Dell PowerEdge KVM 1081AD, 1081AD User Manual
Dell™ Remote Console Switch
User’s Guide
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of
data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potent ial for property damage, personal
injury, or death.
___________________
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved.
2161DS-2/4161DS/2321DS Remote Console Switch
Third Party Software. You acknowledge that the SOFTW ARE PRODUCT may contain or be provided
with copyrighted software of Dell's suppliers as identified in associated documentation or other printed
or electronic materials (“Third Party Software”) which are obtained under a license from such
suppliers. Y our use of an y such Third Party Software shall be subject to and you agree to comply with
the applicable restrictions and other terms and conditions set forth in such documentation or materials
as set forth in any “Third-Party Licenses ReadMe” file or similar file located in the installation directory
for the SOFTWARE PRODUCT.
Any open source software is distributed in the hope that it will be useful, but is provided “as is” without
any expressed or implied warranty; including but not limited to the implied warranty of merchantablity
or fitness for a particular purpose. In no event shall Dell, the copyright holders, or the contributors be
liable for any direct, indirect, inci dental, special, exemplary, or consequential damages ( including, but
not limited to, procurement of substitute goods or services; loss of use, data or profits; or business
interruption) however caused and on any theory of liability, whether in contract, strict liability , or tort
(including negligence or otherwise) arising in any way out of the use of this software, even if advised
of the possibility of such damage.
Reproduction of these materials in any manner whatsoever without written permission of Dell Inc. is
strictly forbidden.
Trademarks used in this text: Avocent is a registered trademarks of Avocent Corporation. OSCAR is
a registered trademark of Avocent Corporation or its affiliates. Dell, OpenManage, and the DEL L
logo are trademarks of Dell Inc.; Active Directory , DirectDraw, Internet Explorer, Microsoft, Win32,
Windows, Windows NT, Windows Serve r, and Windows Vista are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries; Intel and Pentium
are registered trademarks of Intel Corporation; Red Hat and Red Hat Enterprise Linux are registered
trademarks of Red Hat, Inc.; SUSE is a registered trademark of Novell Inc. in the United States and
other countries; UNIX is a registered trademark of The Open Group in the United States and other
countries; Sun, Sun Microsystems, and the Sun logo are trademarks or registered trademarks of Sun
Microsystems, I n c. or its subsidiaries in the United States and other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
590-1049-501A
October 2010
Model 2161DS-2/4161DS/2321DS Remote Console Switch
Safety and EMC Approvals and Markings
• UL / cUL
• CE - EU
•N (Nemko)
•GOST
•C-Tick
•NOM / NYCE
•MIC (BCC)
•SASO
•GS
•IRAM
•FCC, ICES,
•VCCI
•SoNCAP
•SABS
•Bellis
•FIS/ Kvalitet
•Koncar
•KUCAS
•INSM
•Ukrtest
•STZ Z
Safety certifications and EMC certifications for this product are obtained under
one or more of the following designations: CMN (Certification Model
Number), MPN (Manufacturer’s Part Number) or Sales Level Model
designation. The designation that is referenced in the EMC and/or safety
reports and certificates is printed on the label applied to this product.
Please refer to the
Dell Regulatory Technical Bulletin
included with your Remote
Console Switch for more detailed EMC and EA text.
