8.62 lb) 5.09 kg (11.22 lb)
Without stand assembly and cables
Weight of stand assembly 0.52 kg (1.15 lb) 0.59 kg (1.30 lb)
SE2419H / SE2419HX
171.6 mm (6.76 in.)
249.0 mm (9.80 in.)
152.8 mm (6.02 in.)
5.59 kg (12.32 lb) 7.14 kg (15.74 lb)
3.13 kg (6.90 lb) 4.24 kg (9.35 lb)
SE2719H / SE2719HX
176.7 mm (6.96 in.)
257.2 mm (10.13 in.)
186.8 mm (7.35 in.)
Environmental characteristics
Model
Temperature:
Operating
Non-operating:
Storage Shipping
Humidity:
Operating 10% to 80% (non-condensing)
Non-operating:
Storage Shipping
Altitude:
Operating (maximum) 5,000 m (16,400 ft)
Non-operating (maximum)
Thermal dissipation
SE2419H/SE2419HX
0°C to 40°C (32°F to 104°F)
-20°C to 60°C (-4°F to 140°F)
-20°C to 60°C (-4°F to 140°F)
5% to 90% (non-condensing) 5% to 90% (non-condensing)
12,192 m (40,000 ft)
75.1 BTU/hour (maximum)
58.0 BTU/hour (typical)
SE2719H/SE2719HX
99.0 BTU/hour (maximum)
78.5 BTU/hour (typical)
About your monitor | 13
Power management modes
If you have VESA's DPM compliance graphic cards or software installed on your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature.
Zero power consumption in o mode can only be achieved by disconnecting the
*
power cable from the monitor.
SE2419H/SE2419HX
VESA
modes
Normal operation
mode
PON 17.1 W
ETEC 54.15 kWh
Horizontal sync Vertical sync Video Power
Active Active Active White 22 W (maximum)
Inactive Inactive Blanked White
-
Energy star Power consumption
SE2719H/SE2719HX
VESA
modes
Normal operation
mode
PON 20.3 W
ETEC 64.05 kWh
Horizontal sync Vertical sync Video Power
Active Active Active White
Inactive Inactive Blanked White
-
Energy star Power consumption
indicator
(Glowing)
indicator
(Glowing)
Power consumption
17 W (typical)
Less than 0.5 W
Power consumption
29 W (maximum) 23 W (typical)
Less than 0.5 W
14
|
About your monitor
NOTE:
PON: Power consumption of on mode as defined in Energy Star.
E
: Total energy consumption in kWh as defined in Energy Star.
TEC
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:
SE2419H
Dell 24 Monitor
?
No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2419H
SE2419H
SE2419HX
Dell 24 Monitor
?
No HDMI Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2419HX
SE2419HX
About your monitor
|
15
SE2719H
Dell 27 Monitor
?
No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2719H
SE2719H
SE2719HX
Dell 27 Monitor
?
No HDMI Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2719HX
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR -certied.
SE2719HX
16
About your monitor
|

Plug and play capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see
Operating your monitor.

LCD monitor quality and pixel policy

During the LCD Monitor manufacturing process, it is normal for one or more to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at www.dell.com/support/monitors.
pixels

Maintenance guidelines

Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
CAUTION: Read and follow the Safety Instructions before cleaning the monitor.
For best practices, follow the instructions in the list below while unpacking, cleaning or handling your monitor:
To clean your screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the anti-static coating. Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
U se a lightly-dampened cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
I f you notice white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as the black-colored monitor may get scratched
To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.
About your monitor
|
17

Setting up the monitor

Connecting the stand

NOTE: The stand is not attached when the monitor is shipped from the factory.
NOTE: The following procedure is applicable for the stand that shipped with your monitor.
To attach the monitor stand:
1.
Connect the stand riser to the stand base, and then tighten the screw on the stand base.
Align the stand-riser bracket with the grooves at the back of the monitor.
2.
|
18
Setting up the monitor
Loading...
+ 40 hidden pages