Delfield SSHRI-S User Manual

Delfield

™

®

Specication Line®

Self-Contained Solid Door Heated Roll-In

Models

One section Two section Three section

SSHRI1-S SSHRI2-S SSHRI3-S Stainless exterior and interior full door

SAHRI1-S SAHRI2-S N/A Stainless exterior and aluminum interior full door

SMHRI1-S SMHRI2-S N/A Stainless front aluminum exterior and interior full door

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity _________________ _______________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ _____________________ ___________

Specication Line®: Solid Door Heated Roll-In

SSHRI2-S

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.

Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self
closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the

Standard Features

Stainless steel interior and exterior (SS)

•
Stainless steel exterior, aluminum

•
interior (SA)
Aluminum interior and exterior,

•
stainless front (SM)
Built in door locks with heavy duty

•
strikes
Recessed metal door handle

•
Exterior digital thermometer with high/

•
low temperature alarm
Easy to use electronic control

•
Easy access “ip up” shroud

•
High density foamed in place

•
environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps
energy costs low
Stainless steel breaker strips

•
Stainless steel interior door liner

•
Two year parts & labor warranty

•

door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.

Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular ns. High speed blower provides uniform airow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/o switch is located on
the front exterior of the cabinet.

Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.

Options &
Accessories

•

•

•

•

•

•

•

•

•

Security (prison) package
Door eld rehingability
Stainless steel back
Laminate on front, sides and
back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
230-50-1 electrical
220-60-1 electrical

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

Delfield

™

®

PLAN VIEW

34.00”

86.4cm

34.00”

86.4cm

66.00”

167.6cm

98.00”

248.9cm

30.00”

76.2cm

34.00”

86.4cm

34.00”

86.4cm

62.00”

157.5cm

94.00”

238.8cm

66.00”

167.6cm

98.00”

248.9cm

34.00”

86.4cm

34.00”

86.4cm

62.00”

157.5cm

94.00”

238.8cm

98.00”

248.9cm

34.00”

86.4cm

94.00”

238.8cm

30.00"

76.2cm

72.00"

182.9cm

89.00”

226.1cm

34.00”

86.4cm

34.00”

86.4cm

66.00”

167.6cm

98.00”

248.9cm

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

30.00”

76.2cm

34.00”

86.4cm

34.00”

86.4cm

62.00”

157.5cm

94.00”

238.8cm

66.00”

167.6cm

98.00”

248.9cm

34.00”

86.4cm

34.00”

86.4cm

62.00”

157.5cm

94.00”

238.8cm

98.00”

248.9cm

34.00”

86.4cm

94.00”

238.8cm

30.00"

76.2cm

72.00"

182.9cm

89.00”

226.1cm

66.00”

167.6cm

98.00”

248.9cm

34.00”

86.4cm

34.00”

86.4cm

62.00”

157.5cm

94.00”

238.8cm

SSHRI1-S, SAHRI1-S,

SMHRI1-S

PLAN VIEW

SSHRI2-S, SAHRI2-S, SMHRI2-S

PLAN VIEW

SSHRI3-S

ELEVATION VIEW

SSHRI1-S, SAHRI1-S,

SMHRI1-S

ELEVATION VIEW

SSHRI2-S, SAHRI2-S,

SMHRI2-S

ELEVATION VIEW

SSHRI3-S

Self-Contained Solid Do or Heated Roll-In

Mechanical Data

MODEL NUMBER VOLTAGE AMPS

SSHRI1-S, SAHRI1-S, SMHRI1-S 120/208-240 9.0 36.15 N/A N/A N/A 2160

Specication Line®

SSHRI2-S, SAHRI2-S, SMHRI2-S 120/208-240 12.2 74.72 N/A N/A N/A 3840

SSHRI3-S 120/208-240 10.0 113.28 N/A N/A N/A 4272

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

STORAGE

CU.FT.

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

SHELVES SQ.FT.

Printed in the U.S.A.
DSSSHRI
06/08

NO. OF

SHELVES

ALL MODELS

UNIT H.P. MAX WATTS SHIP WEIGHT

459lbs

(208kg)

704lbs

(319kg)

1008lbs
(457kg)

END VIEW

NEMA

PLUG

N/A N/A

N/A N/A

N/A N/A

ENERGY

(KWH)