Contents v
Contents
Safety Precautions. . . . . . . . . . . . . . . . . . . . xiii
General
. . . . . . . . . . . . . . . . . . . . . . . xiii
Rack Mounting of Systems
. . . . . . . . . . . . . xv
LAN Options. . . . . . . . . . . . . . . . . . . . . xvi
1 Product Overview . . . . . . . . . . . . . . . . . . 1
Remote Console Switch Features and Benefits. . . . . . 1
SIP Intelligent Module
. . . . . . . . . . . . . . . . 1
Multiplatform Support . . . . . . . . . . . . . . . . 2
Interoperability with Avocent® IQ Module Intelligent Cabling
2
OSCAR Interface
. . . . . . . . . . . . . . . . . . . 2
On-board Web Interface . . . . . . . . . . . . . . . 2
DSView® 3 Management Software Plug-in
. . . . . 2
Virtual Media
. . . . . . . . . . . . . . . . . . . . . 3
Security . . . . . . . . . . . . . . . . . . . . . . . . 3
Encryption
. . . . . . . . . . . . . . . . . . . . . . . 3
Operation Modes
. . . . . . . . . . . . . . . . . . . 4
Video . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FLASH Upgradeable
. . . . . . . . . . . . . . . . . 5
Cascade (Tier) Expansion. . . . . . . . . . . . . . . 5
Remote Console Switch Software Features and Benefits 5
Easy to Install and Configure
. . . . . . . . . . . . . 6
Powerful Customization Capabilities . . . . . . . . . 6
Extensive Remote Console Switch Management
. . 6
IPv4 and IPv6 Capabilities
. . . . . . . . . . . . . . 6
vi Contents
LDAP . . . . . . . . . . . . . . . . . . . . . . . . . 6
Interoperability with Avocent Products
. . . . . . . . 7
2 Installation . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Console Switch Quick Setup Checklist . . . . . 9
Remote Console Switch Installation and Setup
. . . . . 10
Getting Started
. . . . . . . . . . . . . . . . . . . 10
Setting Up Your Network
. . . . . . . . . . . . . . 11
Keyboards
. . . . . . . . . . . . . . . . . . . . . . 11
Rack Mounting Your Remote Console Switch Unit
. . . 11
Installing the Remote Console Switch Unit
. . . . . 15
Video Optimization
. . . . . . . . . . . . . . . . . 24
Mouse Acceleration . . . . . . . . . . . . . . . . 24
Connecting a SIP
. . . . . . . . . . . . . . . . . . 24
Adding a Cascade Switch
. . . . . . . . . . . . . . 26
Cascading with Legacy Switches. . . . . . . . . . 29
Adding a PEM (Optional)
. . . . . . . . . . . . . . 30
Connecting to the Network
. . . . . . . . . . . . . 32
On-board Web Interface Installation and Setup
. . . . . 32
Supported Browsers
. . . . . . . . . . . . . . . . 32
Launching the On-board Web Interface
. . . . . . 32
3 Controlling Your System at the Analog Ports 35
Viewing and Selecting Ports and Devices . . . . . . . 35
Selecting Devices
. . . . . . . . . . . . . . . . . . 37
Soft Switching
. . . . . . . . . . . . . . . . . . . . 37
Navigating the OSCAR Interface
. . . . . . . . . . . . . 38
Contents vii
Configuring OSCAR Interface Menus . . . . . . . . . . 40
Changing the Display Behavior
. . . . . . . . . . . 41
Setting Console Security
. . . . . . . . . . . . . . 43
Controlling the Status Flag . . . . . . . . . . . . . 45
Setting the Interface Language
. . . . . . . . . . . 47
Assigning Device Types
. . . . . . . . . . . . . . 47
Assigning Device Names . . . . . . . . . . . . . . 49
Configuring Network Settings
. . . . . . . . . . . 50
Displaying Version Information
. . . . . . . . . . . . . 52
Scanning Your System . . . . . . . . . . . . . . . . . . 52
Setting the Preemption Warning
. . . . . . . . . . . . 54
Displaying Configuration Information
. . . . . . . . . . 55
Running System Diagnostics . . . . . . . . . . . . . . 56
Broadcasting to Servers
. . . . . . . . . . . . . . . . . 57
Power Controlling Devices
. . . . . . . . . . . . . . . 59
Power window
. . . . . . . . . . . . . . . . . . . 59
PDUs window
. . . . . . . . . . . . . . . . . . . . 60
PDU Settings window
. . . . . . . . . . . . . . . . 60
PDU Inlets window . . . . . . . . . . . . . . . . . 61
PDU Outlets window
. . . . . . . . . . . . . . . . 62
4 Using the Viewer . . . . . . . . . . . . . . . . . . . 65
Accessing Servers from the On-board Web Interface . 65
Interacting With the Server Being Viewed . . . . . . . 66
Viewer Window Features
. . . . . . . . . . . . . . 67
Adjusting the Viewer . . . . . . . . . . . . . . . . 68
Adjusting the Viewer Resolution
. . . . . . . . . . 71
viii Contents
Adjusting the Video Quality . . . . . . . . . . . . . 72
Minimizing Remote Video Session Discoloration
. . 74
Improving Screen Background Color Display . . . 74
Setting Mouse Scaling
. . . . . . . . . . . . . . . 75
Minimizing Mouse Trailing
. . . . . . . . . . . . . 76
Improving Mouse Performance. . . . . . . . . . . 76
Viewing Multiple Servers Using the Scan Mode
. . 77
Scanning Your Servers
. . . . . . . . . . . . . . . 77
Thumbnail View Status Indicators . . . . . . . . . 79
