Dell P2312Ht, P2212Hb User Manual

Dell™ P2212H/P2312H Monitor

User's Guide

Setting the display resolution to 1920 x 1080 (maximum)

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model P2212Hb/P2312Ht

November 2011 Rev. A01

Dell™ P2212H/P2312H Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Model P2212Hb/P2312Ht

November 2011 Rev. A01

Back to Contents Page

Setting Up Your Monitor

Dell™ P2212H/P2312H Monitor

Setting the display resolution to 1920 x 1080 (maximum)

For maximum display performance with Microsoft® Windows® operating systems, set the display resolution to 1920 x

1080 pixels by performing the following steps:

In Windows XP:

1. Right-click on the desktop and click Properties.

2. Select the Settings tab.

3. Move the slider-bar to the right by pressing and holding the left-mouse button and adjust the screen resolution to

1920 x 1080.

4. Click OK.

In Windows Vista

1. Right-click on the desktop and click Personalization.

2. Click Change Display Settings.

or Windows® 7:

3. Move the slider-bar to the right by pressing and holding the left-mouse button and adjust the screen resolution to

1920 x 1080.

4. Click OK. If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Please choose the scenario

below that best describes the computer system you are using, and follow the given steps.

1: If you have a Dell™ desktop or a Dell™ portable computer with internet access. 2: If you have a non Dell™ desktop, portable computer, or graphics card.

Back to Contents Page

About Your Monitor

Dell™ P2212H/P2312H Monitor User's Guide

Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability Universal Serial Bus (USB) Interface LCD Monitor Quality and Pixel Policy Maintenance Guidelines

Package Contents

Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions. NOTE: P2212H/P2312H monitor is BFR/PVC-free (Halogen-free) excluding external cables.

Monitor

Stand

Power Cable

VGA Cable (Attached to the monitor)

DVI Cable

USB upstream cable (enables the USB ports on the monitor)

Drivers and Documentation media Quick Setup Guide Product and Safety Information Guide

Product Features

The Dell Professional P2212H/P2312H flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include:

■ P2212H: 54.68 cm (21.5-inch) viewable area display (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions.

■ P2312H: 58.42 cm (23-inch) viewable area display (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions.

■ Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.

■ Tilt, swivel, vertical extension and rotate adjustment capability.

■ Removable stand and Video Electronics Standards Association (VESA

■ Plug and play capability if supported by your system.

■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

■ Software and documentation media includes an Information File (INF), Image Color Matching File (ICM), PowerNap software application and product documentation.

■ Energy Saver feature for Energy Star compliance.

■ Security lock slot.

■ Stand lock.

■ Asset Management Capability.

■ Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality.

■ EPEAT Gold Rating.

■ P2212H/P2312H monitor is BFR/PVC-free (Halogen-free) excluding external cables.

■ TCO-Certified Displays.

■ PowerNap Software included (comes in the CD shipped with the monitor).

■ Arsenic-Free glass and Mercury-Free for the panel only.

■ High Dynamic Contrast Ratio (2,000,000:1).

■ 0.1 W standby power when in the sleep mode.

™) 100 mm mounting holes for flexible mounting solutions.

■ Energy Gauge shows the energy level being consumed by the monitor in real time.

Identifying Parts and Controls

Front View

Front view Front panel controls

Label Description

1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu

4 Exit 5 Power (with power light indicator)

Back View

Back view Back view with monitor stand

Label Description Use

VESA mounting holes (100 mm x 100 mm

- behind attached VESA Plate)

Regulatory label Lists the regulatory approvals.

Stand release button Release stand from monitor.

Barcode serial number label Refer to this label if you need to contact Dell for technical support.

Security lock slot Secures monitor with security cable lock.

Dell Soundbar mounting brackets Attaches the optional Dell Soundbar.

USB downstream ports Connect your USB devices.

Cable management slot Use to organize cables by placing them through the slot.

Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).

Side View

Bottom View

Left view Right view

Bottom view Bottom view with monitor stand

Label Description Use

1 AC power cord connector Connect the power cable. 2 DC power connector for Dell Soundbar Connect the power cord for the soundbar (optional). 3 DVI connector Connect your computer DVI cable. 4 VGA connector Connect your computer VGA cable.

5 USB upstream port

6 Stand lock feature

Connect the USB cable that came with your monitor to the monitor and the computer. Once this cable is connected, you can use the USB connectors on the side of the monitor.

To lock the stand to the monitor using M3 x 6 mm screw (screw is not provided).

Monitor Specifications

Flat Panel Specifications

Model P2212H P2312H Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel type TN TN Screen dimensions 546.8 mm (21.5-inches diagonal viewable image size) 584.2 mm (23-inches diagonal viewable image size) Preset display area 476.64 (H) X 268.11 (V) mm 509.76 (H) X 286.74 (V) mm Horizontal 476.64 mm (18.77 inches) 509.76 mm (20.07 inches) Vertical 268.11 mm (10.56 inches) 286.74 mm (11.29 inches)

Pixel pitch 0.248 mm 0.265 mm

Viewing angle

Luminance output 250 cd/m² (typical) 250 cd/m² (typical)

Contrast ratio

Faceplate coating Antiglare with hard-coating 3H Antiglare with hard-coating 3H Backlight LED edgelight system LED edgelight system Response time 5 ms black to white (typical) 5 ms black to white (typical) Color depth 16.7 million colors 16.7 million colors Color gamut 82%* 84%*

*[P2212H] color gamut (typical) is based on CIE1976 (82%) and CIE1931 (72%) test standards. *[P2312H] color gamut (typical) is based on CIE1976 (84%) and CIE1931 (72%) test standards.

