I. GLOBAL ENVIRONMENTAL INFORMATION ......................................................................................................... 2
II. POWER CORDS AND USER DOCUMENTATION ................................................................................................... 2
III. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS .................................................................................... 2
IV. TRADE (IMPORT/EXPORT) COMPLIANCE DATA................................................................................................... 2
V. SYTEM DIMENSION AND WEIGHT ........................................................................................................................ 2
VI. PERFORMANCE DATA (ErP Lot 3 information is located in section XIII Appendix A) .......................................... 2
VII. PRODUCT MATERIALS INFORMATION ................................................................................................................. 2
VIII. PACKAGING ............................................................................................................................................................ 4
IX. BATTERIES .............................................................................................................................................................. 4
X. DESIGN FOR ENVIRONMENT ................................................................................................................................ 4
XI. RECYCLING/ END-OF-LIFE SERVICE INFORMATION .......................................................................................... 4
XII. HELPFUL LINKS ....................................................................................................................................................... 4
XIII. APPENDIX A: ErP Lot 3 Product (Energy Consumption) Information ................................................................ 5
STATEMENT OF COMPLIANCE
This product has been determined to be compliant with the applicable standards, regulations, and directives for the
countries where the product is marketed. The product is affixed with regulatory marking and text as necessary for
the country/agency. Generally, Information Technology Equipment (ITE) product compliance is based on IEC and
CISPR standards and their national equivalent such as Product Safety, IEC 60950-1 and European Norm EN 60950-1
or EMC, CISPR 22/CISPR 24 and EN 55022/55024. Dell products have been verified to comply with the EU RoHS
Directive 2011/65/EU. Dell products do not contain any of the restricted substances in concentrations and
applications not permitted by the RoHS Directive.
EMC Emissions Class refers to one of the following use environments:
EMC Class B products are intended for use in residential/domestic environments but may also be used in non-
residential/non-domestic environments.
EMC Class A products are intended for use in non-residential/non-domestic environments. Class A products
may also be utilized in residential/domestic environments but may cause interference and require the user to
take adequate corrective measures.
For Product Safety and EMC compliance, this product has been assigned a unique regulatory model and regulatory
type that is imprinted on the product labeling to provide traceability to the regulatory approvals noted on this
datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type including
marketing names other than those listed on this datasheet.ErP compliance is tied to the CE mark.
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, 1907/2006) is the European Union’s
(EU) chemical substances regulatory framework. Dell complies with the REACH directive. For information on SVHC
(Substances of Very High Concern), see www.dell.com/REACH.
Compliance documentation, such as certification or Declaration of Compliance for the product is available upon
request to regulatory_compliance@dell.com . Please include product identifiers such as marketing name,
regulatory module, regulatory type and country that compliance information is needed in request.
Product Safety, EMC & Environmental Datasheet
Revision A09Page 1
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Environmental (Voluntary Marks)
Country
Approval
Compliance
Japan
Green PC Label
Yes
South Korea
Eco Label
Yes
USA
California Energy Commission
Yes
China
China Energy Label
Yes
Australia/New Zealand
MEPS
Yes
Mexico
MEL
Yes
Depth,
mm
Width,
mm
Height,
mm
Weight, kg
430
292
37.8
3.8 Kg
(depending upon installed options)
1
1
Part
Flame Retardant
Motherboard
<15% TetrabromobisphenolA (TBBPA)
I. GLOBAL ENVIRONMENTAL INFORMATION
II. POWER CORDS AND USER DOCUMENTATION
Dell products are provided with the power cord and user documentation suitable for the intended country of
delivery. Products that are relocated to other countries should use nationally certified power cords and plugs
to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user
documentation in other languages is available for your market.
III. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS
Dell Inc.
Department: Global Regulations and StandardsMS: PS4-30Round Rock, Texas 78682, USARegulatory_Compliance@Dell.com
IV. TRADE (IMPORT/EXPORT) COMPLIANCE DATA
For any questions related to importing & exporting classification of Dell products, please obtain information
from the following link: www.dell.com/import_export_compliance or send request to
WW_Export_Compliance@dell.com
V. SYTEM DIMENSION AND WEIGHT
VI. PERFORMANCE DATA (ErP Lot 3 information is located in section XIII Appendix A)
VII. PRODUCT MATERIALS INFORMATION
Information on Dell’s material use is available here.
To review Dell’s Restricted Material Guidance document click here.
The case material is, A/C: >PC+ABS-TD15 FR(40)< ; B: >PC< ; D/E: >PC-CF20 FR(40)<;
This product contains 0% post-consumer recycled plastic
Marking of plastic parts greater than 25 grams are done in accordance with ISO 11469 (see below)
Product is BFR/PVC Free Yes No
Flame Retardants Used in Motherboard
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as
listed above.