Navigating the Thumbnail Viewer
. . . . . . . . . 80
Using Macros to Send Keystrokes to the Server
. . 81
Session Options - General Tab . . . . . . . . . . . 82
Screen Capturing
. . . . . . . . . . . . . . . . . . 83
Preemption
. . . . . . . . . . . . . . . . . . . . . . . . 84
Preemption of Remote User by a Remote Administrator
85
Preemption of a Local User/Remote Administrator by a Remote
Administrator
. . . . . . . . . . . . . . . . . . . . 85
Connection Sharing . . . . . . . . . . . . . . . . . 86
5 Virtual Media . . . . . . . . . . . . . . . . . . . . . 89
Common Virtual Media Terms . . . . . . . . . . . . . . 89
Configuring Virtual Media Locally
. . . . . . . . . . . . 90
Enabling/Disabling Virtual Media Using the OSCAR Interface
90
Setting Virtual Media Options Using the OSCAR Interface
91
Configuring Virtual Media Remotely
. . . . . . . . . . 93
Enabling/Disabling Virtual Media Using the On-board Web
Interface
. . . . . . . . . . . . . . . . . . . . . . 93
Setting Virtual Media Options Using the On-board Web Interface
95
Launching Virtual Media
. . . . . . . . . . . . . . . . . 95
Contents ix
Virtual Floppy Drive . . . . . . . . . . . . . . . . . 97
Virtual CD/DVD Drive
. . . . . . . . . . . . . . . . 98
Virtual Media Connection Status . . . . . . . . . . 98
Reserving a Virtual Media Session
. . . . . . . . . 99
Resetting the USB Bus
. . . . . . . . . . . . . . . 99
6 Managing Your Remote Console Switch Using the
On-board Web Interface . . . . . . . . . . . . 101
Migrating Switches from the Remote Console Switch Software
101
Viewing and Configuring Remote Console Switch Parameters
102
Changing Remote Console Switch Parameters
. . 102
Setting Up User Accounts
. . . . . . . . . . . . . 104
Locking and Unlocking User Accounts. . . . . . . 108
Enabling and Configuring SNMP
. . . . . . . . . . 109
Enabling Individual SNMP Traps
. . . . . . . . . . 111
Viewing and Resynchronizing Server Connections 112
Modifying a Server Name
. . . . . . . . . . . . . 113
Viewing and Configuring Tiered Switch Connections
114
Viewing the SIPs and IQ Modules . . . . . . . . . 115
Viewing Remote Console Switch Version Information . 116
SIPs Subcategory
. . . . . . . . . . . . . . . . . . 117
Upgrading Firmware
. . . . . . . . . . . . . . . . . . . 120
Controlling User Status
. . . . . . . . . . . . . . . . . 123
Rebooting Your System . . . . . . . . . . . . . . . . . 125
Managing Remote Console Switch Configuration Files
125
Managing User Databases
. . . . . . . . . . . . . . . 126
Installing a Web Certificate . . . . . . . . . . . . . . . 128
x Contents
Managing PDUs . . . . . . . . . . . . . . . . . . . . 129
7 Migrating Your Remote Console Switch 133
Accessing the AMP . . . . . . . . . . . . . . . . . . 133
Upgrading Firmware Using the AMP . . . . . . . . . 134
Upgrading Remote Console Switch Firmware
. . 134
Migrating Remote Console Switches to the On-board Web Interface
135
Using the Resync Wizard
. . . . . . . . . . . . . . . 137
8 LDAP Feature for the Remote Console Switch 139
Overview . . . . . . . . . . . . . . . . . . . . . . . . 139
The Structure of Active Directory . . . . . . . . . . . 139
Domain Controller Computers
. . . . . . . . . . 140
Object Classes . . . . . . . . . . . . . . . . . . 140
Attributes
. . . . . . . . . . . . . . . . . . . . . 141
Schema Extensions
. . . . . . . . . . . . . . . . 141
Standard Schema versus Dell Extended Schema
. . . 142
Standard Installation
. . . . . . . . . . . . . . . . . . 143
Configure the Override Admin Account . . . . . . . . 144
Configuring DNS Settings
. . . . . . . . . . . . . . . 144
Configuring the Network Time Protocol Settings
. . . 145
Configuring the LDAP Authentication Parameters . . 146
LDAP SSL Certificates
. . . . . . . . . . . . . . . . . 149
Contents xi
Enabling SSL on a Domain Controller . . . . . . . 149
Login Timeout
. . . . . . . . . . . . . . . . . . . . 154
CA Certificate Information Display
. . . . . . . . . . . 154
Configuring Group Objects
. . . . . . . . . . . . . . . 155
Active Directory Object Overview for Standard Schema
158
Dell Extended Schema Active Directory Object Overview
159
Configuring Active Directory with Dell Schema Extensions to Access
Your RCS
. . . . . . . . . . . . . . . . . . . . . . . . . 164
Extending the Active Directory Schema (Optional)
164
Installing the Dell Extension to the Active Directory Users and
Computers Snap-In (Optional) . . . . . . . . . . . 165
Adding Users and Privileges to Active Directory with Dell Schema
Extensions
. . . . . . . . . . . . . . . . . . . . . . . . 166
Creating a SIP Object
. . . . . . . . . . . . . . . . 166
Creating a Privilege Object
. . . . . . . . . . . . . 166
Using Dell Association Objects Syntax
. . . . . . . . . 167
Creating an Association Object
