Dell SE2219H, SE2219HX User Manual
Dell SE2219H/SE2219HX
User’s Guide
Monitor Model: SE2219H/SE2219HX
Regulatory Model: SE2219Hf
Notes, Cautions and Warnings
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright © 2018 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other
trademarks are of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
2020 - 12
Rev. A03
Contents
About your monitor ...........................................5
Package contents ..................................................... 5
Product features ....................................................... 6
Identifying features and controls ................................ 7
Monitor specifications ...............................................10
Pin assignments .......................................................15
Plug and play capability .............................................17
LCD monitor quality and pixel policy ...........................17
Maintenance guidelines .............................................17
Setting up the monitor .....................................18
Connecting the stand ................................................18
Connecting your monitor .......................................... 20
Organizing cables .....................................................21
Removing the stand ..................................................21
Operating your monitor ....................................23
Turning on the monitor ............................................. 23
Using the front panel controls ................................... 23
Using the On-Screen Display (OSD) menu .................. 25
Setting up display resolution on your monitor ............. 40
Using tilt ................................................................. 42
Contents │ 3
Troubleshooting ...............................................43
Self-test ................................................................. 43
Built-in diagnostics .................................................. 45
Common problems ................................................... 46
Product-specific problems ........................................ 48
Appendix .........................................................49
FCC Notices (U.S. Only) and Other Regulatory
Information ............................................................. 49
Contact Dell ............................................................ 49
EU product database for energy label and product
information sheet .................................................... 49
4 │ Contents
About your monitor
Package contents
Your monitor ships with the components indicated in the table. Ensure that you have received
all the components and see Contact Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: To set up with any other stand, see the documentation that shipped
with the stand.
Display
Stand riser
Stand base
Power cable (varies by country)
VGA cable (SE2219H)
About your monitor │ 5
HDMI cable (SE2219HX)
• Quick Start Guide
• Safety and Regulatory Information
Product features
The Dell SE2219H/SE2219HX at panel display has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight.
The monitor features include:
• SE2219H/SE2219HX: 54.61 cm (21.5 in.) diagonal viewable area display (measured
diagonally). 1920 x 1080 resolution, with full-screen support for lower resolutions.
• Wide viewing angles of 178 degrees in vertical and horizontal directions.
• High dynamic contrast ratio (8,000,000:1).
• HDMI connectivity makes it simple and easy to connect with legacy and new systems.
• Plug and play capable if supported by your computer.
• On-Screen Display (OSD) adjustments is to easy setup and screen optimization.
• ≤ 0.3 W in Standby Mode.
• Optimize eye comfort with a ficker-free screen.
• Possible long-term effects if blue light emission from the monitor may cause damage
to the eyes, including eye fatigue or digital eye strain. ComfortView feature is
designed to reduce the amount of blue light emitted from the monitor to help optimize
eye comfort.
• Security-lock slot.
• Arsenic-free glass and mercury-free panel.
• BFR/PVC-Reduced (the circuit boards inside your monitor are made using BFR/PVC-
free laminates).
• RoHS Compliant.
6 │ About your monitor
Identifying features and controls
Front view
1
Label Description Use
Function buttons To access the OSD menu and change the
1
Power On/Off button
2
(with LED indicator)
settings if required. For more information,
see Using the front panel controls.
To turn the monitor On or Off.
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.
2
About your monitor │ 7
Back view
Without monitor stand
With monitor stand
Label Description Use
Security-lock slot To secure the monitor using a security
1
2
3
4
5
Side view
Regulatory label, barcode, serial
number, and Service Tag label
Regulatory information (engraved) List of regulatory approvals.
Cable-management slot To organize the cables.
Stand release button Release stand from monitor.
lock (purchased separately).
List of regulatory approvals. See this
label if you need to contact Dell for
technical support. The Service Tag is
a unique alphanumeric identifier that
enables Dell service technicians to
identify the hardware components in
your computer and access warranty
information.
8 │ About your monitor
Bottom view, without monitor stand
SE2219H/SE2219HX
Label Description Use
Power port To connect the monitor power cable.
1
2
3
HDMI port
VGA port
For connecting the monitor to your computer using
HDMI cable.
For connecting the monitor to your computer using
VGA cable.
About your monitor │ 9
Monitor specifications
Description Values
Screen type Active matrix-TFT LCD
Panel type In-Plane Switching
Viewable area
Diagonal 546.10 mm (21.50 in.)