Product Safety, EMC & Environmental Datasheet
Revision A09Page 2
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Resin Material Name
Marking per ISO 1146
9:2000, 11469:1996
Flame
Retardant
Marking per
ISO 1043-4
(i.e. FR(16),
FR(40), etc.)
Flame Retardant
(i.e. TBBPA, triaryl
phosphate ester, etc.)
List
applicable
R-Phrase(s)
or Hazard
Statement(s)
per EU
Directive
67/548/EEG
or 1272/2008
AAP20_LOG_LOW
>PC-CF20 FR(40)<
FR(40)
Organo Phosphate
NA
AAP20_BOTTOM_DOOR
>PC-CF20 FR(40)<
FR(40)
Organo Phosphate
NA
AAP20_LOG_LOW_D_FRAME
>PC+ABS-TD15 FR(40)<
FR(40)
Organo Phosphate
NA
AAP20_LCD_COVER_FRAME
>PC+ABS-TD15 FR(40)<
FR(40)
Organo Phosphate
NA
AAP20_LCD_BEZEL_TS
>PC<
FR(65)
Potassium
Perfluorobutane
Sulfonate
NA
AAP20_LCD_BEZEL
>PC<
FR(65)
Potassium
Perfluorobutane
Sulfonate
NA
AAP20_LOG_UP
>PC+ABS-TD15 FR(40)<
FR(40)
Organo Phosphate
NA
AAP20_LCD_ANTENNA_COVER
>PC+ABS-TD15 FR(40)<
FR(40)
Organo Phosphate
NA
Number of bulbs
Average per bulb
0
NA
2
Flame Retardants Used in Mechanical Plastic Parts > 25 grams
Mercury Information
DECLARATION OF CONFORMITY WITH GAZETTE OF INDIA: EXTRAORDINARY, E-WASTE (MANAGEMENT &
HANDLING) RULES (INDIA ROHS)
Dell Inc. declares that all Dell branded products have been designed and manufactured in compliance with E-Waste
(Management & Handling) Rules2 on the reduction in the use of hazardous materials in the manufacture of electrical
and electronic equipment and their maximum allowed concentrations by weight in the homogenous material
(except for the exemptions listed in schedule II).
Substance Concentration
Lead 0.1%
Mercury 0.1%
PBB (Polybrominated Biphenyls) 0.1%
PBDE (Polybrominated Diphenyl Ethers) 0.1%
Hexavalent Chromium 0.1%
Cadmium 0.01%
Compliance has been verified via internal design controls, supplier declarations, and/or analytical test data. The
undersigned below possesses the complete technical documentation relating to the declaration of compliance.
For additional information please visit:
Restricted Material Compliance www.dell.com/environmental_information
E-Waste (Management & Handling) Rules 2011, by the Ministry of Environment & Forests, Government of India dated
May 12, 2011.
Product Safety, EMC & Environmental Datasheet
Revision A09Page 3
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Information on Dell’s sustainable packaging effort available here.
Additional materials restricted in Packaging as per Dell’s Restricted Material Guidance document found here.
IX. BATTERIES
Below is a listing of batteries that could be present in the product:
X. DESIGN FOR ENVIRONMENT
Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing.
For more information on product Recyclability please visit www.dell.com/environmental_information
XI. RECYCLING/ END-OF-LIFE SERVICE INFORMATION
Take back and recycling services are offered for this product in certain countries. If you want to dispose of
system components, contact Dell for instructions by emailing recycling_emea@dell.com or visit
www.dell.com/recyclingworldwide and select the relevant country.
XIII. APPENDIX A: ErP Lot 3 Product (Energy Consumption) Information
The ErP Lot 3 Standard includes requirements for certain product specific information to be provided by the
manufacturer. This is applicable to Desktops, Integrated Desktops, Notebooks, Tablets, Slates, Notebook Thin
Clients, Desktop Thin Clients, Workstations, Mobile Workstations, Computer Servers, and Small Scale Servers.
* Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed
above. Energy consumption is tested at 230 Volts / 50 Hz.
Product Safety, EMC & Environmental Datasheet
Revision A09Page 5
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Service Level
Sound Power
(L
WAd
, bels) (1 bel=10 decibels,
re 10
-12
Watts)
Sound Pressure
Bystander Position
(L
pAm
, decibels) (re 2x10-5 Pa)
Hard Drive Accessing
3.5
21.7
Optical Drive
Accessing
Idle
2.7
16.5
Energy Consumption*
Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing
power consumption. Dell offers energy calculators that help estimate power needs, potential emissions
avoidance and potential cost savings. Click here for Dell’s Client Energy Savings Calculator, Data Center
Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available here
* This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the
software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
For more details visit www.dell.com/environmental_information
Internal Power Supplies (not tested by ECOVA)
Desktop computer, integrated desktop computer, desktop thin client, workstation, and small- scale server
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Computers Category C:
Product Safety, EMC & Environmental Datasheet
Revision A09Page 6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.