. . . . . . . . . . . 168
Adding Objects to an Association Object
. . . . . 168
Console Redirection Access Security
. . . . . . . . . . 169
Using Active Directory to Log In to the Remote Console Switch 170
Target Device Naming Requirements for LDAP Implementation
170
Frequently Asked Questions
. . . . . . . . . . . . . . . 171
A Appendix A: Remote Console Switch Software
xii Contents
Keyboard and Mouse Shortcuts . . . . . . . . . 175
B Appendix B: TCP Ports
. . . . . . . . . . . . . . 179
C Appendix C: MIBs and SNMP Traps . . . 181
MIB Groups . . . . . . . . . . . . . . . . . . . . 182
Enterprise Traps. . . . . . . . . . . . . . . . . . 195
D Appendix D: FLASH Upgrades . . . . . . . . 211
Upgrading the Remote Console Switch. . . . . . 211
Upgrading the SIP module firmware
. . . . . . . 214
E Appendix E: Technical Specifications . . 217
F Appendix F: Technical Support . . . . . . . 221
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
xiii
Safety Precautions
Use the following safety guidelines to help ensure your own personal safety
and to help protect your system and working environment from potential
damage.
CAUTION: The power supplies in your system may produce high voltages and
energy hazards, which can cause bodily harm. Only trained service technicians
are authorized to remove the covers and access any of the components inside the
system. This warning applies to Dell™ PowerEdge™ servers and Dell
PowerVault™ storage systems.
This document pertains only to the Dell 2161DS-2/4161DS/2321DS Console
Switch. You should also read and follow the additional safety instructions.
•The
Remote Console Switch Installation Guide
included with your rack
solution that describes how to install your system into a rack.
•The
User’s Guide
which provides information about setting up and
operating your rack mounted server system.
• The appropriate Avocent installer/user guide for your product, if
applicable. Visit
avocent.com/manuals
for more information.
General
• Observe and follow service markings.
• Do not service any product except as explained in your system
documentation.
• Opening or removing covers that are marked with the triangular symbol
with a lightning bolt may expose you to electrical shock.
• Components inside these compartments should be serviced only by a
trained service technician.
– This product contains no serviceable components. Do not attempt to
open.
xiv
• If any of the following conditions occur, unplug the product from the
electrical outlet and replace the part or contact your trained service
provider:
– The power cable, extension cable, or plug is damaged.
– An object has fallen into the product.
– The product has been exposed to water.
– The product has been dropped or damaged.
– The product does not operate correctly when you follow the operating
instructions.
• Keep your system away from radiators and heat sources. Also, do not block
cooling vents.
• Do not spill food or liquids on your system components, and never operate
the product in a wet environment. If the system gets wet, see the
appropriate section in your troubleshooting guide or contact your trained
service provider.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal
components.
• Operate the product only from the type of external power source indicated
on the electrical ratings label. If you are not sure of the type of power
source required, consult your service provider or local power company.
NOTICE: To help avoid damaging your system, be sure the voltage selection switch
(if provided) on the power supply is set for the voltage that most closely matches
the AC power available in your location. Also be sure that your monitor and
attached devices are electrically rated to operate.
• Be sure that your monitor and attached devices are electrically rated to
operate with the power available in your location.
• Use only power cables provided with this product.
• To help prevent electric shock, plug the system and peripheral power
cables into properly grounded electrical outlets. These cables are equipped
with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable.
xv
• Observe extension cable and power strip ratings. Make sure that the total
ampere rating of all products plugged into the power strip does not exceed
80 percent of the ampere ratings limit for the power strip.
• To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
uninterruptible power supply (UPS).
• Position system cables and power cables carefully. Route cables so that they
cannot be stepped on or tripped over. Be sure that nothing rests on any
cables.
• Do not modify power cables or plugs. Consult a licensed electrician or your
power company for site modifications. Always follow your local/national
wiring rules.