Active area:
Horizontal
Vertical
Area
Pixel pitch 0.24795 mm
Pixel per inch (PPI) 102
Viewing angle:
Horizontal
Vertical
Brightness 250 cd/m2 (typical)
Contrast ratio 1,000 to 1 (typical)
Faceplate coating Anti-glare with 3H hardness
Backlight LED light bar system
Response time (Gray to Gray):
Normal mode
Fast mode
Color depth 16.7 million colors
Color gamut CIE 1931 (72%)
Dell display manager
compatibility
Connectivity One VGA port and one HDMI 1.4 (HDCP 1.4) port with
Bezel width (edge of monitor
to active area)
Security Security-lock slot for cable lock (optional purchase)
Tilt angle -5° to 21°
476.06 mm (18.74 in.)
267.79 mm (10.54 in.)
1274.84 cm2 (197.52 in.2)
178° (typical)
178° (typical)
8,000,000 to 1 (Dynamic Contrast)
8 ms
5 ms
Yes
SE2219H/SE2219HX monitors.
- Top: 6.4 mm (0.25 in.)
- Left/Right: 6.4 mm (0.25 in.)
- Bottom: 20.5 mm (0.81 in.)
10 │ About your monitor
Resolution specifications
Description Values
Horizontal scan range
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
30 kHz to 83 kHz (automatic)
Preset display modes
SE2219H/SE2219HX
Display mode Horizontal
frequency
(kHz)
VESA, 720 x 400 31.5 70.1 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/VESA, 640 x 480 37. 5 75.0 31.5 -/VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x1024 64.0 60.0 108.0 +/+
VESA, 1280 x1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
VESA, 1920 x1080 6 7.5 60.0 148.5 + /+
Vertical
frequency
(Hz)
Pixel clock
(MHz)
Sync polarity
(Horizontal/
Vertical)
About your monitor │ 11
Electrical specifications
Description
Values
Video input signals • Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
• HDMI 1.4 (HDCP 1.4), 600 mV for each differential line,
100 Ω input impedance per differential pair
Synchronization
input signals
AC input voltage/
frequency/current
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
Inrush current 30 A (120 V AC Input)
60 A (240 V AC Input)
Power Consumption 0.2 W (Off Mode)
0.3 W (Standby Mode)
12.9 W (On Mode)
20 W (Max)
15.95 W (Pon)
50.59 kWh (TEC)
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon : Power consumption of On Mode measured with reference to Energy Star test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test method.
1
1
1
2
3
3
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy
or completeness is expressed or implied.
12 │ About your monitor
Physical characteristics
Description Values
Signal cable type:
Analog
Digital
Dimensions (with stand):
Height 385.20 mm (15.17 in.)
Width 488.90 mm (19.25 in.)
Depth 152.80 mm (6.02 in.)
Dimensions (without stand):
Height 294.70 mm (11.60 in.)
Width 488.90 mm (19.25 in.)
Depth 46.40 mm (1.83 in.)
Stand dimensions:
Height 171.60 mm (6.76 in.)
Width 249 mm (9.80 in.)
Depth 152.80 mm (6.02 in.)
Weight:
With packaging 4.80 kg (10.58 lb)
With stand assembly and
cables
Without stand assembly and
cables
Weight of stand assembly 0.52 kg (1.15 lb)
D-Sub (VGA), 15 pins;
HDMI, 19 pins
3.45 kg (7.61 lb)
2.67 kg (5.89 lb)
About your monitor │ 13
Environmental characteristics
Description Values
Temperature:
Operating 0°C to 40°C (32°F to 104°F)
Non-operating:
Storage
Shipping
Humidity:
Operating 10% to 80% (non-condensing)
Non-operating:
Storage
Shipping
Altitude:
Operating (maximum) 5,000 m (16,400 ft)
Non-operating (maximum) 12,192 m (40,000 ft)
Thermal dissipation 68.2 BTU/hour (maximum)
• -20°C to 60°C (-4°F to 140°F)
• -20°C to 60°C (-4°F to 140°F)
• 5% to 90% (non-condensing)
• 5% to 90% (non-condensing)
58.0 BTU/hour (typical)
14 │ About your monitor
Pin assignments
D-Sub 15-pin connector
Pin Number Signal Assignment
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5 V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
About your monitor │ 15
Loading...