160° (vertical) typical 170° (horizontal) typical

1000 to 1 (typical) 2M to 1 (typical Dynamic Contrast On)

160° (vertical) typical 170° (horizontal) typical

1000 to 1 (typical) 2M to 1 (typical Dynamic Contrast On)

Resolution Specifications

Model P2212H/P2312H Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 76 Hz (automatic) Maximum preset resolution 1920 x 1080 at 60 Hz

Supported Video Modes

Model P2212H/P2312H Video display capabilities (DVI playback) 480p, 480i, 576p, 720p, 1080p, 576i, 1080i

Preset Display Modes

P2212H/P2312H

Display Mode

Horizontal Frequency Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)

(kHz)

VESA, 720 x 400 31.5 70.0 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/VESA, 640 x 480 37.5 75.0 31.5 -/VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1920 x 1080 67.5 60.0 148.5 +/+

Electrical Specifications

Model P2212H and P2312H

Video input signals

Synchronization input signals

AC input voltage/frequency/current

Inrush current

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)

Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance

P2212H - 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.2 A (typical) P2312H - 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (typical)

120 V : 30 A (Max) 240 V : 60 A (Max)

Physical Characteristics

Model P2212H P2312H

Connector type

Signal cable type

15-pin D-subminiature, blue connector; DVI-D, white connector

Digital: detachable, DVI-D, solid pins, shipped detached from the monitor Analog: attachable, D-Sub, 15 pins, shipped attached to the monitor

15-pin D-subminiature, blue connector; DVI-D, white connector

Digital: detachable, DVI-D, solid pins, shipped detached from the monitor Analog: attachable, D-Sub, 15 pins, shipped attached to the monitor

Dimensions (with stand)

Height (extended) 484.5 mm (19.07 inches) 493.9 mm (19.44 inches) Height (compressed) 355.6 mm (14.00 inches) 365.0 mm (14.37 inches) Width 513.0 mm (20.20 inches) 546.4 mm (21.51 inches) Depth 183.3 mm (7.22 inches) 185.4 mm (7.3 inches)

Dimensions (without stand)

Height 304.5 mm (11.99 inches) 323.3 mm (12.73 inches) Width 513.0 mm (20.20 inches) 546.4 mm (21.51 inches) Depth 59.5 mm (2.34 inches) 59.5 mm (2.34 inches)

Stand dimensions

Height (extended) 401.2 mm (15.80 inches) 401.2 mm (15.80 inches) Height (compressed) 358.1 mm (14.10 inches) 358.1 mm (14.10 inches) Width 265.8 mm (10.46 inches) 279.8 mm (11.02 inches) Depth 183.3 mm (7.22 inches) 185.4 mm (7.30 inches)

Weight

Weight with packaging 7.45 kg (16.42 lbs) 7.24 kg (15.96 lbs) Weight with stand

assembly and cables Weight without stand

assembly (For wall mount or VESA mount considerations no cables)

Weight of stand assembly

Front frame gloss

5.88 kg (12.96 lbs) 5.70 kg (12.57 lbs)

3.29 kg (7.24 lbs) 3.44 kg (7.58 lbs)

2.02 kg (4.45 lbs) 1.76 kg (3.87 lbs)

Black Frame - 5.0 gloss unit (max.) Silver Frame - 20.0 gloss unit (max.)

Environmental Characteristics

Model P2212H and P2312H

Temperature

Operating 0 °C to 40 °C

Non-operating

Humidity

Operating 10% to 80% (non-condensing)

Non-operating

Altitude

Operating 3,048 m (10,000 ft) max Non-operating 10,688 m (35,000 ft) max

Thermal dissipation

Storage: -20 °C to 60 °C (-4 °F to 140 °F) Shipping: -20 °C to 60 °C (-4 °F to 140 °F)

Storage: 5% to 90% (non-condensing) Shipping: 5% to 90% (non-condensing)

P2212H:

153.55 BTU/hour (maximum)

71.65 BTU/hour (typical)

P2312H

170.61 BTU/hour (maximum)

85.30 BTU/hour (typical)

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

P2212H

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation Active-off mode

Switch off P2312H

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation Active-off mode

Switch off The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:

Active Inactive

Active Blanked

Blue Amber

Off

Blue Amber

Off

50 W (maximum) ** 21 W (typical) Less than 0.1 W Less than 0.1 W

50 W (maximum) ** 25 W (typical) Less than 0.1 W Less than 0.1 W

Activate the computer and the monitor to gain access to the OSD.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ** Maximum power consumption with max luminance, Dell Soundbar, and USB active.

NOTE: This monitor is ENERGY STAR®-compliant.

Pin Assignments

VGA Connector

Pin 15-pin Side of the Connected Signal Cable Number

1 Video-Red 2 Video-Green 3 Video-Blue

4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B

9 Computer 5 V/3.3 V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock

DVI Connector

Pin 24-pin Side of the Connected Signal Cable Number

1 TMDS RX22 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating

6 DDC Clock 7 DDC Data

8 Floating

9 TMDS RX110 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5 V/+3.3 V power 15 Self test 16 Hot Plug Detect 17 TMDS RX018 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock-

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the left side of your monitor.

Transfer Speed Data

High speed 480 Mbps 2.5 W (Max, each port) Full speed 12 Mbps 2.5 W (Max, each port) Low speed 1.5 Mbps 2.5 W (Max, each port)

NOTE: This monitor supports High-Speed Certified USB 2.0 interface.

Rate

Power Consumption

+ 38 hidden pages