Rack Mounting of Systems
• Refer to the rack installation documentation accompanying the rack for
specific caution statements and procedures.
• System rack kits are intended to be installed in a rack by trained service
technicians. If a non-Dell rack is utilized, be sure that the rack meets the
specifications of a Dell rack.
• Elevated Ambient Temperature: If installed in a closed rack assembly, the
operation temperature of the rack environment may be greater than room
ambient. Use care not to exceed the rated maximum ambient temperature
of the unit.
• Reduced Air Flow: Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment is
not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven mechanical
loading.
• Circuit Overloading: Consideration should be given to the connection of
the equipment to the supply circuit and the effect that overloading of
circuits might have on overcurrent protection and supply wiring. Consider
equipment nameplate ratings for maximum current.
xvi
• Reliable Earthing: Reliable earthing of rack mounted equipment should be
maintained. Pay particular attention to supply connections other than
direct connections to the branch circuit (for example, use of power strips).
LAN Options
• Do not connect or use during a lightning storm. There may be a risk of
electrical shock from lightning.
• Never connect or use in a wet environment.
Product Overview 1
1
Product Overview
The multiuser, Dell™ 2161DS-2/4161DS/2321DS Remote Console Switch
integrates Dell field-proven digital keyboard, video and mouse (KVM)
switching technology with advanced cable management, flexible access for up
to four simultaneous users, and a patented, next-generation user interface.
The Remote Console Switch features user-side USB and PS/2 ports that
support major device platforms.
Using powerful on-screen management through the Avocent
TM
brand
OSCAR
TM
graphical user interface, Remote Console Switch Software, or on-
board web interface provides easy system configuration and device selection.
Remote Console Switch Features and Benefits
SIP Intelligent Module
The Remote Console Switch also provides SIP intelligent module capability.
The SIP module with CAT 5 design dramatically reduces cable clutter, while
providing optimal resolution and video settings. The built-in memory of the
SIP module simplifies configuration by assigning and retaining unique device
names and Electronic ID (EID) numbers for each attached device. The SIP
module is powered directly from the device and provides Keep Alive
functionality even if the Remote Console Switch is not powered.
PS/2 and USB SIP modules are available allowing direct KVM connectivity to
devices. A USB2 virtual media SIP is also available. Each Remote Console
Switch has up to 32 Analog Rack Interface (ARI) ports for connecting SIP
modules.
Utilizing the SIP module, you can attach additional switches to expand your
Remote Console Switch system. This flexibility allows you to add capacity as
your data center grows.
2 Product Overview
Multiplatform Support
The Dell SIP modules available for use with the Remote Console Switch
support PS/2, USB and USB2 device environments. Using the OSCAR
®
interface
in conjunction with these modules allows you to switch easily
across platforms.
Interoperability with Avocent® IQ Module Intelligent Cabling
Avocent IQ module intelligent cable may also be used to connect devices to
the Remote Console Switch. PS/2, USB, Sun
®
, and serial cabling options are
available. For more information, please refer to the appropriate Avocent
installer/user guide for your product. Visit avocent.com/manuals for more
information.
OSCAR Interface
You can use the Avocent brand OSCAR interface to manage the Remote
Console Switch. The OSCAR interface features intuitive menus to configure
your switch system and select computers. Devices can be identified by a
name, EID, or port number, allowing you to assign unique device names.
On-board Web Interface
The on-board web interface provides similar management functions as the
Remote Console Switch Software, but does not require a software server or
any installation. The on-board web interface is launched directly from the
switch, and any servers connected to the Remote Console Switch are
automatically detected. You can use the on-board web interface to configure
Remote Console Switches from a web browser. Launch the Viewer from the
on-board web interface to establish KVM and virtual media sessions to target
devices. The on-board web interface also supports LDAP authentication,
which
allows permissions for multiple Remote Console Switches to be managed
through a single interface.
DSView® 3 Management Software Plug-in
The Avocent DSView 3 management software is a secure, web browser-based,
centralized enterprise management solution that allows users to remotely
access, manage, monitor, and control target devices through managed
appliances. A session may be launched to a target device with a single point of
access.
Product Overview 3
You can manage and connect to multi-vendor servers and devices from within
the DSView 3 software. Include your Dell Remote Console Switch in the
DSView 3 software heterogeneous network environment with the DSView 3
software plug-in. Once a Remote Console Switch is added, you can use the
DSView 3 software for fault management, sessions management, firmware
upgrades, and more.
Virtual Media
Virtual media allows you to view, move, or copy data located on virtual media
to and from any server that is connected to the Remote Console Switch.
Manage remote systems more efficiently by allowing operating system
installation, operating system recovery, hard drive recovery or duplication,
BIOS updating, and server backup.
Virtual media can be connected directly to USB ports on the switch or the
server hosting the on-board web interface browser session. You can open a
virtual media session to a server from the Viewer. The Viewer can be opened
from either the on-board web interface or Remote Console Switch software.
NOTE: To open a virtual media session with a server, the server must first be
connected to a Remote Console Switch using a virtual media capable USB2 SIP
module.
Security
The OSCAR interface allows you to protect your system with a screen saver
password. The screen saver mode engages and access is prohibited until the
appropriate password is entered to reactivate the system. By typing Help in
the password dialog, you are directed to Dell Technical Support.
Recommended usage for the Remote Console Switch is in a datacenter
infrastructure protected by a firewall.
Encryption
The Remote Console Switch supports 128-bit SSL, as well as AES, DES, and
3DES encryption of keyboard/mouse, video, and virtual media sessions.
4 Product Overview
Operation Modes
The OSCAR interface provides convenient operation modes for easy system
administration of the Remote Console Switch. These modes (Broadcast,
Scan, Switch, and Share) allow you to manage your switching activities.
Chapter 3, "Controlling Your System at the Analog Ports" on page 35, explains
these modes in detail.
Video
The Remote Console Switch provides optimal resolution for analog VGA,
SVGA and XGA video. You can achieve resolutions of 1024 x 768, depending
on the length of cable separating your switch and servers.
Table 1-1. Maximum Resolution Refresh Rate Video Type
720 x 400 @ 70 Hz VGA
640 x 480 @ 60 Hz VGA
640 x 480 @ 72 Hz VESA
640 x 480 @ 75 Hz VESA
800 x 500 @ 60 Hz VESA
800 x 600 @ 56 Hz VESA
800 x 600 @ 60 Hz VESA
800 x 600 @ 70 Hz VESA
800 x 600 @ 75 Hz VESA
1024 x 640 @ 60 Hz VESA
1024 x 768 @ 60 Hz VESA
1024 x 768 @ 70 Hz VESA
1024 x 768 @ 75 Hz VESA
1280 x 800 @ 60 Hz VESA
Product Overview 5
FLASH Upgradeable
Upgrade your Remote Console Switch and SIP modules at any time to ensure
you are always running the most current firmware version available. Flash
Upgrades can be initiated through the OSCAR interface, on-board web
interface, or the Serial Console. The Remote Console Switch can be
configured to perform automatic firmware upgrades of SIP modules. See
"Appendix D: FLASH Upgrades" on page 211 for more information.
Cascade (Tier) Expansion
The Remote Console Switch features allow you to cascade additional Dell
Console Switches from each of the Analog Rack Interface (ARI) ports on the
switch. The cascaded switches are attached in the same manner as any device.
This additional tier of units allows you to attach up to 512 servers in one
system. See "Adding a Cascade Switch" on page 26.
Remote Console Switch Software Features and
Benefits
NOTE: For how to use the Remote Console Switch Software, see the Dell Remote
Console Switch Software User’s Guide or the help included with the software.
The Dell™ Remote Console Switch Software is a cross-platform management
application that allows you to view and control the Dell Remote Console
Switch and all attached servers. The cross-platform design ensures
compatibility with most popular operating systems and hardware platforms.
The Remote Console Switch Software provides secure switch-based
authentication, data transfers, and username/password storage. Each switch
handles authentication and access control individually for more decentralized
system control.
The Remote Console Switch Software utilizes Explorer-like navigation with
an intuitive split-screen interface, providing you with a single point of access
for your entire system. From here, you can manage your existing switches,
install a new switch, or launch a video session to a system server. Built-in
groupings such as Servers, Sites, and Folders provide an easy way to select the
units to view. Powerful search and sort capabilities allow you to easily find any
unit.
6 Product Overview
Easy to Install and Configure
The Remote Console Switch Software is designed for easy installation and
operation. Auto-discovery of managed switches enables you to install new
units in minutes. Wizard-based installation and online help simplify initial
system configuration. The intuitive graphical interface makes managing and
updating switches simple and straightforward.
Powerful Customization Capabilities
Tailor the Remote Console Switch Software to fit your specific system needs.
Take advantage of built-in groups or create your own. Customize unit and
field names, and icons for maximum flexibility and convenience. Using
names that are meaningful to you makes it easy to quickly find any system
unit.
Extensive Remote Console Switch Management
The Remote Console Switch Software allows you to add and manage multiple
switches in one system. Once a new switch is installed, you can configure
switch parameters, control and preempt user video sessions, and execute
numerous control functions, such as rebooting and upgrading your switch.
The Remote Console Switch Software is designed to be compatible with the
Dell OpenManage™ IT Assistant Event Viewer, allowing system
administrators to consolidate system event reports.
IPv4 and IPv6 Capabilities
The Remote Console Switch is compatible with systems using either of the
currently used Internet Protocol Versions, IPv4 and IPv6. You can change the
network settings and choose either IPv4 or IPv6 mode via the serial port,
OSCAR interface, or on-board web interface.
LDAP
The Dell Remote Console Switch Software allows permissions for multiple
Remote Console Switches to be managed through a single interface rather
than individually on each Remote Console Switch. For increased security and
efficiency, the LDAP feature eliminates the need to update access
permissions in individual Remote Console Switches by drawing permissions
from a single network-wide authentication source.
Product Overview 7
The Dell Remote Console Switches can authenticate using the standard
Active Directory schema, or the Dell Extended Schema in order to maximize
compatibility with all of your Dell hardware.
Interoperability with Avocent Products
The Remote Console Switch Software can also be used to manage some
Avocent brand switches allowing increased flexibility in the management of
syste
ms.
In addition, the Remote Console Switch Software includes support for
Avocent brand IQ Modules, expanding the range of server types that can be
managed. The addition of support for Avocent brand IQ modules means that
the following connections are now supported:
• PS/2 modules (Dell and Avocent modules available)
• USB modules (Dell and Avocent modules available)
• Serial modules (Avocent modules available)
• Sun modules (Avocent modules available)
• PS2M modules (Avocent modules available)
NOTE: Dell SIPs are not supported on directly connected Avocent brand switches.
8 Product Overview
Installation 9
2
Installation
The Remote Console Switch system includes the Remote Console Switch,
the Remote Console Switch Software, and the on-board web interface. You
may choose to use either the Remote Console Switch Software or the onboard web interface to manage your system. The on-board web interface
manages a single Remote Console Switch and its connections, while the
Remote Console Switch Software can manage multiple switches and their
connections.
If you plan to use the on-board web interface, you do not need to install the
Remote Console Switch Software. If you have previously used the Remote
Console Switch Software, you can migrate the database to the on-board web
interface. See "Migrating Remote Console Switches to the On-board Web
Interface" on page 135.
NOTE: Please ensure that all your Remote Console Switches have been upgraded to
their most recent version of firmware. For information on upgrading a Remote
Console Switch through the on-board web interface, please see "Upgrading
Firmware" on page 120.
Remote Console Switch Quick Setup Checklist
To set up the Remote Console Switch (see the "Remote Console Switch
Installation and Setup" on page 10:
1
Adjust mouse acceleration on each server to
Slow
or
None
.
2
Install the Remote Console Switch hardware, and connect a Server
Interface Pod (SIP) or an Avocent brand IQ module to each server or tiered
switch. Connect each SIP or IQ module to the Remote Console Switch
with CAT 5 cabling and connect the keyboard, monitor, and mouse
connectors to the Analog Port of the Remote Console Switch.
3
Connect a terminal to the configuration (serial) port on the back panel of
the Remote Console Switch and set up network configuration (set network
speed and address type). The IP address can be set here or from the
Remote Console Switch Software. Dell recommends using a static IP
address for ease of configuration.
10 Installation
4
Using the local port configuration, input all server names via the OSCAR
interface.
To set up the Remote Console Switch Software, see the Dell Remote Console
Switch Software User’s Guide or the help included with the software.
Remote Console Switch Installation and Setup
The Remote Console Switch system uses Ethernet networking infrastructure
and TCP/IP protocol to transmit keyboard, video, and mouse information
between operators and connected computers. Although 10BaseT Ethernet or
Gigabit may be used, Dell recommends a dedicated, switched 100BaseT
network.
Getting Started
Before installing your Remote Console Switch, refer to the list below to
ensure you have all items that shipped with the Remote Console Switch, as
well as other items necessary for proper installation.
Supplied with the Remote Console Switch:
• Remote Console Switch unit
• Local country power cord
• 0U mounting bracket
• 1U mounting bracket
• 1U mounting bracket hardware kit
•Serial cable
•Cat5 cable
• Remote Console Switch System User's Guide on CD
• Installation Instructions
• Safety booklet
• Regulatory booklet
Additional items needed:
• One Dell SIP or IQ module per attached device
• One CAT 5 patch cable per attached device (up to 30 meters)
Optional items:
Installation 11
• Front Access Panel
• Port Expansion Module (PEM)
NOTE: A virtual media session cannot be opened to a server that is connected to a
PEM.
Setting Up Your Network
The Remote Console Switch system uses IP addresses to uniquely identify
the Remote Console Switch units and the computers running Remote
Console Switch Software. The Remote Console Switch supports DHCP and
static IP addressing. (If you are connecting your remote software to the
previous 2161DS, you will need to use BootP instead of DHCP).
NOTE: For how to use the Remote Console Switch Software, see the Dell Remote
Console Switch Software User’s Guide or the help included with the software.
Keyboards
USB or PS/2 type keyboards may be connected to the Analog Port of the
Remote Console Switch.
NOTE: The Remote Console Switch also supports the use of multiple keyboards
and multiple mice on the Analog Port. The use of more than one input device
simultaneously, however, may produce unpredictable results.
Rack Mounting Your Remote Console Switch Unit
Obtain a Switch Mounting Bracket Kit (0U or 1U) to rack-mount your
Remote Console Switch unit. Before installing the Remote Console Switch
and other components in the rack, stabilize the rack in a permanent location.
Start rack mounting your equipment at the bottom of the rack, then work to
the top. Avoid uneven loading or overloading of racks.
CAUTION: Before installing systems in a rack, install front and side stabilizers on
stand-alone racks or the front stabilizer on racks joined to other racks. Failure to
install stabilizers accordingly before installing systems in a rack could cause the
rack to tip over, potentially resulting in bodily injury under certain circumstances.
Therefore, always install the stabilizer(s) before installing components in the
rack.
To install the 0U switch mounting bracket (shipped as default):
12 Installation
1 Line up the holes of the mounting brackets with the screw holes in the
switch.
2 Fasten the mounting bracket to the switch using the button head socket
cap screws on each side.
3 Mount the switch assembly to the rack by inserting the three mounting
hooks on one side of the bracket into square holes in the vertical rack.
4 Press down until the blue push button pops out and clicks.
Figure 2-1. OU Mounting Bracket Installation
To install the 2161DS-2/4161DS Remote Console Switch 1U four point
switch mounting bracket:
1 Remove the screws on each side of the 1U four-point switch and set
them aside to attach to the front 1U bracket pieces later.
2 Line up the vent holes in the “long side” of the kit’s front brackets with
the vent holes in the switch.
NOTE: The switch vent holes must not be covered by the bracket, which will occur
if installed on the wrong side of the switch.
Installation 13
3 Line up the screw holes in the bracket with the screw holes in the switch.
4 With a Phillips screwdriver, fasten the front mounting brackets to the
switch using two screws on each side.
5 Attach four cage nuts or clip nuts to the rack mounting flange of the
rack cabinet’s front so that the nut is positioned on the inside of the
rack.
6 Mount the switch assembly to the rack cabinet by matching the holes in
the “short side” of each bracket to an appropriate set of matching holes
on your rack cabinet. Next, insert the combination hex head screws
through the slots in the bracket, then the holes in the mounting rail, and
then into the cage nuts or clip nuts.
7 Attach four cage nuts or clip nuts to the rack mounting flange of the
rack cabinet back so that the nut is positioned on the inside of the rack.
8 Slide the rear brackets into the channel of the front brackets adjusting
them to fit the rack depth.
9 Mount the rear bracket to the rack cabinet by matching the holes in the
“short side” of each bracket to an appropriate set of matching holes on
your rack cabinet, ensuring the switch is level within the rack.
10 Insert the combination hex head screws through the slots in the bracket
and the holes in the mounting rail, then into the cage nuts or clip nuts.
14 Installation
Figure 2-2. 2161DS-2/4161DS Remote Console Switch 1U Mounting Bracket Installation
To install the 2321DS Remote Console Switch mounting bracket:
1
Remove the three truss head screws from the right side of the switch
chassis, and position and attach the right mounting bracket to the right
side of the switch chassis with three of the flat head screws provided.
NOTE: The switch vent holes must not be covered by the bracket, which will occur
if installed on the wrong side of the switch.
2
Repeat the procedure for the left side of the switch chassis.
3
Install a push nut to one end of the cable support rod. Position the
extensions with their slotted mounting flanges facing in opposing
directions.
4
Select a position hole on the lower side of the slide extensions. Slide the
support rod through the selected hole and the hole on the opposite
extension.
5
Install the remaining push nut on the other end of the cable support rod.
6
Slide the extension assembly into the switch chassis/bracket assembly as
shown in the illustration. Be sure to orient the extension assembly so that
the cable support rod is in the lower row of extension holes.
Loading...